Order Entry
Export
Orders LinkContactUsLinkComponent
  | Avantor

Gas Tubes

Gas Tubes

Fritted glass gas tubes are used for introducing gases or liquids into a test tube or flask reaction. The instruments successfully scrub gas in a liquid to saturate or dry gas streams. Gas Tubes with porous glass disc bottom provide a large surface area where the gas and liquid stages meet. Slightly angled models permit precise positioning into flask and eliminate stirring paddle requirement. Tip porosity ranges, outer diameters, and lengths vary to fit desired container.

  |
 
Gas detection tube for sulphuric acid

Gas detection tube for sulphuric acid

Supplier: Dräger

The data below is representative for use with an Accuro® pump, a hand operated bellows pump.

Expand 1 Items
Loading...
Gas detection tubes for carbon disulphide

Gas detection tubes for carbon disulphide

Supplier: Dräger

Operating conditions: 0 to 40 °C ; up to 30 mg/l H₂O and for tube 5/a: 3 to 15 mg/l H₂O absolute humidity.

Expand 3 Items
Loading...
Gas detection tubes for hydrochloric acid

Gas detection tubes for hydrochloric acid

Supplier: Dräger

To measure the 'spot concentrations' of hydrochloric acid in the air with an Accuro® pump - Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Expand 3 Items
Loading...
Gas dispersion tube, SP Bel-Art

Gas dispersion tube, SP Bel-Art

Supplier: Bel-Art Products, a Part of SP

HDPE gas dispersion tube. Bell-mouthed fitting with a sealed-in, coarse porosity Fritware® PE disc at the large end.

Expand 1 Items
Loading...
Gas detection tubes for ethylene oxide

Gas detection tubes for ethylene oxide

Supplier: Dräger

To measure the 'spot concentrations' of ethylene oxide.

Expand 2 Items
Loading...
Gas detection tube for phosphine

Gas detection tube for phosphine

Supplier: Dräger

To measure the 'spot concentrations' of phoshine for use with an Accuro® pump.

Expand 5 Items
Loading...
Gas detection tube for xylene

Gas detection tube for xylene

Supplier: Dräger

To measure the 'spot concentrations' of xylene for use with an Accuro® pump. Cross sensitivity: Styrene, vinyl acetate, toluene, ethyl benzene and acetaldehyde are indicated, but with different sensitivities. No interference by:

Expand 1 Items
Loading...
Gas detection tube for trichloroethylene

Gas detection tube for trichloroethylene

Supplier: Dräger

To measure the 'spot concentrations' of trichloroethylene in water and waste water for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Expand 1 Items
Loading...
Gas detection tube for cyanide

Gas detection tube for cyanide

Supplier: Dräger

To measure the 'spot concentrations' of cyanide. After carrying out the ten strokes the reagent ampoule must be broken, the liquid transferred onto the white separating layer and carefully drawn through with two strokes in cyanide free air using the pump. The indicating layer must not become moist.

Expand 1 Items
Loading...
Gas detection tube, Polytest

Gas detection tube, Polytest

Supplier: Dräger

Qualitative determination of oxidisable substances including measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Expand 1 Items
Loading...
Gas detection tubes for water vapour

Gas detection tubes for water vapour

Supplier: Dräger

To measure the 'spot concentrations' of water vapour for use with an Accuro® pump.

Expand 4 Items
Loading...
Gas detection tubes for hydrocarbons

Gas detection tubes for hydrocarbons

Supplier: Dräger

To measure the 'spot concentrations' of hydrocarbons with an Accuro® pump.

Expand 2 Items
Loading...
Colorimetrics tubes for gas measurements

Colorimetrics tubes for gas measurements

Supplier: GASTEC

Crystal clear gas tubes with distinct colour changes.

Expand 126 Items
Loading...
Short-term tubes for accuro®

Short-term tubes for accuro®

Supplier: Dräger

Different gases and vapours can be detected and measured such as concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Expand 64 Items
Loading...
Gas detection tubes for ammonia

Gas detection tubes for ammonia

Supplier: Dräger

To measure the 'spot concentrations' of ammonia including determination of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces. For use with an Accuro® pump. Other basic substances such as organic amines are indicated as well. For Ammonia 2/a, 5/a, 5b, the indication is not affected by :

Expand 5 Items
Loading...
Gas detection tubes for carbon dioxide

Gas detection tubes for carbon dioxide

Supplier: Dräger

To measure the 'spot concentrations' of carbon dioxide for use with an Accuro® pump. Uses include determination and measurement of concentration peaks, personal exposure in the inhalation area, detection of leaks in pipelines or gas installations, air analysis in sewers, shafts and confined spaces.

Expand 5 Items
Loading...