Supplier: UPCHURCH SCIENTIFIC

These standard size wrenches can be used to tighten most nuts into unions.

Supplier: UPCHURCH SCIENTIFIC

PEEK polymer adapters connect peristaltic tubing to standard rigid or semi-rigid tubing.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, Maintenance kit to replace a worn or damaged cutting wheel

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific®, P-1087x, replacement washer, stainless steel, M6 flat bottom port, for 1/8" OD tubing, Stainless steel

Supplier: UPCHURCH SCIENTIFIC

NanoPort™ assemblies provide consistent fluid connections for chip-based analyses, connections will bond to a variety of substrate materials with the use of Loctite™.

Supplier: UPCHURCH SCIENTIFIC

These tools made from aluminium or Delrin® can be used to tighten most knurled nuts in hard to reach places. For precise tightening, the extender tools listed with ¼" hex drives are designed to adapt to any torque wrench with a female ¼" socket.

Supplier: UPCHURCH SCIENTIFIC

Back pressure regulator assemblies are designed to create incremental back pressures ranging from 5 to 1000 psi (0,3 to 69 bar). These biocompatible and stainless steel back pressure regulator assemblies are available complete with a replaceable, factory pre-set cartridge (except the 5 and 20 psi (0,3 to 1,4 bar versions).

Supplier: UPCHURCH SCIENTIFIC

Tefzel® (ETFE), natural.

Supplier: UPCHURCH SCIENTIFIC

PEEK, natural or coloured.

Supplier: UPCHURCH SCIENTIFIC

PEEKsil capillary.

Supplier: UPCHURCH SCIENTIFIC

Thes filters with stems are 100% 316 stainless steel. Filters with threaded fittings have threaded Kel-F® (PCTFE) caps.

Supplier: UPCHURCH SCIENTIFIC

VacuTight™ fittings provides airtight, dependable connections under vacuum and low pressure conditions. These nuts have streamlined profiles for use in systems requiring a large number of connections in a small area, the ferrules are small size ensures sufficient nut/thread engagement, even in shallow ports. Ideal for combichem, high throughput screening, clinical diagnostic and other automated liquid handling applications.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Specifically designed for Ismatec® pump tubings.

Supplier: UPCHURCH SCIENTIFIC

The 6-port medium pressure injection valves feature easy, external sample loop customisation. Simply clean-cut a piece of tubing that represents the volume of sample you wish to inject, taking into account the port-to-port volume of the valve.

Supplier: UPCHURCH SCIENTIFIC

PEEK.

Supplier: UPCHURCH SCIENTIFIC

Precolumn filters, PEEK bodies and PCTFE-surrounded PEEK frits.

Supplier: UPCHURCH SCIENTIFIC

These biocompatible PEEK and perfluoroelastomer inline check valves are designed for applications where low flow path volume is critical, such as delivery to lab-on-a-chip, single-cell analysis and micro- or nano-LC post-column derivatisation.

Supplier: UPCHURCH SCIENTIFIC

These high quality stainless steel sample loops have burr-free, square-cut ends to ensure a flush connection to valve ports.

Supplier: UPCHURCH SCIENTIFIC

These are made up of PEEK™ polymer and stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Stainless steel and PEEK.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: UPCHURCH SCIENTIFIC

Inline cartridge check valves are designed to limit flow in one direction and deliver a low cracking pressure. Ideal placement for these valves would be on the effluent side of the column to prevent post-column derivatisation agents from flowing back and poisoning the column if the HPLC mobile phase pump were to shut down.

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: UPCHURCH SCIENTIFIC

Low pressure inline filters offer excellent protection for any low pressure application.

Supplier: UPCHURCH SCIENTIFIC

Designed to cut capillary-sized polymer tubing.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Designed for plumbing tubing through equipment housing. Each union has unique ³/₈-24 external threads and comes complete with a stainless steel nut and lock washer to hold it in place.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.