You searched for: Fittings and Connectors

Supplier: Avantor Fluid Handling

Ideal for extremely corrosive materials—PFA will not rouge or pit.

Supplier: Avantor Fluid Handling

Convenience of a quick-disconnect in pressure and vacuum applications.

Supplier: Bohlender

Combination of capillaries and tubes of several HPLC systems in one desktop mount.

Supplier: CPC COLDER

Couplings allow rapid disconnect and reconnect with one hand and without the need for tools.

Supplier: Avantor Fluid Handling

Closed-system design ensures the safety of your environment and employees - at all phases of chemical handling.

Supplier: Bohlender

Miniature distributors, made of PTFE, with female thread UNF ¼" 28 G, blockshaped, with holes for mounting (2×Ø 3,5 mm).

Supplier: Trajan Scientific and Medical

Graphite ferrules are commonly used in GC systems on the inlet and detector ends because they don’t stick to the column, and can be removed and reinserted easily. They should not be used with GC/MS instruments because of permeability to air.

Supplier: Trajan Scientific and Medical

Vespel GC ferrules are made from 100% high-temperature polyimide, a hard polymeric material that tends to seal permanently to capillary columns when in use. A firm torque is required to compress and seal.

Supplier: CPC COLDER

MPU series twist-to-connect design features an easy-to-use locking mechanism that guards against accidental disconnects and provides a reliable, secure connection.

Supplier: CPC COLDER

Steam-Thru II Connections offer the flexibility of 'steam on' and 'steam off' functionality. The innovative design allows the valve to be returned to the steam position enabling a second SIP cycle following media transfer.

Supplier: HAMILTON BONADUZ

The compression fittings and adaptors are designed to connect Hamilton removable needle (RN) and knurled hub (KH) syringes to glass capillary tubing and PEEK tubing. The connectors can be combined in a variety of different configurations to meet most connection needs.

Supplier: KARTELL

These quick disconnector is useful for joining hoses of glass, rubber or plastic. Connectors fit tightly together. Replace expensive adapters.

Supplier: Thermo Fisher Scientific

Most Nalgene® closures and those of other manufacturers can be retrofitted with these connectors for liquid transfer without a ventilation and venting device. To do this, simply drill two fitting holes in the closure, feed in the insert and tube connectors and attach tubes with 6 or 13 mm internal diameter. Nalgene® closures 53B (53 mm) can only be fitted with the 6 mm tube connectors, the 83B (83 mm) closures can be equipped with both 6 and 13 mm connectors.

Supplier: KARTELL

PP, translucent.

Supplier: Welch by Gardner Denver

It provides a flange fitting type.

Supplier: Welch by Gardner Denver

Tees, Tees, type KF, DN25, Stainless steel

Supplier: VACUUBRAND

These flanges are made from aluminium or plastic.

Supplier: VACUUBRAND

These small flanges with thread made of stainless steel.

Supplier: Welch by Gardner Denver

Reducing tees, type KF made of stainless steel.

Supplier: COWIE

Straight through connectors, made of PTFE, bayonet type for flexible tubings.

Supplier: Thermo Fisher Scientific

SilTite™ ferrules are designed for use with capillary column connectors.

Supplier: KARTELL

PP, translucent.

Supplier: B. Braun

Fluid dispensing connectors with luer-lock connections for syringes

Supplier: Thermo Fisher Scientific

PP, translucent.

Supplier: KARTELL

PP, white.

Supplier: Thermo Fisher Scientific

HDPE, translucent.

Supplier: VACUUBRAND

Small flanges made of stainless steel with sealing ring made of NBR.

Supplier: Thermo Fisher Scientific

These capillary column end caps are universal and fit any capillary column.

Supplier: VACUUBRAND

Reducing pieces with small flanges KF made of aluminium or stainless steel.

Supplier: BROEN-LAB

BROEN-LAB offers BROEN-LAB UniFlex™ hoses and flexible Stainless Steel pipes as an easy way to make the installation in the laboratory where safety and efficiency are required. BROEN-LAB UniFlex™ hoses are the ideal solution where there is a higher requirement for flexibility. Installation with flexible hoses saves time and labour - in other words - reduced installation costs.