You searched for: Sterilisation Indicators

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: LIOFILCHEM

Biological indicators for validating sterilisation using steam sterilisation (autoclaves).

Supplier: VP Medical Packaging

Sterilisation indicator, Bowie-dick single use test pack (prime-pack)

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam sterilisation (autoclaves).

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using steam (autoclaves), VHP (isolators), dry heat and irradiation processes.

Supplier: MICRONOVA

Saturated crepe paper/synthetic poly isoprene adhesive in plastic core. It is a proven method of positively confirming a completed sterilisation cycle in both gravity discharge and vacuum autoclaves. Green indicator lines change to black when proper levels of steam pressure and temperature have been achieved. After use, the tape removes quickly and completely, leaving minimal residue or staining.

Supplier: LIOFILCHEM

Biological indicators for validating the sterilisation using VHP in isolators.

Supplier: 3M MEDICAL

Integrating indicator for use in determining whether the process conditions necessary for sterilisation were met inside each pack. Can be used in all 118 to 138 °C (245 to 280 °F) steam sterilisation cycles.

Supplier: Brand

This self-adhesive crepe indicator tape turns from white to brown upon autoclaving.

Supplier: 3M MEDICAL

Indicator tapes are Class 1 process indicators used for exposure monitoring. They provide assurance to the operator handling the processed items that the pack has been exposed to the sterilisation process without the need to open the pack or check load control records. Optional tape dispensers are available for easy dispensing of indicator tapes.

Supplier: 3M MEDICAL

An exposure monitor that securely seals packs, and provides a visual assurance that the package has been exposed to the steam sterilisation process.

Supplier: Texwipe

Sterilisation indicator, Labels, Cleanroom labels, autoclavable, Length: 50 mm, Width: 50 mm

Supplier: 3M MEDICAL

This steam chemical indicator offers a distinct off-white to dark brown/black color change when exposed to steam sterilization.

Supplier: 3M MEDICAL

This chemical indicator tape is designed for use as packaging tape and for the immediate identification of items exposed to dry heat processing.

Supplier: KARTELL

Adhesive tape.

Supplier: PRECISION DYNAMICS TIMEM

White adhesive crepe tape, for use in standard autoclaves.

Supplier: KARTELL

Adhesive tape.

Supplier: BAG

These indicator strips turns green to black colour.

Supplier: S▄DPACK MEDICA

The indicator turns a different colour depending on the time and temperature of sterilisation:

Supplier: 3M MEDICAL

Rapid readout biological indicator for EO (ethylene oxide) sterilization.

Supplier: CROSSTEX

Biological sterilisation indicators are used to perform sterilisation cycle validation. They are created by inoculating spore suspensions of certified population and resistance onto paper strips.

Supplier: 3M MEDICAL

These chemical integrators are Class 5 integrating indicators used for pack control as a method for monitoring sterilisation process conditions inside each pack. They can also be used inside a process challenge device (PCD) to release processed items, excluding implants (load control), however they do not replace the use of biological indicators.

Supplier: S▄DPACK MEDICA

Tapes indicators by dry heat sterilisation.

Supplier: 3M MEDICAL

The 3M™ Comply™ Steam Chemical Indicator 1251 is a paper strip 1,5 cm wide by 20 cm long printed with a chemical indicator ink that turns from red to green when exposed to the steam sterilisation process.

Supplier: CROSSTEX

Spore suspensions are pure suspensions of viable spores from specific organisms of known resistance to various sterilisation processes. These biological indicators are used to validate that bacterial spores have been completely destroyed. The indicator is simply processed with the load in the steriliser. No bacterial growth after culturing indicates that the sterilisation process is effective. Growth indicates ineffective sterilisation.

Supplier: CROSSTEX

Sterilisation indicator, Spore Suspension, Sterilisation: Steam, Bacillus atrophaeus, cell line 9372: spore suspension (24 month shelf life), population 10^8/0,1 ml - steam sterilisation process

Supplier: CROSSTEX

Spore threads are prepared from Geobacillus stearothermophilus. These are designed to be placed directly into a device and utilised to monitor steam sterilisation process efficacy.

Supplier: CROSSTEX

Sterilisation indicator, Spore Strips, Sterilisation: ETO, Bacillus atrophaeus cell line 9372: mini strip 10⁶ (24 month shelf life) / sterilisation process: EO, Length: 10 mm, Width: 2 mm

Supplier: 3M MEDICAL

Biological indicators provide the best assurance of sterility by challenging the steriliser with quantifiable, highly resistant spores. After sterilisation, the vial is 'crushed' to join the growth media with the processed spore strip. A colour change to yellow indicates surviving spores and a positive result. Biological indicators are used for load control monitoring which is the process by which a load is monitored and released based on the result of a biological indicator (BI) in a test pack.

Supplier: S▄DPACK MEDICA

Steam sterilisation. The labels change colour from pink to dark brown after sterilisation.