You searched for: Vials

Supplier: THERMO NATIONAL SCIENTIFIC

Shell vials are an economical choice for many routine HPLC applications. Vial selections include clear glass, amber glass or polypropylene. 8×35 mm shell vials are designed specifically for Alcott Positive Displacement autosamplers.

Supplier: Merck

These vials are made of PP with graduations and 9 mm fitting.

Supplier: Merck

Autosampler vials are made of Type1 borosilicate glass.

Supplier: METROHM

General use vial, 6,00 ml, Glass, Clear, Ø×H: 22×38 mm, Non sterile, Cap included: No

Supplier: Hycultec

Brown glass deepfreeze vials in a PS box with coloured plastic screw caps.

Supplier: MURRAY S

These vials without closure are made from neutral glass.

Supplier: DELTALAB

These flat bottom screw thread vials are made of ultra clear borosilicate glass.

Supplier: THERMO NATIONAL SCIENTIFIC

These crimp/snap top low volume sample vials can be used with 6, 7 and 8 mm autosampler trays. They are made of borosilicate glass, type 1, class A.

Supplier: LA PHA PACK

Standard glass or plastic vials for GC and HPLC, micro-inserts, closures and kits. Can be used universally on almost all autosamplers, preferred type of vial for Waters and Agilent.

Supplier: BIOCISION

TruCool® leak-proof cryogenic vials feature a screw cap with a thermally-fused gasket to ensure a tight seal. The gasket is a co-molded thermoplastic elastomer (TPE) layer, which prevents leaking, slipping and risk of contamination. The gasket is 95 kPa certified to provide a leak-proof seal. These vials are sterile and individually barcoded with a unique identifier which can be read with common barcode readers. Ideal for use in CoolRack® CF cryogenic vial modules and CoolCell® alcohol-free cell freezing containers. Recommended for use in vapor phase LN₂ only.

Supplier: VWR Collection

These scintillation vials made from borosilicate glass fit all standard counting equipment for liquid scintillation systems.

Supplier: Merck

Chromatography vial, Headspace crimp neck, 10,00 ml, Glass, Clear, Ø×H: 23×46 mm, Flat bottom, Non sterile, Cap included: No

Supplier: PerkinElmer

This screw top waste and wash vial is manufactured from type I borosilicate glass.

Supplier: SEMADENI

These scintillation vials are made of high quality material and good solvent resistance with good stability.

Supplier: THERMO NATIONAL SCIENTIFIC

These vials are made of superior quality 33 expansion borosilicate clear glass.

Supplier: Merck

These certified vial kits are designed, engineered, and manufactured for optimal performance in HPLC, GCMS, and LCMS. The vial, cap, and septa are batch tested to confirm that the quality of each component will be the same, time after time.

Supplier: PerkinElmer

Manufactured from Type I borosilicate glass, which meets all USP, JP, and EP Pharmacopeia requirements. These vials are manufactured to specific tolerances that are guaranteed to fit and perform with PerkinElmer and non-PerkinElmer instruments.

Supplier: THERMO NATIONAL SCIENTIFIC

Vial insert, 0,20 ml, Glass, Ø×H: 5×29 mm, Conical bottom, Non sterile, Cap included: No

Supplier: THERMO NATIONAL SCIENTIFIC

These convenience vial kits contain caps with pre-inserted septa that are not attached to vials.

Supplier: LA PHA PACK

Clear and amber glass vials with a rounded or flat bottom and volumes from 5 to 20 ml and closures. A rounded bottom vial is more sturdy and resistant to high pressure during the heating process. Flat bottom vials are more appropriate for certain instruments.

Supplier: THERMO NATIONAL SCIENTIFIC

Thermo Scientific™ national EPA vial convenience kits are designed for discrete water sampling applications.

Supplier: Sterilin

Vial insert, 6,00 ml, PP, Ø×H: 14,5×58 mm, Flat bottom, Non sterile, Cap included: Yes

Supplier: Merck

The pre-assembled sampling vials with open top screw caps are available with a variety of closures and septum.

Supplier: VWR Collection

These general-purpose vials with screw cap are made from borosilicate glass. They are available in either a short form or capsule style. The cap on the vial is the same diameter as the body, fitting flush to the shoulder.

Supplier: Merck

Chromatography vial, Headspace screw neck, 20,00 ml, Glass, Clear, Ø×H: 22,5×75,5 mm, Round bottom, Non sterile, Cap included: No, Cap size: 18 mm

Supplier: THERMO NATIONAL SCIENTIFIC

Chromatography vial, Fire-polished neck, 1,00 ml, PP, Clear, Ø×H: 8×40 mm, Non sterile, Cap included: Yes, Cap size: 8 mm, Cap material: PE

Supplier: THERMO NATIONAL SCIENTIFIC

These storage vials provide constant pH for duration of sample storage life and are available in the capacity ranges of 2 to 40 ml. Manufactured in Type 1, Class A, 33 expansion borosilicate glass or 51A amber glass.

Supplier: DWK Life Sciences

Insert is made of durable polypropylene (PP) and is designed for vials with a step.

Supplier: NEOLAB

Due to their technical geometry, the neochrom® threaded vials with ND9 can be used on all popular autosamplers.

Supplier: THERMO NATIONAL SCIENTIFIC

Glass vials are precrimped with an aluminium seal and PTFE/red rubber septum.