You searched for: Microplate Seals

Supplier: Brand

Highly transparent film made of polyester is suitable for Real-Time PCR measurements. Temperature range: −40 to +120 °C.

Supplier: iST Scientific Ltd

Clear pierceable film ideal for PP, PE, PS and COC plates. Suitable for use with the ABI 3730 sequencer as the thinner structure pierces more easily.

Supplier: THERMO MATRIX TECHNOLOGIES

The gas permeable adhesive seal provides a simple and effective way of venting cultures whilst providing a barrier against contaminating bacteria. When used in conjunction with Thermo Scientific storage plates, bacterial growth can be increased by over 50%, compared to plates sealed with an aluminium foil seal or sealing mat.

Supplier: Brand

Aluminium sealing film can be pierced easily with a pipette tip for sample removal. Temperature range: −80 to +120 °C.

Supplier: Brand

Cover mats reduce the maximum volume of wells.

Supplier: Brand

Microplate seal, Cap strip, Single sheet/mat/strip, Cap strips, 8-strip, domed top, PCR cap strips of 8, clear, domed, for skirted low profile PCR plates

Supplier: iST Scientific Ltd

Non woven gas permeable and peelable seal for PP and PS plates. Suitable for short term incubation, agriculture and seed storage, insect storage, cell culture.

Supplier: THERMO MATRIX TECHNOLOGIES

For long and short term storage of samples in microplates, and for sealing over pierced foil seals.

Supplier: iST Scientific Ltd

Transparent, peelable film for PCR.

Supplier: G-Biosciences

Acetate film with acrylic adhesive. This self-adhesive microplate sealing tape is suitable for sealing both 96-well and 384-well plates. The precut, pressure-senstive tape seals and reseals the surface of the plates during incubations to prevent evaporation and allow more vigorous mixing. The tape will reseal the plates 2 to 3 times.

Supplier: iST Scientific Ltd

Heat sealing offers a 100% effective method for plate sealing for a complete seal integrity, as well as being quick and cost effective. The ClearASeal Peel is an optically clear laminate film forming a peelable seal to polypropylene, polyethylene, polystyrene, polycarbonate and cyclic olefin copolymer (COC) plates

Supplier: iST Scientific Ltd

Peelable foil laminate for polyproylene plates. Suitable for PCR, low temperature, short term compound storage, short term room temperature compound storage (less than 5 days).

Supplier: Brand

Black sealing film made of vinyl is highly suitable for fluorescence measurements because of its light-absorbing characteristics. Temperature range: −40 to +80 °C.

Supplier: MICROSOLV

Microplate seal, Mat (96 wells), Single sheet/mat/strip, Organic chemical resistant sealing mat for 350 µl U-2D™ plate system, non slit

Supplier: iST Scientific Ltd

Clear strong bonding film ideal for water thermal cyclers. Suitable for qPCR, PCR (water bath thermal cycling), storage, sample inspection, disposal of hazardous materials, use with DMSO.

Supplier: iST Scientific Ltd

Clear, non-tacky, pressure sensitive film for qPCR plates (96- or 384-well) and situations where fluorescence is experienced.

Supplier: iST Scientific Ltd

Pierceble and peelable, high grade foil for polystyrene plates with good solvent resistance including DMSO. Suitable for PCR low temperature compound storage, short term room temperature compound storage.

Supplier: Brand

Gas permeable films (sterile/non sterile) are popular for growing cells and microorganisms. Temperature range: −20 to +80 °C.

Supplier: iST Scientific Ltd

Transparent perforated gas permeable film. Suitable for bacterial culture, eukaryotic cell culture.

Supplier: Brand

Chemical resistant PE/PP film offers adhesive-free areas over the wells to avoid contamination. Furthermore, it can be pierced easily with a pipette tip (for sample removal). Temperature range: −40 to +90 °C.

Supplier: OMEGA BIO-TEK

AeraSeal is a 114 µm thick, hydrophobic porous film with medical-grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.

Supplier: Simport Scientific

Transparent adhesive sealing film is ideal for reducing cross contamination and/or spill over in PCR applications. 

Supplier: Brand

Polyester flims suitable for PCR and Real-Time PCR measurements. Temperature range: –40 °C to +120 °C.

Supplier: Simport Scientific

Superflex™, Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Closure for SuperFlex™ 96-well PCR plates, PP, Clear, Non sterile

Supplier: Brand

This film is ideal for PCR, ELISA and sample storage. Due to its adhesive, it can be used down to –80 °C, is DMSO resistant and resistant to common solvents.

Supplier: iST Scientific Ltd

Peelable, strong bonding foil for polypropylene plates. Suitable for PCR, specifically water thermal cyclers, storage of solvents and other organics, including acids and alkaline, also for long term storage and transportation at low temperature.

Supplier: PRIMERDESIGN

Microplate seal, Cap strip, Single sheet/mat/strip, Cap seals, Cap seals for BrightWhite 96-well plates, 8-strips

Supplier: MP Biomedicals

Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Plate sealer

Supplier: MP Biomedicals

Clear adhesive seals for multiwell plates and tissue culture plates.

Supplier: EPPENDORF

Ensure airtight sealing of your PCR plates with Eppendorf® PCR films and foils. Tailor your choice to your assay needs, like the Masterclear® real-time PCR film, optimal for qPCR with its superior optical characteristics, or heat-sealing options for the best evaportion protection.