Closures
Whether protecting the sample from outside contamination or the workplace from the bottled toxic waste, closures guarantee tight and reliable seals. With a vast cap selection for best compatibility with any container, tailoring to specific contents is possible. Temperature resistant models allow any procedure to be completed safely. Available in different finishes, any sensitive chromatography sample is protected. The caps are easy to close with one hand and come in many colors to assist with identification.
Spouts, b.safe
Supplier: Bohlender
Screw cap for canister thread, freely turnable spout tube, rigid or flexible design with integrated safety aeration for constant flow.
Expand 7 Items
Screw caps, for premium laboratory bottles, DURAN®
Supplier: DWK Life Sciences
TPCh260, colourless.
Expand 3 Items
Connection system GL 45, DURAN®
Supplier: DWK Life Sciences
Connection system with PP screw cap GL 45 with two or three PTFE ports. Flexible modular system. Typical applications: safe transfer of liquid media within a closed and sterile system (evaporation is reduced).
Expand 2 Items
Safety waste caps and ventilation kit, SymLine®
Supplier: S.C.A.T.
Safety waste caps safely connect pipework to the waste container. The integrated exhaust filter blocks solvent vapours, for the protection of health and the environment.
Expand 12 Items
Safety Waste Caps
Supplier: S.C.A.T.
The SCAT SafetyWasteCaps provide maximum safety for your HPLC liquid disposal. Safely dispose of your liquid laboratory waste without contaminating the ambient air by using SafetyWasteCaps with integrated exhaust air filters. These high-performance filters regulate the air pressure balance and prevent the escape of vapors due to the resulting overpressure in the disposal container. The variety of closures, connections and thread sizes allows optimal adaptation to your HPLC situation. Additional versions with grounding connections, level controls or safety funnels or offer every convenience for safe disposal.
Expand 70 Items
SafetyCaps, V2.0, GL 45, preparative
Supplier: S.C.A.T.
Special version of the SafetyCaps V2.0 for use in the preparative HPLC environment with larger tubing connections and air valves with a higher flow rate.
Expand 8 Items
Dropper tip caps, WHEATON®
Supplier: DWK Life Sciences
Screw cap made of radiation grade polypropylene.
Expand 45 Items
Caps, Versilic®
Supplier: Saint Gobain Life Sciences
Made of translucent silicone. Ideal for protecting piping/tubing or protruding cylindrical components during transport and all operations that require aperture protection. (against knocks, splashes, paint and more).
Expand 6 Items
b.safe Cap GL 45 PFAS Analytic
Supplier: Bohlender
b.safe Cap PFAS Analytic, free from polyhaloolefins, unrestrictedly switable for PFAS analysis.
Expand 1 Items
b.safe HPLC Waste Collector Justrite
Supplier: Bohlender
For collection of HPLC waste in Justrite® Disposal safety cans. Compatible with the standard quick-disconnect couplings in polypropylene and stainless-steel.
Expand 1 Items
Caps for sample tubes, tamper evident
Supplier: Simport Scientific
Caps made of PE feature a long skirt and a super fast thread design allowing them to be removed or sealed with a single turn. Caps are designed with flexible sealing lip which provides leakproof seal.
Expand 7 Items
Corning® Direct Overhead Drive Center Cap Assembly for Corning® Reusable Spinner Flasks, Corning
Supplier: Corning
The 120 mm Center Cap Assembly for Corning® Spinner Flasks is designed for use with direct overhead drive motor.
Expand 2 Items
Multiple distributors for bottles, EX, BOLA
Supplier: Bohlender
Black screw cap, made of conductive PPS-EX, for GL 45 threaded bottles and distributor body made of conductive PTFE-EX.
Expand 2 Items
Septum caps, Nalgene®
Supplier: Thermo Fisher Scientific
HDPE with silicone/PTFE septum.