75546 Results for: "Flame Ionization Detector (FID) Supplies"

Supplier: VWR Collection

An ioniser is used to remove static electricity that accumulates in many kinds of samples that are being weighed, like plastic samples (and containers) or films. Using an ioniser the weighing sample is neutralised in seconds.

Supplier: OHAUS

Electrostatic charges on weighing containers and samples can result in false readings or instability as they create attractive and repulsive forces. The ION-100A is designed to be used in conjunction with an OHAUS balance to neutralise electrostatic charges that can lead to inaccuracies.

Supplier: VWR Collection

LaChrom Elite®, High pressure micro flow cell for L-2450/L-2455

Supplier: Agilent

FPD is designed with minimum detectable levels of 3,6 pg/s for sulfur and 60 fg/s for phosphorus.

Supplier: Agilent

Before ordering parts for FID maintenance, determine which type of FID is installed on your GC. The FID is available in two versions: Dedicated, capillary optimized: for capillary columns only. Adaptable: for packed or capillary columns.

Supplier: VWR Collection

These detectors include a number of innovative features including the ability to select the best nebuliser and a unique low temperature technology. The evaporation drift-tube design optimises both resolution and sensitivity. In addition, you can control the system locally or via a PC. A remote shutdown mode is provided to minimise cost and enhance system lifetime.

Supplier: VWR Collection

These ELSD models combine simplicity, reliability and robustness for all your analyses or purifications. They allow for the detection of essentially all compounds. Detection is based on a universal property of all analytes, and does not require the presence of a chromophoric group, electro-active group, etc. Control of the system can be done either locally or via a PC. A remote shutdown mode is also provided to minimise cost and enhance system lifetime.

Supplier: VWR Collection

VWR®, Nebuliser for ELSD 80 LT flash

Supplier: VWR Collection

VWR®, Manual for ELSD 100 low temperature evaporative light scattering detectors

Supplier: VARIAN

Tube collector

Supplier: Agilent

Agilent dual-stage detectors are equivalent to the PerkinElmer ICP-MS versions for complete confidence and are available in original and improved versions.

Supplier: Cytiva

The monitor UVis-920 is a high-precision, multipurpose, standalone UV monitor. Use of different filters allows the monitor to cover wavelengths from 200 to 700 nm, without changing the lamp.

Supplier: PerkinElmer

Pin shoulder

Supplier: VARIAN

The operating supplies set includes two 500 ml constant pressure bottle, a diluent bottle (1 L), a three-way SIPS tee piece assembly for SIPS-20, six SIPS pump tubings, a SIPS kit and ten pack SIPS pump bands.

Supplier: KNAUER

The CDD-10-AVP is a highly sensitive conductivity detector applicable to ion chromatography or organic acid analysis. Low noise, low drift and wide dynamic range assure proven performance of the CDD-10AVP detector. A special features is the VP key for validation.

Supplier: Agilent

Flame photometer

Supplier: TOSOH Bioscience

Post column filter 0,2 µm, 13 mm nylon

Supplier: VARIAN

Flame photometer

Supplier: SHIMADZU

Hex nut screwdriver

Supplier: PerkinElmer

Supplies

Supplier: TOSOH Bioscience

Tosoh’s LenS3™ Multi-Angle Light-Scattering detector combines high-sensitivity MW and Rg determinations with flexibility and ease of use.

Supplier: Agilent

Ion gauge tube, with K-25 flange

Supplier: PerkinElmer

FID jet contact/spring

Supplier: Merck

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.

Supplier: Cytiva

UV flow cell, 10 mm, with optical fiber

Supplier: Merck

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.

Supplier: Merck

SupraSolv® ECD and FID is specially developed for gas chromatography in combination with ECD (Electron Capture Detetor) and FID (Flame Ionization detector). SupraSolv® solvents offer the largest specified retention time range, a clear baseline and a minimal signal-to-noise ratio leading to reliable and reproducible analysis results.

Supplier: Agilent

In 2005, Agilent released an improved FPD with minimum detectable levels (MDL) of 3,6 pg/s for sulphur and 60 fg/s for phosphorus. This is more than a five times improvement for sulphur.

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Single channel flame photometer for analysis of five elements (sodium, potassium, lithium, calcium, barium) designed with front loading, unobstructed sample work area and removable tray for easy cleaning.

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Accessories for flame photometers, For: Flame photometer, model 420 and model 425, Potassium filter