You searched for: Chromatography Supplies

Supplier: VWR Collection

ChromasterUltra Rs, ChromasterUltra Rs plunger for 6170 binary pump

Supplier: VWR Collection

Chromaster, Chromaster Plus HPLC interface control board for Chromaster Plus system control. USB cable and e-line cable (0,5 m) included, built into the autosampler upon installation in laboratory, if no autosampler is used, then the interface box (S) must be ordered instead

Supplier: Avantor

J.T.Baker®, Adapter, blue, for attaching reservoir or Luer tip to PP SPE columns

Supplier: S.C.A.T.

The HPLC Supply Sets, V2.0 of the premium manufacturer SCAT are attractively priced combinations of equipment for contamination-free supply of HPLC systems with solvents. The sets each consist of a laboratory bottle with GL 45 thread, a SCAT SafetyCap as well as matching capillaries, suction filters and air valves.

Supplier: S.C.A.T.

SCAT lab installations can be completely integrated into lab furniture and offer a gastight system for safe fluid management.

Supplier: VWR Collection

These spare parts are suitable for certain HPLC pumps.

Supplier: VWR Collection

Syringe tip, 175 µl

Supplier: VWR Collection

Maintenance parts kit for Chromaster HPLC 5110 pumps. Kit contains 2× pump seal 655-1080, 4× packing (A) 810-1345, 1× packing 638-1422, 1× filter 638-1423, 1× packing 638-1424, 2× wash seal 885-1884, 1× drain valve seal 885-2920, 1× packing 885-1505, 2× packing (B) 891-1364

Supplier: VWR Collection

This spare part is suitable for Chromaster 5210 and 5260 autosamplers. For Chromaster 5210 AS from Serial No. 1309-001 and 1309T-001 onward. For Chromaster 5260 AS from Serial No. 1205-001 and 1205T-001 onward.

Supplier: S.C.A.T.

The ready-to-use automatic switching sets prevent the overflowing of disposal containers and the associated leakage of hazardous, toxic, or explosive liquid waste.

Supplier: S.C.A.T.

The HPLC Supply and Waste Disposal Set V2.0 is the ultimate and universal set of all required components for solvent supply and waste of all HPLC/UHPLC systems.

Supplier: Trajan Scientific and Medical

Autosampler syringes for AOC14, AOC17 and AOC20.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Bohlender

For easy bundling and fixing of signal cables, grounding cables, waste tubes, and vent tubes inside of safety cabinets and built-in installations.

Supplier: Bohlender

HPLC sets for solvent supply containing b.safe caps GL 45 for four bottles, PFA-fittings for capillaries with Ext.Ø. 3,2 mm, blind fittings made of PFA to close unused connections as well as air valves with service life indicator.

Supplier: S.C.A.T.

The HPLC waste-sets, V2.0 are economical combinations for clean and safe disposal of liquid laboratory waste by HPLC systems or other analytical instruments. All sets consist of a canister and an original SCAT SafetyCap with exhaust filter as well as fittings, blind plugs and a tube connector.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: S.C.A.T.

These safety funnels and containers are used all over the world wherever the safe disposal of liquid waste is important. To ensure that collection points are also quickly ready for use, the most popular products have been assembled as sets. This requires only one part number for the comprehensive safety system, guaranteed compatible without time-consuming assembly of individual components.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner. Choosing the right inlet liner and injection parameters can increase peak areas and reduce detection limits by up to 300%.

Supplier: Bohlender

Set consisting of (1) base plate with female thread M8, (1) threaded rod M8, length 200 mm, (1) pipe clamp with female thread M8 for tube ext.Ø 32 mm, and fastening material for assembly on walls or under desktops.

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: Trajan Scientific and Medical

The SGE inlet liner range aims to make it simple for all gas chromatographers to select the correct liner.

Supplier: Bohlender

Complete set for equipping one HPLC system.

Supplier: Trajan Scientific and Medical

Deactivated liners for DANI GCs.

Supplier: HAMILTON BONADUZ

The Neuros™ adapter kit attaches to any 5,0 to 100 µl removable needle (RN) syringe.

Supplier: Trajan Scientific and Medical

Injection loop, PEEKsil™, 10 µl, 0,22 mm I.Ø, length 260 mm, for Rheodyne® and Valco® valves