Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Nalgene™ Screw Caps
Supplier: Thermo Fisher Scientific
PP, coloured.
Expand 52 Items
Seals for threaded connection caps, double sided, BOLA
Supplier: Bohlender
Silicone ring with double-sided PTFE washer. After assembly, the product is only exposed to PTFE.
Expand 7 Items
Filling and venting closures, Nalgene®
Supplier: Thermo Fisher Scientific
PP, white with TPE seals and TPE caps.
Expand 3 Items
Screw caps for laboratory bottles, DURAN®
Supplier: DWK Life Sciences
PBT, red, with PTFE coated seals.
Expand 5 Items
Multiple distributors for bottles with GL 45 thread, BOLA
Supplier: Bohlender
PPS screw cap, black, distributor body made from PTFE.
Expand 5 Items
b.safe Cap GL 45 UHPLC
Supplier: Bohlender
Screw cap made of PPS for GL 45 thread, free movable insert made of PTFE.
Expand 1 Items
Tamper evident closures for PET/PETG square media bottles, HDPE
Supplier: Thermo Fisher Scientific
Closure, tamper evident, specially designed for use with PET/PETG square media bottles.
Expand 1 Items
System waste caps DLC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The additional pre-alert enables the user to provide exchange containers for big volumes of waste e.g. before the end of work or the weekend. Reliable monitoring of the filling levels of waste canisters in laboratory cupboards and workbenches. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 4 Items
b.safe HPLC Eluent Control Caps
Supplier: Bohlender
Screw cap made of PP-GF or PTFE screw-on piece for various barrel threads, with a freely rotating PTFE insert. Integrated is a measuring lance equipped with a capacitive sensor, fully encapsulated in PTFE, with a permanently attached cable (approximately 0,5 m) for connection to a b.safe Mini-Display Table R659-01 (not included).
Expand 3 Items
Screw Cap GL 40
Supplier: BERLIN PACKAGING RIXIUS GMBH
Screw cap made of black PP with ALU laminated PE foam insert for thread GL 40.
Expand 2 Items
Spouts for jerricans
Supplier: S.C.A.T.
For simple and safe pouring of fluids from containers.
Expand 6 Items
b.safe Waste cap electronic fill-level control
Supplier: Bohlender
To prevent your waste canister from overflowing, connect these b.safe waste caps with electronic fill-level control to the alarm box. When the 'canister full' level is reached, you will receive an optical and acoustic warning. The alarm is triggered before your canister is completely full. This leaves a small safety buffer in the canister.
Expand 12 Items
Elbow fitting system waste cap, b.safe
Supplier: Bohlender
Screw cap for thread GL 25 made of PPS with rotary elbow fitting with male thread GL 25 and drip edge at female thread GL 25.
Expand 1 Items
b.safe Starter Sets Premium
Supplier: Bohlender
HPLC-Sets for solvent supply of one HPLC.
Expand 3 Items
Biotainer® Replacement Screw Caps for Bottles, InVitro™
Supplier: Thermo Fisher Scientific
Protect the contents in your Thermo Scientific™ Biotainer™ bottles and carboys. Thermo Scientific™ Nalgene™ sterile polypropylene biotainer replacement closures are for 1, 2, 5, 10 and 20 L polycarbonate biotainers.