47009 Results for: "Self-Tightening Column Nuts for GC"

Supplier: Agilent

CrossLab, Column nut, no slot, 6-sided

Supplier: VARIAN

Column connecting nuts, 1/16 in. tube

Supplier: Trajan Scientific and Medical

Autosampler syringes for PerkinElmer AutoSystem.

Supplier: Agilent

CrossLab, Column nut, for injector 1093, Stainless steel

Supplier: PerkinElmer

Connector nuts, plugs and unions for GC instrumentation.

Supplier: PerkinElmer

Replacement column nut, 1/16", connects capillary column to adapter

Supplier: Thermo Fisher Scientific

This SilFlow 3-port device allows column switching in GC-MS without the need to vent.

Supplier: Restek

This direct injection liner adapter uses standard 1,59 mm capillary nut and ferrules. Can be used with Agilent or Restek direct injection glass inserts or Restek direct injection uniliner liners for an Agilent 5890 packed column GC.

Supplier: MACHEREY-NAGEL

Accessories for stainless steel columns, PEEK fittings and capillaries.

Supplier: VICI JOUR RESEARCH

For opening and tightening ¹/₄'' nuts.

Supplier: MACHEREY-NAGEL

CC connecting kit, with 2 nuts of end fittings, two sleeves and two guide rings

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: Thermo Fisher Scientific

Metal-to-metal seal eliminates contamination and gives lower air/water background noise. No need to retighten ferrules, as they expand and contract with the fitting over GC operating temperatures.

Supplier: Restek

This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.

Supplier: Restek

This split or splitless inlet adaptor fitting is suitable for capillary columns with internal diameter 0,53 mm. Makes column installation easy due to the nut protruding farther from the insulated injection port chamber.

Supplier: Agilent

Universal column nut, small, 1/16" hex

Supplier: witeg Labortechnik

These borosilicate glass chromatography columns have fused-in sintered glass discs, ST-stopcock, with solid plug and screw-thread retaining nut.

Supplier: Restek

This 316 stainless steel tubings are complete with end-fittings, frits, nuts and ferrules which are preassembled. And the internal 1,6 mm seats are compatible with Valco® and parker fittings.

Supplier: witeg Labortechnik

Chromatography column made of borosilicate glass with fused in sintered glass disc with ST-stopcock at the top with solid plug and screw-thread retaining nut, vacuum connection with drip tip and ST-cone at the bottom.

Supplier: OMNIFIT

EZ SolventPlus™ columns are designed for maximum chemical compatibility. Borosilicate glass and PTFE construction, with Chemraz® o-rings and PTFE frits, only the most inert materials are present in the fluid path. ETFE end caps and fitting nuts ensure a chemically inert connection into and out of the system.

Supplier: UPCHURCH SCIENTIFIC

Reusable fittings made from stainless steel and proprietary PEEK polymer blend. Reusable up to 10 cycles without tubing damage or impact on pressure holding ability or carry-over (5 cycles if tightened to 1,6 N.m). Pressure rating up to 30 000 psi (2070 bar). Required torque 10 in-lbs (1,10 N-m)/14 in-lbs (1,6 N-m).

Supplier: VARIAN

Clean gases reduce the risk of column damage and improve accuracy and sensitivity. These unbreakable and self-indicating filters give high sensitivity to oxygen and moisture and can be installed in seconds without tools.

Supplier: Cytiva

This torque wrench is suitable for assembly and disassembly of BPG columns.

Supplier: Avantor

The female-female connector consists of stainless steel tubing (40 mm×1,588×0,254 mm (L×O.Ø×I.Ø)) with appropriate 1/16" nuts and ferrules and can be used to connect female endfitting guard and analytical columns and make similar connections.

Supplier: Trajan Scientific and Medical

Endura-Seals are the CRS alternative to typical silicone-rubber injection port septa for gas chromatography. They work in a 2 part sealing system that includes the septa and the sealing nut.

Supplier: Trajan Scientific and Medical

Autosampler syringes for HP7673, 7683, 7693A and 6850ALS.

Supplier: Trajan Scientific and Medical

SilFlow™ microchannel device (MCD) options for three-port GC splitters, four-port GC splitters and a Deans' switch MCD, perfect for multi-dimensional analyses. SilFlow™ can be incorporated into the system without impacting the chromatography.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Trajan Scientific and Medical

* Gas-tight.

Supplier: Merck

Pyrrole is used as one of the building blocks of biochemical macrocycles such as chlorins, porphyrins and corrins. It is also used for many technologically relevel applications such as in organometallic complexes and precursor molecules for self-assembled monolayers on metal surfaces.