You searched for: Microscopy and staining reagents

Supplier: SIGMA ALDRICH MICROSCOPY

Immersion oil is used for high resolution (1000X) light microscopy work under oil immersion objective lens.

Supplier: Merck

Used to increase lens effectiveness

Supplier: SIGMA ALDRICH MICROSCOPY

To be used with SIAL 69571 Ren HY 956 (Hardener for Epoxy Embedding Medium)

Supplier: SIGMA ALDRICH MICROSCOPY

Immersion oil has been used in epifluorescent microscopy and cell identification.

Supplier: Merck

Aquatex is used for e.g. LEUCOGNOST stained specimens. For preservation purposes and subsequent optimal microscopy, the stained sections are normally mounted using a suitable mounting agent and covered with a cover glass.

Supplier: SIGMA ALDRICH MICROSCOPY

to be used with SIAL 78711 RenLam M-1 (Epoxy Embedding Medium)

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoromount™ Aqueous Mounting Medium for use with fluorescent dye-stained tissue.

Supplier: SIGMA ALDRICH MICROSCOPY

D.P.X mounting medium is a mixture of distyrene (polystyrene), a plasticizer (tricresyl phosphate), and xylene. It facilitates the protection of stains and can dry quickly.

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ with 1,4-Diazabicyclo[2.2.2]octane is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: SIGMA ALDRICH MICROSCOPY

DPX Mountant for histology has been used as a slide mountant to fix sections.

Supplier: SIGMA ALDRICH MICROSCOPY

For use with Osteo-bed bone embedding kit. Solvent for removal of plastic from sections prior to rehydration and staining. Most histochemical and immunohistochemistry staining protocols require the removal of methyl methacrylate (MMA) and rehydration of mounted sections for improved stain penetration and greater contrast.

Supplier: SIGMA ALDRICH MICROSCOPY

Epoxy embedding medium is generally used for biological tissues during study by electron microscopy. Usually, it consists of three components; Epon 812 resin, an anhydride hardener and an accelerator

Supplier: SIGMA ALDRICH MICROSCOPY

ImmunoHistoMount™ is a permanent aqueous mounting medium designed for tissue sections and cell smears with peroxidase and alkaline phosphatase chromogens that cannot be dehydrated with organic solvents.

Supplier: SIGMA ALDRICH MICROSCOPY

Bouin's solution is an excellent fixative for preserving soft and delicate structures. It is prepared with saturated picric acid, formaldehyde and acetic acid.

Supplier: SIGMA ALDRICH MICROSCOPY

HistoChoice® is a patented, complex mixture of agents that allow tissues to retain their structure, antigenic sites and nucleic acid sites. This formulation in non-citrus, contains no mercury, formaldehyde or glutaraldehyde.

Supplier: SIGMA ALDRICH MICROSCOPY

Differentiation solution comprises acidified ethanol or isopropanol that is used to decolourise hematoxylin stain. The duration of exposure to the solution determines the degree of decolourisation. Differentiation is a crucial step in hematoxylin-eosin staining to achieve the proper colour contrast necessary for visualisation, by selectively removing excess hematoxylin from the tissue section and leaving behind the desired staining intensity.

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ with DAPI is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: Merck

M-FIX is a fixative spray designed for the wet fixation of gynaecological and non-gynaecological preparations processed in Papanicolaou staining. It contains polyglycols in alcoholic solution and a rapid and secure fixation of specimens is possible.

Supplier: SIGMA ALDRICH MICROSCOPY

Fluoroshield™ with PPD (p-phenylenediamine; 1,4-phenylenediamine) is an aqueous mounting medium for preserving fluorescence of tissue and cell smears.

Supplier: Avantor

Microscopy and staining reagents, J.T.Baker®, Cervix spray fixative

Supplier: SIGMA ALDRICH MICROSCOPY

This is a mounting medium (contains 45% acrylic resin and 55% xylenes) used in microscopy. It is an adhesive and specimen preservative that can be used manually and in automated coverslipping equipment. Special purpose adhesive and sealant for use with glass, non plastic and other non-reactive materials.

Supplier: SIGMA ALDRICH MICROSCOPY

JB-4 is a water-soluble, GMA based, plastic resin kit intended for use in the preparation of embedded samples for high resolution light microscopy. It is a technique now widely used for research and clinical diagnosis. JB-4 yields semi-thin sections (0.5μ-2μ) with excellent morphological preservation.

Supplier: SIGMA ALDRICH MICROSCOPY

Hartman′s fixative, which is also known as Davidson′s Fixative, contains acetic acid, alcohol, and formalin. It is widely used for the preservation of eye, bone marrow, breast, testis, and other tissues for histologic examination

Supplier: Merck

DPX new is a synthetic non aqueous mounting medium for microscopy. In its formulation, the teratogenic plasticiizer dibutyl phthalate (DBP) has been avoided, which renders the composition safer for the environment and more user friendly than the conventionally used mounting agents such as DPX.

Supplier: Merck

Kaiser's glycerol gelatin is an aqueous mounting medium for microscopy and works well with specimens prepared for enzyme, lipid, and immunohistochemistry determinations.

Supplier: SIGMA ALDRICH MICROSCOPY

Glycerol alters the hygroscopic property of gelatin and its permeability to water vapour. Glycerol gelatin or glycerine jelly medium is an aqueous slide mounting media, used for mounting samples in microscopy and histology.

Supplier: Merck

The defined hardness and uniformity of the material to be cut are vital requirements in creating consistent quality in cutting. These requirements can be met using a range of suitable substances, such as paraffins, resins, gelatine and celloidin.

Supplier: SIGMA ALDRICH MICROSCOPY

Araldite® is an epoxy resin commonly used for embedding. It is basically free from polymerization damage and the plastic does not sublime in the microscope, hence providing continual support and preservation of fine detail.[1] It is composed of araldite M or CY 212, dodecenyl succinic anhydride, dibutyl phthalate and 2,4,6-tridimethylamine methyl phenol.

Supplier: SIGMA ALDRICH MICROSCOPY

Spurr resin is a hydrophobic resin. It is less viscous than epon mixtures and is easier to dispense. The low viscosity of the resin contributes to its penetration in tissue, mineral and dense structures. A low viscosity of 60 cps also allows easy penetration into a variety of difficult materials.