You searched for: Fittings and Connectors

Supplier: Restek

This kit includes a ¹/₄" stainless steel nut and graphite ferrule for attaching the liner to the GC inlet and a ¹/₄ to ¹/₁₆" stainless steel reducer, plus a ¹/₄" and 0,5 mm ID graphite ferrule for attaching the column to the liner.

Supplier: Restek

These fingertight capillary column nuts rapidly tighten without wrenches and can be used with 0,25, 0,32, or 0,53 mm ID columns.

Supplier: UPCHURCH SCIENTIFIC

MarvelX biocompatible PEEK-lined stainless steel UHPLC connection system is easy to use and eliminates dead volume. It also provides higher repeat uses without sacrificing from consistent performance.

Supplier: UPCHURCH SCIENTIFIC

VHP Microferrules are made from a proprietary high performance PEEK polymer blend, a material which is unique in its ability to enable the use of capillary tubing in UHPLC environments.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.

Supplier: UPCHURCH SCIENTIFIC

This micro injection port adapter assembly can be connected to 360 µm Ext.Ø capillary tubing to introduce samples. It accepts standard 22 gauge Hamilton-style injection syringe needles. The needle butts directly against the connecting tubing during injections, therefore no additional swept volume is added to the fluid pathway by this adapter.

Supplier: Restek

Universal 10-32 PEEK connectors for easy installation of all ¹/₁₆" tubing, it includes stainless steel, up to 345 bar.

Supplier: LENZ, E. (Lenz Laborglas GmbH & CO.KG)

Connectors, made of PBT, red with integrated silicone (VMQ)-PTFE sealing.

Supplier: Restek

Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in Siltek®/Sulfinert® or Silcosteel®-CR treatment.

Supplier: witeg Labortechnik

Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.

Supplier: Restek

Vespel/graphite ferrule, fitting size 0,8 mm, Hole Ø: 0,5 mm

Supplier: VICI JOUR RESEARCH

Ferrule, SS bushing, PEEK, For tubing ext.Ø: 1/32"

Supplier: CADENCE SCIENCE

Luer to closed end thread 1/16 - 3/32", Brass

Supplier: Restek

These capillary nuts are ideal for Shimadzu 17A, 2010, and 2014 GCs.

Supplier: UPCHURCH SCIENTIFIC

These fittings are made from stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Blanking flanges made of aluminium or stainless steel.

Supplier: EDWARDS HIGH VACUUM METTLER

Cross pieces made of aluminium or stainless steel.

Supplier: UPCHURCH SCIENTIFIC

PEEK or PCTFE.

Supplier: Restek

Graphite two-piece construction. For Shimadzu 17A, 2010, and 2014 GCs.

Supplier: Restek

These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.

Supplier: UPCHURCH SCIENTIFIC

These low pressure unions are made from PEEK, ETFE, Delrin or PP.

Supplier: UPCHURCH SCIENTIFIC

Upchurch Scientific® NanoTight™, F-142N, ferrules, ETFE natural, 10-32 coned port, for 1/16" OD tubing, 4000 psi, ETFE

Supplier: Restek

This conversion fitting is a flat, soft aluminum sealing ring deforms and butt-seals against the MSD interface. A standard Vespel® ferrule seals the column and 1,59 mm stainless steel nut.

Supplier: UPCHURCH SCIENTIFIC

These female M6 adapters are made from PEEK, EFTE or PCTFE.

Supplier: UPCHURCH SCIENTIFIC

LuerTight™ fittings are designed for connecting fluoropolymer tubing without barbs or nuts. By integrating ferrules into the Luer bodies, these fitting reliably hold tubing in place while giving the convenience of a Luer connection.

Supplier: UPCHURCH SCIENTIFIC

Ultra high performance fittings are manufactured from a proprietary PEEK blend (PK) which allow them to be used at higher temperatures (up to 200 °C) and higher pressures.

Supplier: Restek

These ferrules are made of aluminium eliminate out-gassing and make leak-tight seals for less detector noise. Its unique two-piece design permanently locks on fused silica tubing without causing breakage.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.

Supplier: UPCHURCH SCIENTIFIC

These PEEK adapters make connections to female ¹/₈" and ¹/₄" National Pipe Thread (NPT) ports.

Supplier: Restek

Fused silica adapter ferrules are made from valcon polyimide, a unique graphite reinforced composite that is specially made to maximise mechanical stability at temperatures up to 350 °C.