You searched for: Bottle Closures
Bottle closures allow for safe transfer of liquid media by securely closing jars or roller bottles. Various liners offer additional solvent resistance while permeable styles successfully filter during gas exchange and media sterilization procedures. Protect samples even under harsh freeze-drying lyophilization or autoclaving conditions with temperature tolerant caps. Compression caps for microscale reaction containers support stable observations. Disposable and reusable threaded caps are offered in many colors with or without septas.
GLS 80® wide mouth connection transfer cap system, DURAN®
Supplier: DWK Life Sciences
PP and PTFE.
Expand 1 Items
Multiple distributors for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE or PFA.
Expand 2 Items
Screw cap, GL 45, PMP, DURAN® YOUTILITY®
Supplier: DWK Life Sciences
A highly transparent and ergonomic polymethylpentene cap for GL 45 DURAN® laboratory bottles.
Expand 1 Items
Stretchable silicone lids for laboratory vessels, DURAN®
Supplier: DWK Life Sciences
These stretchable silicone lids are used to close round and square vessels and are available in three sizes and colours, as well as a set of three.
Expand 21 Items
Caps with Aperture, GL 45
Supplier: ROBU GLASFILTER
ROBU® caps with aperture, complete set with silicone washer.
Expand 3 Items
Distributors for reaction vessels (S), BOLA
Supplier: Bohlender
PP screw cap, blue and PTFE body.
Expand 3 Items
Distributors for bottles
Supplier: Bohlender
Black screw cap made of PPS and available with or without stopcocks. Distributor body made of PTFE with 2 or 3 ports with female thread UNF 1/4" 28 G on upper and lower sides and stopcock made of FEP for each port.
Expand 8 Items
Screw caps for laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PBT, red, with PTFE coated seals.
Expand 5 Items
Multiple distributors for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE.
Expand 5 Items
Screw Cap GL 40
Supplier: RIXIUS
Screw cap made of black PP with ALU laminated PE foam insert for thread GL 40.
Expand 2 Items
Multiport connector caps, GL 32, DURAN®
Supplier: DWK Life Sciences
The reusable GL 32 caps allow the smaller 50 ml round or 100 ml DURAN® square bottles to be used be used for sampling, liquid feeding or transfer. Flexible options of 2, 3, or 4 stainless steel tubing connectors.The barbed male tubing connector are suitable for tubing with a 3,2 mm inner diameter such as BPT peristaltic pump tubing.
Expand 3 Items
Seals for threaded connection caps, double sided, BOLA
Supplier: Bohlender
Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE.
Expand 7 Items
Screw Closures for Narrow Neck Bottle Series 301 and 302, LDPE
Supplier: Kautex
LDPE screw closures are packaged in polyethylene bags.
Expand 1 Items
Accessories for connection system GL 45, DURAN®
Supplier: DWK Life Sciences
Screw cap, closed , with seal, GL 14, red
Expand 1 Items
Screw Caps for Wide Neck Bottles
Supplier: RIXIUS
Screw cap, PP, black, with PTFE-inlay , Thread: GL 25
Expand 25 Items
Screw cap for laboratory bottles, GLS 80®, quick release, DURAN®
Supplier: DWK Life Sciences
PP, blue.
Expand 5 Items
Screw caps for square bottles, DURAN®
Supplier: DWK Life Sciences
PP, red or blue.
Expand 7 Items
Screw caps for laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PP, coloured, with lip seal.
Expand 6 Items
Screw closures, quick filling/venting fittings, Nalgene®
Supplier: Thermo Fisher Scientific
PP, white with TPE seal.
Expand 4 Items
Multiple distributors with stopcock for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE.
Expand 2 Items
Screw caps, YOUTILITY™ GL 45, DURAN®
Supplier: DWK Life Sciences
The ergonomic-shaped YOUTILITY™ GL 45 screw cap features a liner less design compatible with both DURAN® original GL 45 bottles and YOUTILITY™ bottles. The cap is moulded from biocomptatible materials making it suitable for use in pharmaceutical manufacturing.
Expand 1 Items
Compression Moulded Closure for Narrow Neck Bottle Series 310
Supplier: Kautex
Compression moulded closure is made from melamine, and features a PE-foam insert.
Expand 1 Items
Accessories for connection system GLS 80
Supplier: DWK Life Sciences
Pressure equalisation set for 4-port, GL 18
Expand 1 Items
Multiple distributors for bottles, BOLA
Supplier: Bohlender
Screw cap and distributor body both made of PP.
Expand 2 Items
Seals for threaded connection caps, BOLA
Supplier: Bohlender
Silicone with PTFE washers.