1174 Results for: "Hanna"

Supplier: Hanna

A variety of cleaning solutions for electrodes.

Supplier: Hanna

For calibration of pH meters.

Supplier: Hanna

Test kit, Chlorine (free), DPD method, Range: 0,00 - 2,50 mg/l

Supplier: Hanna

An extensive range of standard solutions designed to ensure maximum accuracy of conductivity meters and sensors.

Supplier: Hanna

ORP standard solutions allow you to test the precision of ORP electrodes.

Supplier: Hanna

HI 70300L is a storage solution prepared with reagent grade chemicals which can be used to ensure maximum performance of pH and ORP electrodes.

Supplier: Hanna

Solutions in sachets ensure optimum precision. The plastic-coated sachet provides a perfect liquid seal and good protection from light. The solutions should only be used once to avoid any danger of contamination. They also satisfy the requirements of the GLP and ISO standards. They have been adjusted using a pH meter that has been calibrated according to the NIST standards.

Supplier: Hanna

Plastic bottle with a tamper-proof seal.

Supplier: Hanna

pH tester supplied with interchangeable pH combination electrode.

Supplier: Hanna

Easy to use pH testers that float. They have a waterproof casing and provide accurate, economic pH measurements on the spot for a wide variety of applications across many industry types.

Supplier: Hanna

A wide variety of pH electrodes designed for many different applications.

Supplier: Hanna

Waterproof, pocket testers for high accuracy pH, conductivity/TDS and temperature measurements.

Supplier: Hanna

pH Buffer solution, pH value: 1,00, ±0,01, Reference temperature: 25 °C, Plastic bottle

Supplier: Hanna

These instruments measure conductivity, TDS and temperature.

Supplier: Hanna

The HI-93728-01 and HI-93728-03 nitrate reagents are suitable for use with the HI-96728 portable photometer and the HI-83200-02 and HI-83099-02 multiparameter bench photometers.

Supplier: Hanna

The Checkfridge® is a handy and precise thermometer adapted to accurate and reliable temperature monitoring. It allows continuous measurements in cold rooms, freezers and refrigeration units. It is possible to monitor inside temperature without having to open the door.

Supplier: Hanna

Total chlorine liquid reagents are used for the colorimetric determination of total and free chlorine, for use with Hanna’s compatible benchtop and portable photometers.

Supplier: Hanna

The Primo series of portable testers provide a fast and dependable way to measure the total dissolved solids or conductivity in water samples. Users just need to press the button on top of the meter in order to turn it on. It is ready to use immediately.

Supplier: Hanna

This gas sensor is a combination electrode that detects dissolved gases in a solution. Ideal for the determination of carbonates as CO₂ in water, soft drinks and wine samples.

Supplier: Hanna

Cable, Connection cable with BNC and BNC connectors, Length: 1 m

Supplier: Hanna

AA lithium battery, 3,6 V

Supplier: Hanna

High-performance instrument that measures within a wide range of multiple parameters.

Supplier: Hanna

Overhead stirrer assembly (incl. Overhead stirrer and 3 propellers) for HI 900 Series titrators, For: HI 901

Supplier: Hanna

Syringe, medical, Graduated syringe set, For: accurately dosing reagents for CTK and photometers, Capacity: 1 ml, Pk: 6

Supplier: Hanna

Electrode, pH, Edge™, pH electrode HI 11311, with temperature sensor and Sensor Check™, pH: 0 - 13, Glass, Diaphr.: Single ceramic, Electrolyte: KCI 3,5M, easyPlug 3,5 mm, For: Laboratory, general purposes

Supplier: Hanna

This thin, lightweight tablet is designed to measure pH, conductivity (EC/TDS/NaCl/°C) and dissolved oxygen through advanced digital electrodes (only one electrode (parameter) can be connected at any time). The meter is portable and can be placed on a bench or mounted to a wall using the cradle with built-in power connection. The device can also be charged from a car cigarette lighter (adapter is required, not included), allowing even more mobility. When fully charged, the battery runtime is between 10 and 12 H. Standard mode:

Supplier: Hanna

Tool for electrode replacement in meters, for HI 98120, HI 98121, HI 98127, 98128, HI 98129, HI 98130, HI 98311 and HI 98312 testers, For: Hanna Combo HI 98129 / HI 98130

Supplier: Hanna

The HI-7631/2 conductivity/TDS sensor has a ½" thread and is ideal for use with the HI-983304 and HI-983305 Gro'chek and Pronto series. This is an amperometric probe, provided with built-in temperature sensor for automatic compensation, 2 m cable and a PEI (PolyEther-Imide) protective sleeve, which resists most aggressive chemicals.

Supplier: Hanna

These water resistant conductivity or TDS meters are ideal for accurate, affordable process monitoring with low maintenance.

Supplier: Hanna

ORP electrode HI 3230B; range ±2000 mV, 20...40 °C, Plastic, Diaphr.: Ceramic, BNC, 1 m cable