Vacuum Traps
Placing vacuum traps between an apparatus and vacuum source establishes a safe and controlled working system. The glassware protects the pump from the separated solvents while simultaneously preventing vapors from being emitted back into the system. Vacuum traps in reservoir, one piece, or two piece styles also guarantee that personnel will not be exposed to gases produced that could be harmful. Standard sized inlet and outlet stems can snugly fit regular stoppers.
ESA holder, single use
Supplier: KIMA SAS DI CHIARIN RENZO
ESA 1 single use holder, PP
Expand 2 Items
Replacement chemical traps and parts
Supplier: Restek
These replacement chemical traps and parts for Agilent GC are easy to install, attach to same fittings as original manufacturer's equipment.
Expand 5 Items
Particle traps for use with PLOT columns
Supplier: VARIAN
Though highly stabilised, it is impossible to guarantee that no particles will dislodge from the column wall. When used in valve-switching applications, the use of a particle trap can prevent scarring of the rotors.
Expand 6 Items
Vacuum trap assembly, A584
Supplier: VARIAN
This vacuum trap eliminates the possibility of drawing fluids into the vacuum pump that may be detrimental to it.
Expand 1 Items
Cold Trap Bath, WCT-40
Supplier: witeg Labortechnik
Ideal for collecting evaporation vapor or hazardous vapor from vacuum line.
Expand 1 Items
Inlet traps for rotary vane pumps
Supplier: EDWARDS HIGH VACUUM METTLER
Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.
Expand 4 Items
Cold Trap for Evaporation Tasks, CT50 Single OLÉ
Supplier: HUBER
The CT50 Single OLÉ cold trap means that evaporation tasks in the laboratory are now even easier and cheaper. It has been specially developed to offer highly efficient solvent recovery in laboratory conditions.
Expand 1 Items
Cold trap, Quickfit®
Supplier: SciLabware
Designed for the vacuum systems which prevents the vapours from the volatile materials from damaging pumps and easy to use.
Expand 1 Items
Cold traps, with olives, UT core
Supplier: NEUBERT VOLUME GLASSWAERE
The cooling traps are made from borosilicate glass 3.3, with core at the bottom, two 10 mm glass poles and ground clamp made of PE.
Expand 3 Items
Cooling traps
Supplier: NEUBERT VOLUME GLASSWAERE
Cooling trap, 250 ml, celanex (red), with cap, side connections GL14 with cap and PE-olive
Expand 1 Items
Cold traps, with olives
Supplier: NEUBERT VOLUME GLASSWAERE
This cooling traps are made from borosilicate glass 3.3, with sleeve on the lower part, two 10 mm glass poles and ground clamp made of PP.