You searched for: Microplate Seals

Supplier: Thermo Fisher Scientific

Round or square capped mats for sealing 96-well storage plates.

Supplier: VWR Collection

Polyester film with acrylic adhesive. These non pierceable films in sheeted-roll format are recommended for ELISA tests, general incubation and short-term storage.

Supplier: THERMO MATRIX TECHNOLOGIES

SepraSeal® and DuraSeal® capping systems offer a pierceable, individual tube sealing solution. They are made from thermoplastic elastomer (TPE) with colorants and are DMSO resistant.

Supplier: Trajan Scientific and Medical

Pure-Pass sealing mats protect wells from leaks, contamination and evaporation during sampling and storage.

Supplier: VWR Collection

These films are 240 µm thick white vinyl with adhesive, for use with white microplates. Light reflective properties of the film, when used to seal clear bottom plates, maximise the sensitivity of bioluminescence and chemiluminescence assays in bottom-reading luminometers. White films have also been used as a backing matrix for microscopy of punch-out samples from filter plates.

Supplier: VWR Collection

Aluminium foils, 75,7 µm thick, for use with 96 or 384 well plates. Fit inside the rim of raised rim plates. These foils have one partial width end tab. Available non sterile only.

Supplier: VWR Collection

Aluminium foils with biologically inert adhesive. These foils are easily pierced by manual or automated pipette tips, for sample recovery without generation of aerosols or cross-contamination.

Supplier: Avantor

Suitable to use with J.T.Baker® Plate Round Well 43001-0010, 43001-0016 or 43001-0116.

Supplier: VWR Collection

These 106,7 µm thick vinyl films with 20 µm adhesive layer are designed for temporary protection of samples in 96-well plates from contamination and evaporation.

Supplier: VWR Collection

Identical to polyester films above, but include a colour dot and white writing area on each end tab for plate identification. End tabs with backing removed adhere to the ends of the plate and are perforated so they can be left in place even if the centre portion of the film is removed. Alternatively, one inscribed colour-coded end tab can be removed and pasted in a laboratory notebook while the other remains on the plate.

Supplier: VWR Collection

These heat resistant 74,9 µm thick films are designed for thermal cycling applications. Polypropylene films are not pierceable. For PCR applications, where piercing with pipette tips or robotic probes is required for product recovery, use aluminium foil films. For real-time PCR applications, where maximum optical clarity is required, use optically-clear polyester films.

Supplier: Thermo Fisher Scientific

Made from polypropylene (PP).

Supplier: VWR Collection

These soft, non permeable 63,5 µm thick aluminium foils, with strong medical grade adhesive, eliminate the need for heat sealing devices or mats during thermal cycling. Compared to other aluminium foils, these foils have less tendency to roll back on themselves when removing the backing paper, and fit well to the plate during application.

Supplier: Thermo Fisher Scientific

VersiCap™ mats are designed to seal VersiPlate 96-well PCR strip tubes, but can be used will all Thermo Scientific strip tubes and 96-well plates.

Supplier: VWR Collection

A 139,7 µm thick hydrophobic porous film with medical grade adhesive for tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth. These rayon films minimise cross-contamination, spillage and evaporation. They allow uniform air and CO₂ exchange for all wells, unlike plate lids which favour exchange for wells near plate edges. Sterile product is packed in tamper evident bags of 25.

Supplier: Thermo Fisher Scientific

Optically clear adhesive plate sealing film designed for qPCR and other fluorescence applications.

Supplier: VWR Collection

These films are 240 µm thick black vinyl with adhesive for use with 96-well, 384-well and 1536-well black microplates. They fit within the edges of raised rim plates and may be applied to either the plate top or bottom. The light blocking and absorbing properties of these films make them ideal for reducing stray light and crosstalk in fluorescence applications and for protecting light-sensitive samples in storage.

Supplier: VWR Collection

Transparent polyester films with strong, non absorbing, non fluorescing, medical grade adhesive for superior performance in qPCR applications. Supplied non sterile.

Supplier: THERMO MATRIX TECHNOLOGIES

Abgene™ SmartCap mat, made from advanced thermoplastic elastomer (TPE), rapidly seals 96 samples at one time in a high-density storage format, affording maximum space saving benefits. Suitable for use with Thermo Scientific™ storage tubes ranging from 0,3 ml to 1,4 ml, the Abgene™ SmartCap Mat maintains a consistent seal down to –80 °C.

Supplier: Thermo Fisher Scientific

These flat cap strips provide an extremely tight seal in UTW (ultra-thin walled) PCR plates. They are an ideal choice for low volume reactions where it is important to minimize vapor loss.

Supplier: Corning

Axygen AxyMat sealing mats can be used in a wide range of temperatures for PCR and storage applications.

Supplier: Thermo Fisher Scientific

Clear polyester film, aluminium foil. Recommended for use in PCR in conjunction with a thermal cycler that has a screw-down or clip-down lid.

Supplier: Thermo Fisher Scientific

Clear, 24-well format Piko® PCR/qPCR film seal allows high transmission of fluorescence across the range of commonly used fluorophores. When used with a Piko® thermal cycler or PikoReal® Real-Time PCR system, sample volumes as low as 5 µl can be used with minimal evaporative loss.

Supplier: Thermo Fisher Scientific

Adhesive seals for microplates. 100 sheets per pack.

Supplier: VWR Collection

VWR®, PCR tubes, Cap strip, Single sheet/mat/strip, Optically clear 8-cap strips for Real-Time PCR plates, PP

Supplier: Corning

Safeguards samples during transport and storage. Ideal for sealing PCR microplates, but also suitable for other microplates.

Supplier: Thermo Fisher Scientific

Designed to protect microplate well contents by facilitating a tight seal.

Supplier: Corning

Axygen®, Microplate seal, Heat sealing film/foil/tape (96/384 wells), Single sheet/mat/strip, Sealing film for Axygen® PlateMax™ heat sealer, permanent, ultra clear, for qPCR, PlateMax™ ultra clear permanent heat sealing film for qPCR, Non sterile

Supplier: Thermo Fisher Scientific

Microplate sealing tape consisting of pre-cut, pressure-sensitive sheets for sealing the surface of standard 96-well or 384-well microplates during incubation steps.

Supplier: VWR Collection

Rayon film with medical grade adhesive. Hydrophobic, porous film in sheeted roll format for sealing tissue culture plates, bio-blocks, and 96-well plates where gas exchange is necessary for cell or bacterial growth.