"Bohlender"

Supplier: Bohlender

Integrate b.safe system caps and b.safe funnels in laboratory hoods or working tables. Liquid solvent waste can be lead directly into canisters via b.safe waste pipes.

Supplier: Bohlender

Made of PE, to reduce the bore diameter in table- or countertops from approx. 54 to 30 mm to ensure a safe installation of e.g. b.safe Desktop Mounts or b.safe Multiports in corresponding bores. Consisting of top part, lock washer and silicone gasket to avoid rotating and slipping during installation.

Supplier: Bohlender

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Supplier: Bohlender

Culture bottles, made of borosilicate glass, suitable for both low and high speed (maximum 1000 rpm) stirrers for gentle mixing of cell cultures.

Supplier: Bohlender

Black screw cap, made of conductive PPS-EX, for GL 45 threaded bottles and distributor body made of conductive PTFE-EX.

Supplier: Bohlender

Used for temperature measurement in aggressive liquids and ideal for built-in measurement cables.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the fan shaped stirring unit completely made of PTFE.

Supplier: Bohlender

Stirrer blades made of PTFE, with one sided groove and 10 mm bore diameter.

Supplier: Bohlender

PTFE compound, glass shaft. These gastight stirrer heads are ideal for PTFE-jacketed stirrer shafts from BOLA and are also suitable for shortened stirrer shafts. Suitable for high speeds of up to 1500 min⁻¹.

Supplier: Bohlender

Stirrer shafts made of PTFE-jacketed stainless steel and the propeller completely made of PTFE.

Supplier: Bohlender

Sampling pump is made up of PP and PTFE.

Supplier: Bohlender

Total immersion PTFE probe (class A, PRT 100), with white PTFE-coated cable.

Supplier: Bohlender

Aluminum frame with panels made of conductive polycarbonate. Base made of conductive polyethylene. Front panel with four access openings and two pairs of size 9,75 gloves made of conductive EPDM, three cable entry points on the rear (right/center/top left). Two airlocks (right and left) each with two doors, outer doors with latches to prevent accidental opening. When the door is opened, a tray extends into the work area for easy removal of inserted products. The work area and airlocks each include two hose connections for gassing and ventilation, as well as suitable hoses (3×5 m gassing hoses made of PVC and 3×5 m ventilation hoses made of PE). All materials used are capable of dissipating electrostatic charges via a grounding cable that can be connected to the rear (M6 connection thread).

Supplier: Bohlender

Flexible corrugated tubing with 1× thread connection GL 14 to screw in the exhaust filter connection of a b.safe Waste Cap and 1× plug connection with ribs for connection to the exhaust system with a bore Ø 14 mm.

Supplier: Bohlender

T-shaped connector made of static dissipative PE-EX.

Supplier: Bohlender

Upper side of the screw caps is made of PTFE and lower side is made of silicone-elastomer for balancing unevennesses on sealing surfaces.