Supplier: VWR Collection

VENTI-Line® drying ovens are designed for all standard drying and tempering tasks as well as sterilising glassware. They have a temperature range between 50 to 300 °C and are intended for use in biological, chemical, medical, pharmaceutical and physical laboratories.

Supplier: VWR Collection

DRY-Line® drying ovens are designed for all standard drying and tempering tasks as well as sterilising glassware. They have a temperature range between 50 to 300 °C and are intended for use in biological, chemical, medical, pharmaceutical and physical laboratories.

Supplier: MEMMERT

The range includes natural convection models with a temperature range up to +300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: MEMMERT

UNpa paraffin ovens provide precise and homogenous temperature control of paraffin embedding medium without any loss in quality. UNpa paraffin ovens are designed specifically for reliable sample preparation in the laboratory and have an intuitive and easy to use operating menu plus a high-quality, corrosion-resistant and easily cleanable stainless steel working chamber and housing.

Supplier: NABERTHERM

For charging larger workpieces and annealing boxes.

Supplier: MEMMERT

The UF TS pass through ovens help to minimise contamination when transporting samples or components. They have an easy-to-clean interior, fast recovery times after opening the door as well as homogeneous temperature distribution, this oven is the perfect material lock between the grey room and the cleanroom in the electronics, semiconductor, medicine or pharmaceutical industries.

Supplier: UVP ULTRA VIOLET PRODUCTS

The HybriLinker oven combines an HB-1000 hybridisation oven with a CX-2000 crosslinker with operation independent of one another. The crosslinker portion of the unit has a UV light emission at 254 nm for the bonding of DNA to a membrane in seconds. The UV dose can be entered as either time or microjoules per cm² of energy for accurate exposure.

Supplier: MEMMERT

Reliable, powerful, energy efficient vacuum ovens with separately adjustable thermo shelves which are directly heated ensuring precise temperature control and, thanks to digital pressure control, the chamber load is not only dried at high speed, but also extremely gently in these robust units. Ideal for drying foodstuffs, cosmetics, granulates, watches, books, printed circuit boards, electronic components or injection moulds. All models have a safety glass door with bullet proof inner glass and an anti-splinter external screen. The exterior housing is made of textured stainless steel while the inner chamber is made of hermetically welded, high quality stainless steel (DIN 1.4404).

Supplier: UVP ULTRA VIOLET PRODUCTS

The Hybridiser oven heats up fast and can be stacked to make the best use of available space. The variable speed control enables consistent saturation of samples for washing or hybridising and the carousel can be replaced with a rocker tray as an alternative, if purchased as an accessory.

Supplier: UVP ULTRA VIOLET PRODUCTS

The Minidizer oven is designed as a personal desk-top unit that is both compact and portable. It is ideal for use in start-up laboratories or those with limited space and low usage requirements. The unit cover swings open to allow easy access to the carousel, which can also be removed for easy changing of bottles.

Supplier: NABERTHERM

Hardening boxes are suitable for heat treatment under protective gas and are equipped with a protective gas intlet and outlet. For furnace models such as N 61/H with downward opening doors, the gas ductway is laid through the upper section of the door collar and for larger furnaces with upward opening doors, the supply line is laid through the lower furnace collar.

Supplier: NABERTHERM

These forced convection chamber furnaces provide good temperature uniformity. Due to their compact benchtop design, this series is very well suited for use in laboratories or areas with limited space.

Supplier: NABERTHERM

These furnaces feature heating elements on supporting tubes that radiate freely into the chamber, ensuring particularly short heating times. With the robust lightweight refractory brick insulation, they can reach a max. working temperature of 1300 °C.

Supplier: NABERTHERM

The L 3/11 - L 40/11 muffle furnaces are the ideal choice for daily laboratory use. These high quality models have an advanced and attractive design, and are very reliable. The muffle furnaces have a lift up door as standard.

Supplier: NABERTHERM

The BO series is specially designed for processes in which larger sample quantities must be incinerated. Mainly used in the fields such as ashing of food, thermal cleaning of injection molding tools or determination of annealing loss.

Supplier: NABERTHERM

The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Supplier: NABERTHERM

The LH 15/12 - LF 120/14 chamber furnaces have been trusted for many years as professional chamber furnaces for the laboratory.

Supplier: MEMMERT

The range includes forced convection models with a temperature range up to 300 °C. There is a choice of two different displays, SingleDISPLAY or TwinDISPLAY depending on the application.

Supplier: NABERTHERM

With their convincing price/performance ratio and the fast heat-up rates, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual-shell furnace housing of rust-free stainless steel and their compact, lightweight construction. The heating elements encased in quartz glass tubes make these models reliable partners for your application. The furnaces have Tmax 1100 °C, working temperature of 1050 °C.

Supplier: NABERTHERM

These furnaces feature heating elements on supporting tubes that radiate freely into the chamber, ensuring particularly short heating times. With the robust lightweight refractory brick insulation, they can reach a max. working temperature of 1300 °C.

Supplier: NABERTHERM

The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Supplier: Binder

These drying ovens for limited quantities of solvents, have high temperature accuracy and silicone- and dust-free stainless steel chambers. Units are widely used for applications such as quality assurance of paints or other liquid coatings. FDL ovens feature an MP controller with adjustable ramp function and integrated weekly program timer with real time function.

Supplier: Binder

Universal drying ovens with stainless steel chambers which are ideal for drying and sterilisation applications in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable temperature safety device, Class 2 (DIN 12880) with visual alarm and adjustable ventilation by means of front ventilation slide and rear 50 mm Ø exhaust duct. GLP/GMP compliance is assisted by the optional RS422 interface and APT-COM™ DataControlSystem software.

Supplier: Binder

Robust space-saving oven/steriliser with hydraulic mechanical thermostat and temperature setting via analogue dial indicator thermometer.

Supplier: Binder

Multi-functional drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable temperature safety device, Class 2 (DIN 12880) with visual alarm and adjustable ventilation by means of front ventilation slide and rear 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change. GLP/GMP compliance is assisted by the RS422 interface and by optional APT-COM™ DataControlSystem software.

Supplier: Binder

The Binder FP series of material test chambers with mechanical convection and program functions provide reliably short drying times and particularly fast heating – even for chambers under full loads.

Supplier: Binder

With forced convection, the Avantgarde.Line heating and drying chambers offer quality and process reliability. The wide temperature range of up to 300 °C, mean these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. The APT.line™ pre-heating chamber technology gives homogeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. The units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.

Supplier: Binder

The VD series of vacuum drying chambers provide fast gentle drying of non flammable solvents, delivering impressive performance through their precise temperature control and gentle drying. Expansion rack technology also ensures optimal heat transfer, shelves provide flexible placement, and the interior of the chamber is easy to clean. The VDL series of safety vacuum drying chambers ensures maximum safety when drying flammable organic solvents, and have been safety tested by a state recognised test institute (GS mark). VD/VDL units can also be purchased as modular options with vacuum pump and pump chamber to form a complete system.

Supplier: Binder

Universal drying ovens with stainless steel chambers which are ideal for use in the pharmaceutical and chemical industries, biotechnology, medicine and universities. Ovens feature one temperature program ramp, an adjustable TWB class 2 safety device with visual alarm and adjustable ventilation by means of ventilation slide and 50 mm Ø exhaust duct. Fast recovery times after opening the door or air change.

Supplier: Binder

With natural convection, Avantgarde.Line heating and drying chambers offer quality and process reliability. With a wide temperature range up to 300 °C, these drying ovens can be used in all applications. Short heat up times and large power reserves are ideal for applications in science, research and industry. APT.line™ pre-heating chamber technology gives homegeneous temperature distribution and excellent temperature uniformity and fluctuation. Units up to 115 litres can be stacked on top of each other to save space. These units have 60 mm insulation which lowers energy consumption and increases performance. All models have a stainless steel chamber with an ergonomic door opening system.