You searched for: Chromatography Supplies

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Bohlender

For easy bundling and fixing of signal cables, grounding cables, waste tubes, and vent tubes inside of safety cabinets and built-in installations.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: S.C.A.T.

The HPLC waste-sets, V2.0 are economical combinations for clean and safe disposal of liquid laboratory waste by HPLC systems or other analytical instruments. All sets consist of a canister and an original SCAT SafetyCap with exhaust filter as well as fittings, blind plugs and a tube connector.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: S.C.A.T.

These safety funnels and containers are used all over the world wherever the safe disposal of liquid waste is important. To ensure that collection points are also quickly ready for use, the most popular products have been assembled as sets. This requires only one part number for the comprehensive safety system, guaranteed compatible without time-consuming assembly of individual components.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: Trajan Scientific and Medical

Deactivated liners for ATAS optic injectors.

Supplier: Bohlender

Complete set for equipping one HPLC system.

Supplier: Trajan Scientific and Medical

Injection loop, PEEKsil™, 10 µl, 0,22 mm I.Ø, length 260 mm, for Rheodyne® and Valco® valves

Supplier: HAMILTON BONADUZ

The Neuros™ adapter kit attaches to any 5,0 to 100 µl removable needle (RN) syringe.

Supplier: Bohlender

Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.

Supplier: Trajan Scientific and Medical

Autosampler syringes for HP7673, 7683, 7693A and 6850ALS.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Trajan Scientific and Medical

SGE OptChem™ GC inlet liner provide optimal performance with advanced coating technologies in an easy to use format for GC and GCMS.

Supplier: IDEX RHEODYNE

Stators are available in 316 stainless steel, PEEK and proprietary materials. Rheodyne® stator materials have been researched and selected for their physical and mechanical strengths. Stators only need replacing if the ports or sealing surfaces become damaged.

Supplier: Thermo Fisher Scientific

Solid Phase Micro Extraction (SPME) uses a thin-fused silica fiber coated with a sorbent which enables extraction of compounds of interest from liquid or gaseous samples through absorption or adsorption. The fiber is then moved to the injector and the compounds thermally desorbed. The SPME consumables come in two formats SPME fibers and SPME arrows.

Supplier: IDEX RHEODYNE

The Rapid Replacement Pod™ (removable liquid-end) design of the TitanHP™ and TitanHT™ platforms make it easy to replace valve's wear components. The entire Pod™ can be purchased separately and replaced as a unit with nearly no instrument downtime for repair. The Pods™ can then be rebuilt at a later time with genuine Rheodyne® RheBuild® kits.

Supplier: Thermo Fisher Scientific

These liners provide enhanced inertness, leading to increased accuracy, sensitivity, and precision in your gas chromatography (GC) analysis.

Supplier: Thermo Fisher Scientific

Ferrule, transfer line, graphite/vespel

Supplier: IDEX RHEODYNE

Sample loop, for model 7725, 7725I, PR/EV 700-100, PR/EV 703-100, Stainless steel, 5 µl, For tube I-Ø: 0,18 mm, For tube O-Ø: 1,5 mm

Supplier: Thermo Fisher Scientific

LinerGOLD™ GC liners provide exceptional inertness, leading to increased accuracy and precision by preventing loss of sensitive compounds.

Supplier: Thermo Fisher Scientific

ESI-MS accessories are used to facilitate reproducible, low dispersion connections between μPAC HPLC columns and low-flow mass spectrometer ion sources.

Supplier: Thermo Fisher Scientific

Optimise the performance of Agilent™ GC systems with these specifically designed injection port liners for Agilent instruments.

Supplier: IDEX RHEODYNE

RheBuild® kits containing genuine Rheodyne® parts are available for most Rheodyne® products

Supplier: Thermo Fisher Scientific

This SilFlow 3-port device allows column switching in GC-MS without the need to vent.