You searched for: Lubricants

Supplier: VWR Chemicals

VWR® TECHNICAL Vacuum oil for pump

Supplier: Hettich

Lubricating grease for rotor trunnions

Supplier: VWR Chemicals

VWR® Chemicals silicone grease is a valve lubricant and sealant, often times used as a vacuum grease. It has good resistance to most chemicals, a wide service temperature range, low vapor pressure, low volatility and exceptional water resistance.

Supplier: Brady

Non-greasing maintenance spray for lock cylinders, office machines, tools, car locks.

Supplier: Thermo Fisher Scientific

High-vacuum grease is used as an anti-seize grease in ground glass joints and to lubricate synthetic and silicone rubber gaskets. Also used to lubricate water-treating equipment, laboratory equipment, lubricate O-rings on binoculars and telescopes and to prevent fogging of delicate lenses.

Supplier: Bohlender

Release and anti-blocking agent as well as lubricant for laboratory. Excellent gliding and separating effects.

Supplier: Thermo Fisher Scientific

Synthetic grease for joints.

Supplier: IKA

These certified standard silicone oils can be used to check the measurement accuracy of ROTAVISC.

Supplier: PanReac AppliChem

It is a purified mixture of semisolid saturated hydrocarbons having the general formula CnH2n+2 and is obtained from petroleum.

Supplier: M I MATERIALS

These Apiezon greases are hydrocarbon based, silicone-free and highly resistant to creep, the undesirable phenomenon associated with silicone-based products.

Supplier: Welch by Gardner Denver

Use Labovac pump oils with Welch pumps to reduce oil change cycles and maximise performance. This warranty is only effective when using Welch qualified vacuum pump oils.

Supplier: Welch by Gardner Denver

This double distilled synthetic hydrocarbon oil designed for excellent resistance when pumping corrosive gases or vapors. A synthetic base stock that has no aromatic compounds or sulfur which accelerate varnishing, sludging and carbon build-up when pumps are used to pump corrosives.

Supplier: M I MATERIALS

Medium temperature vacuum grease. Silicone-free. Used when a grease of higher melting point is required.

Supplier: M I MATERIALS

Apiezon N Grease exhibits extremely low vapour pressures at ambient temperatures, 6×10^-10 torr at 20 °C, which are further improved by reductions in temperature to the cryogenic region.

Supplier: Welch by Gardner Denver

A specially fractionated oil for DuoSeal® belt-driven pumps is designed to ensure the highest vacuum performance. The oil is tested to high vacuum levels to meet rigid requirements for vapor pressure, vacuum level stability, and viscosity. DuoSeal® oil is famous for its quality and consistency.

Supplier: M I MATERIALS

Used to seal joints and gaps and to effect temporary repairs. Good for sealing flat unground joints. Can be moulded by hand as it is a putty-like substance. For use at ambient temperatures.

Supplier: VACUUBRAND

Rotary vane pump oil, B
Rotary vane pump oil, B has excellent viscosity characteristics and low vapour pressure. Its exceptional chemical resistance, more stable behaviour when pumping oxidants, acid and alkaline vapours, and the fact that it is better tolerated on contact with skin, sets this oil apart from conventional mineral oils. Even after continuous operation for several weeks and months, the oil ensures the pressure is maintained constantly. Used for priming all RE/RZ series pumps.

Supplier: PerkinElmer

Oil for leybold roughing pump

Supplier: DOW CORNING

Lubrication for control and pressure plug valves, water softener and faucet valves. Sealant for vacuum and pressure systems and outdoor equipment (also shipboard) subject to washing and harsh environmental exposure, such as meters, electrical service entrance and underground connections.

Supplier: DOW CORNING

This silicone-based clear translucent grey coloured compound is used as sealant and lubricant for vacuum systems.

Supplier: DOW CORNING

Molykote® High-Vacuum grease features a stiff, non-melting silicone formula that helps to seal and lubricate chemical processing equipment. Suitable for use in a wide range of applications including sealing vacuum and pressure systems, it is also doubles as a lubricant for o-rings in binoculars and telescopes as it prevents fogging of delicate lenses.

Supplier: PerkinElmer

Vacuum pump oil, Edwards 45

Supplier: Agilent

This coolant is equivalent to the PerkinElmer ICP-MS version.

Supplier: Restek

Inland 45 pump oil is recommended for most mass spectrometers. It has low vapor pressure,10⁻⁷ torr and optimum vacuum pump performance.

Supplier: Restek

This rough pump oil ideal for MSD and oil vacuum pumps is formulated from crude oil stocks known for their durability and line-lubricating qualities.

Supplier: EDWARDS HIGH VACUUM METTLER

ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Supplier: EDWARDS HIGH VACUUM METTLER

A range of Apiezon® greases is offered for use on high vacuum systems and for many general applications in the laboratory. These high purity greases are non-toxic, are easy to apply and clean off and have long shelf lives.

Supplier: EDWARDS HIGH VACUUM METTLER

Fomblin® perfluoropolyether oil for use in oil sealed rotary vacuum pumps and are practically a direct replacement for mineral oil in terms of viscosity and vapour pressure. Also it contains Drynert fluid which contains anti-rust and anti-wear additives soluble in Fomblin®. These additives cover metallic surfaces with a protective, corrosion resistant film.

Supplier: Borer Chemie

Silicone-free laboratory grease for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metall. Withstands vacuum conditions.

Supplier: Borer Chemie

Silicone-free laboratory grease for sealing and lubricating fixed and rotary ground glass joints and for greasing fittings made of plastics and metall. Withstands high-vacuum conditions.