You searched for: Ovens

Supplier: Binder

With forced convection and enhanced timer functions, the Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ preheating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with stainless steel chambers, which are designed for routine applications. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Heratherm™ large capacity ovens were designed for larger samples or high sample volume. All models have a large, easy to view, vacuum fluorescence display and simple to use touch button operation which is controlled by a microprocessor and automatic over-temperature alarm system to protect samples. All units are available in convenient 230 V version - no special connection required.

Supplier: Thermo Scientific

Vacuum drying ovens with stainless steel chambers, vacuum fittings, tubing and ball valve. Units are designed for gentle drying of heat-sensitive samples and have adjustable temperature limit protection, protection Class 2 (DIN 12880, Part 1).

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior. The timer allows the oven to be turned on or off after a preset time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Lindberg/Blue M Moldatherm box furnaces are versatile selection for a variety of industrial and laboratory applications.

Supplier: UVP ULTRA VIOLET PRODUCTS

The ultimate oven for multiple motion options, the Multidizer oven comes with both a rotary wheel (in the lower chamber) and a reciprocating shaker tray (in the upper chamber). It also offers a rocker tray and/or orbital motion tray as options. These are to accommodate different containers and usages. The lower chamber of the unit is the same as for the HB-1000 and operates independently of the top chamber.

Supplier: Thermo Fisher Scientific

Heating and drying ovens with coated or stainless steel exterior (SS models). The timer allows the oven to be turned on or off after a pre-set time, with a choice between weekly, hourly or real time settings. Units with natural convection are ideal for gentle drying and heating, to protect delicate samples. Units with forced convection have adjustable fan speed and are suitable for faster drying and heating, and offer superior temperature uniformity.

Supplier: Thermo Fisher Scientific

Thermolyne™ muffle furnaces offer heating solutions for a number of application needs, from general laboratory use to industrial applications. Units are ideal for fast heat up and temperature control up to 1200 °C. The furnaces are used for chemical analysis, materials testing, determination of volatiles in waste water treatment plants, industrial plants, pharmaceutical and cosmetic companies, environmental laboratories, agriculture laboratories and paper manufacturers.

Supplier: BOEKEL SCIENTIFIC

RapidFISH slide hybridisation oven was designed to simplify fluorescent in-situ hybridisations procedures for FFP samples, cell suspensions, and other tissue preparation procedures.

Supplier: BOEKEL SCIENTIFIC

Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: Cole-Parmer

Use and recover volumes as low as 5 ml, ensuring preservation of precious samples.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: Thermo Scientific

For incineration and annealing loss determinations, high temperature drying, materials testing and ashing processes on a laboratory scale. The heating coils are located and protected in T fixtures at the sides of the working area and the chamber inner surfaces are ceramic plates. They are easy to replace, with no renewal of the insulating material necessary. Optimum insulation and heating conditions produce a consistent temperature distribution in the oven chamber: max. fluctuation of 13 K.

Supplier: NABERTHERM

Ovens that are designed for drying and evaporation of solvent-containing materials. Furnace based technology utilised for ovens, units have a 1.4301 (DIN) stainless steel chamber, which is rust-resistant and easy to clean, they feature horizontal forced convection.

Supplier: BOEKEL SCIENTIFIC

The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

Supplier: Mettler - Toledo

The DO308 drying oven is the ideal accessory for the METTLER TOLEDO volumetric or coulometric Karl Fischer titrators. It allows easy and accurate water determination of solid or viscous samples.

Supplier: CEM

Microwave oven, MARSXpress Vessel Starter Set, PFA, 8 place, 55 ml

Supplier: CEM

SAM-255 with IntelliTemp™ infrared temperature control provides rapid drying of all types of samples. Workstation can analyse large sized samples for moisture and solids.

Supplier: CEM

The Phoenix BLACK™ muffle furnace utilises microwave energy to quickly reach temperature and maintain 2,8 m³ (100 ft³) of air flow per minute through the cavity to rapidly ash materials and remove combustion by-products. Unit comes configured with the Sulfated ash option that allows for easy installation of all glassware and provides connections for needed accessories. Manufactured by CEM® Corporation, ISO-9001 certified. This technology is protected under US patent 5,318,754.

Supplier: CEM

The MARS 2 is a microwave acid digestion system that produces an aqueous solution for elemental analysis by ICP, ICP-MS, or AA. Plants, soil, foods, pharmaceuticals, and more can be digested easily, using preloaded methods. For over 30 years, lab technicians have been using MARS systems for sample preparation. With the latest updates to the MARS 2, the process is even easier.

Supplier: CEM

Microwave ashing system and ashing furnace assemblies. Ash samples with unmatched speed, safety, ease-of use, and energy savings with the Phoenix™ Microwave Muffle Furnace. This system will help improve your process control, allow for rapid adjustments, and reduce out-of-specification products. The temperature ramping capabilities of the Phoenix system mean it can be left idle in a non-heated state. This results in significant energy savings versus conventional muffle furnaces that are kept constantly in a high temperature state.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Stainless steel exterior and interior.

Supplier: CEM

This rapid microwave ashing system consists of a microwave heating system containing a 5 L chamber which can be heated to 1000 °C or a 1,8 L chamber which can be heated to 1200 °C using microwave energy.

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.

Supplier: LTE SCIENTIFIC

Floor standing drying cabinets made of rust proofed steel, finished in textured epoxy with four adjustable reinforced chromium plated shelves. The sheathed heating elements, situated below a perforated base plate are vented either by natural convection or, for more rapid drying, via a top mounted extraction system, temperature control is by means of an energy regulator.