You searched for: Membrane Filters

Supplier: Sartorius

Regenerated cellulose hydrophilic membrane filters. For filtration of organic solvents. Suitable for particle removal from aqueous solutions and solvents. Low adsorption.

Supplier: Sartorius

These membrane filters have high hydrophilicity and exceptionally low non-specific binding characteristics. These membranes are ideal for sample cleaning and protein removal and when high recovery of the filtrate solution is of primary importance.

Supplier: Whatman products (Cytiva)

Nuclepore™ track-etched hydrophilic membrane filters offer a highly defined pore size cut-off in the submicron range, enabling particle deformity measurement and capture of extremely small particles. The membranes have sharply defined pores, high flow rates, and excellent chemical and thermal resistance. They are suitable for a variety of samples and applications, including microscopy, cytology, parasitology, and certain air and oceanography analyses.

Supplier: Cytiva (Formerly Pall Lab)

Strong, chemically resistant membranes for air monitoring and sampling in aggressive environments.

Supplier: Merck

These PC hydrophilic membrane are track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. They are composed of polycarbonate film, which has a smooth, glass like surface for clearer sample observation.

Supplier: Cytiva (Formerly Pall Lab)

These membranes have been designed specifically for use with the Sentino® automatic filter dispenser.

Supplier: Merck

S-Pak™ hydrophilic sterile membranes are protected with a blue sheet of paper that keeps the membrane encountering with the film by ensuring maximum productivity and efficiency. This protective sheet prevents the migration of any adhesive.

Supplier: Merck

Durapore® membranes provide high flow rates and throughput, low extractables and broad chemical compatibility.

Supplier: Cytiva (Formerly Pall Lab)

Inherently low ash membrane ideally suited for multiple NIOSH analytical methods.

Supplier: Sartorius

Membrane filter, Membrane: Cellulose acetate, Non sterile, Type: 123, Pore size: 1,20 µm, Ø: 25 mm, Thickness: 140 µm

Supplier: Merck

Mitex™ PTFE hydrophobic membranes are unaffected by almost all liquids, including organic solvents, concentrated acids and bases, propellants, and cryogenic fluids. They are unbacked, but easy to handle, combining the convenience of a backed membrane with the versatility of a pure PTFE membrane.

Supplier: Merck

Membrane filter, Optex™, Sterile, Pore size: 0,22 μm, Ø: 25 mm

Supplier: Merck

Ultrafiltration cut disc membranes are available in Ultracel® regenerated cellulose and Biomax® polyethersulvone (PES).

Supplier: Sartorius

Hydrophobic cellulose nitrate and cellulose acetate gridded membrane filters for colony count and sterility testing, with outstanding retention rates for microorganisms.

Supplier: Merck

Strat-M membrane for transdermal diffusion testing, experience the unmatched predictability of Strat-M membrane - a synthetic, non-animal based model for transdermal diffusion testing that is predictive of diffusion in human skin without lot-to-lot variability, safety and storage limitations.

Supplier: Cytiva (Formerly Pall Lab)

Contrasting hydrophilic modified black PES membrane for microbiological analysis.

Supplier: Merck

Reinforced prefilter membranes can be used to remove contaminants from a variety of liquids and gases.

Supplier: Sartorius

Cellulose acetate hydrophilic membrane filters. Ideal for biological and clinical analysis, sterility tests and scintillation measurements. Very low protein binding capacity, suitable for aqueous, alcoholic media and hot gases.

Supplier: Merck

Our Fluoropore® membrane is a hydrophobic, polytetrafluoroethylene (PTFE) polymer membrane bonded to a high density polyethylene support to improve the handling characteristics of the filter for normal applications. Fluoropore membranes provide broad chemical compatibility, high flow rates and consistency. (Please note that catalogue numbers containing 'FHUP' are unlaminated, or produced without a backing.) Our Omnipore membrane is a hydrophilic PTFE membrane that is compatible with virually all solvents, acids, and alkaline solutions.

Supplier: Merck

These white Fluoropore™ membrane are hydrophobic, PTFE polymer membrane bonded to a high density PE support and provide broad chemical compatibility, high flow rates and consistency.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Merck

These PTFE white hydrophilic membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractables, to provide clearer analysis results. They are widely used for HPLC mobile phase filtration, clarifying acids, bases and dilute protein solutions and isolation of RNA.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Spectrum Laboratories

These woven filters are constructed of individual strands woven into a mesh screen, characterised by precise mesh openings, percent open area and mesh thickness. Available in five material types with different physical, chemical and thermal characteristics to select from depending on your application. Available in discs or square sheets.

Supplier: Merck

These white Omnipore™ membranes are hydrophilic, PTFE compatible with virually all solvents, acids and alkaline solutions. They can be used for filtration of aqueous solutions, clarifying acids and alkaline solution.

Supplier: Sartorius

PES membrane filters are hydrophilic, have high flow rates thanks to the symmetric structure, have a low non-specific protein adsorption and are chemically resistant over a pH range of 1 to 14. They are recommended for the filtration of aqueous solutions as well for the protein filtration. Furthermore, the low level of extractables makes them suitable for environmental analysis.

Supplier: Merck

These membranes manufactured from mixed esters of cellulose are suitable for testing drinking, bottled and mineral water according to international standards.

Supplier: Merck

ZHE (Zero Head Space Extractor) hazardous waste filtration system, which is approved by the US Environmental Protection Agency (EPA) as an apparatus for Toxicity Characteristic Leaching Procedure (TCLP) measurement. The system cannot pressurise unless completely assembled; this eliminates accidentally 'shooting the piston' out of the unit and assures safe operation. Choose both manual and automatic venting modes.

Supplier: Cytiva (Formerly Pall Lab)

Certified hydrophilic mixed cellulose esters membrane for microbiological analysis meets or surpasses regulatory specifications.

Supplier: Merck

Durapore® PVDF white membranes provide high flow rates and throughput, low extractables and broad chemical compatibility. Hydrophlic membrane binds far less protein than nylon, nitrocellulose, or PTFE membranes.