You searched for: Stirring Tools
Conductors for magnetic stirrer heads, BOLA
Supplier: Bohlender
Conductor made of borosilicate glass with or without ground joint.
Expand 3 Items
Overhead stirrer tools, anchor stirrers
Supplier: BOCHEM
Anchor stirrers made of stainless steel.
Expand 3 Items
Overhead stirrer tools, turbine stirrers
Supplier: BOCHEM
Propeller stirrers made of stainless steel, with ring.
Expand 2 Items
Overhead stirrer tools, propeller, centrifugal and paddle-type impellers
Supplier: Heidolph Instruments GmbH & Co.KG
Made from stainless steel.
Expand 6 Items
Overhead stirrer tools, paddle stirrers
Supplier: BOCHEM
Paddle stirrers made of stainless steel, with three holes.
Expand 6 Items
Slip-on baffle, BOLA
Supplier: Bohlender
PTFE, with PFA support ring. The baffle can be mounted at any position on a temperature probe or a solo stirrer shaft.
Expand 2 Items
Stirrers, propeller, with two paddles
Supplier: BOCHEM
Propeller stirrer made of stainless steel with two fixed paddles.
Expand 3 Items
Stirrers, propeller, with four paddles
Supplier: RSG
Stirring Tools, Stirrer, with propeller and four paddles, without shaft, Stirrer Ø: 50 mm
Expand 1 Items
Overhead stirrer tools, viscosity stirrers, Visco-Jet®
Supplier: BOCHEM
Viscosity stirrers made of stainless steel.
Expand 2 Items
Magnetic stirring bar retrievers, Corning®
Supplier: Corning
The stir bar retriever contains a strong magnet to remove a stir bar from all glass and plastic containers used in the laboratory.
Expand 1 Items
Stirrers, propeller, with four paddles
Supplier: BOCHEM
Propeller stirrer made of stainless steel with four paddles.
Expand 9 Items
Overhead stirrer tools, paddle stirrers
Supplier: BOCHEM
Paddle stirrers made of stainless steel, with six holes.
Expand 6 Items
Overhead Stirrer Tools, Anchor-Type Impellers
Supplier: Heidolph Instruments GmbH & Co.KG
Anchor-type impellers for mixing tasks with high viscosity.
Expand 1 Items
Overhead stirrer tools, impellers, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the impeller completely made of PTFE with three blades bent backwards.
Expand 8 Items
Stirring paddles, polypropylene
Supplier: KARTELL
Blades are made of PP, and are fixed to a PP covered steel rod.
Expand 4 Items
Cimarec™ VARIOMAG® i Telemodul Controller
Supplier: THERMO H + P LABORTECHNIK
Save space with Thermo Scientific™ Cimarec™ i Telemodul controllers, including Micro, Mini, Compact and Maxi stirrers.
Expand 1 Items
Special stirrer bearings, BOLA
Supplier: Bohlender
Stirrer bearings made of PTFE, provides a safe seat in the reactor lid. The stirrer shaft is held by an invisible shaft guide made of borosilicate glass which has an adjustable vacuum sealing.
Expand 2 Items
Stirrer bearings, PTFE
Supplier: Bohlender
These bearings have sealing rings to ensure a perfect seal. A special gasket made of PTFE and a FPM o-ring which is compressed by a GL screw cap ensure the stirrer shaft is sealed.
Expand 11 Items
Stirrers, propeller, with two paddles
Supplier: BOCHEM
Propeller stirrer made of stainless steel with two flexible paddles.
Expand 3 Items
Overhead stirrer tools, double impulse stirrer shafts, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the two paddles arranged crosswise at 90° completely made of PTFE.
Expand 2 Items
Stirrers, propeller, with four paddles
Supplier: BOCHEM
Propeller stirrer made of stainless steel with four vertical paddles.
Expand 6 Items
Mixing system, VISCO JET® for overhead stirrers
Supplier: Heidolph Instruments GmbH & Co.KG
VISCO JET® homogenises low and high viscosity liquids in vessels by creating dynamic flow conditions by means of the so-called cone principle. Turbulent flows are created at the taper end by acceleration, displacement and retardation. These flows advance through the stirred medium and result in the new dynamic mixing motion.
Expand 5 Items
Globe stirrer couplings, BOLA
Supplier: Bohlender
These POM couplings are ideal for balancing misalignment of axes between stirrer and stirrer shaft. Suitable for glass, metal or Bola stirrer shafts. Both models are suitable for rotational speeds of up to 1200 rpm and can be used for both right and left-handed rotation.
Expand 5 Items
Stirrer Bearings, glass
Supplier: Bohlender
Combination of borosilicate glass piece with ground joint, an interior PTFE shaft guide with integrated special gasket and a GL screw cap made
of polyphenylene sulphide.
Expand 7 Items
Cimarec™ i 20C Controller, 100 to 240 V
Supplier: THERMO H + P LABORTECHNIK
Simplify operations with the Thermo Scientific™ Cimarec™ i 20C Controller, a user-friendly, menu-driven microprocessor controller that is included with the Micro, Mini, Compact, Maxi and Telesystems stirrers.
Expand 1 Items
Magnetic stirring bar retriever, PTFE
Supplier: GLASWARENFABRIK KARL HECHT
Magnetic stirring bar retriever, Stirring Tools, Length: 350 mm
Expand 1 Items
Stirrer guides
Supplier: witeg Labortechnik
Stirrer guides are of different types.
Expand 5 Items
Overhead stirrer tools, propeller, diamond, centrifugal and anchor-type impellers
Supplier: witeg Labortechnik
Stirring impeller for high speed-type and high torque-type overhead stirrer.
Expand 9 Items
Stirrer guides with mechanical seal
Supplier: HWS LABORTECHNIK
The HWS stirrer guide with ceramic mechanical seal and encapsuled ball bearing in stainless steel to ensure safe working under difficult application. HWS ceramic mechanical seal is applicable for various stirrer materials like glass, stainlesssteel, hastelloy, and more its particular advantage is in combination with coated stirrers (PFA,PTFE, and more) because the static seal prevents damage to the shaft during operation.
Expand 1 Items
Flexible coupling for stirrers
Supplier: witeg Labortechnik
This flexible coupling fix between motor and stirrer shaft.