You searched for: Fittings and Connectors

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing (e.g. Viton®, Tygon®, silicone).

Supplier: Avantor

The HI-065 female-female connector consists of a 60 mm length of 1/16" (0,007 mm) PEEK tubing with PEEK fingertight fittings and is suitable for connecting to all end fittings.
The HI-061 male-male connector provides an ultra low dead volume and comes complete with two PEEK end fittings.

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors of elastic tubing with different inner diameters.

Supplier: Bohlender

Fitting made of PTFE for transition of Tri-Clamp as per DIN 32 676 to a hose connector.

Supplier: Bohlender

The Cross-shaped fitting, made of PTFE with four connectors for elastic tubing.

Supplier: Bohlender

Y-shaped fitting made of PP, with three hose connectors for elastic tubing.

Supplier: Bohlender

Straight fitting, made of PTFE, with two connectors for elastic tubing with different inner diameters.

Supplier: Bohlender

Straight fitting made of PP, with two hose connectors for elastic tubing.

Supplier: CPC COLDER

These high flow couplings feature automatic shut-off valves which stop flow and eliminate the need for pinch clamps, stainless steel connectors or fittings.

Supplier: Bohlender

Fittings made of PTFE to fix tubing in the tubing connectors (thread NPT ¹/₈") of b.safe caps. The conical seal cone clamps the tubing and tightens at the connector. Packing unit: 1 piece.

Supplier: CPC COLDER

FitQuik™ Connectors from Colder Products Company are high quality fittings for leak-free tubing connections. These precision molded fittings are designed to eliminate tubing leak points in applications such as medical devices, analytical instrumentation or air-driven equipment.

Supplier: Bohlender

Fittings made of PE to fix tubing in the capillary connectors (thread UNF ¹/₄" 28G) of b.safe Caps PFAS Analytic.

Supplier: Bohlender

Straight fitting, made of PTFE, with one connector for elastic tubing (e.g. Viton®, Tygon®, silicone) and one screw-in thread (either NPT or G).

Supplier: Bohlender

Extension of the number of capillary and/or tubing connectors on a b.safe Waste Cap. With PFA Fittings for capillaries with Ext.Ø 1,6/2,2/3,2 mm (thread UNF ¹/₄"), 1 hose connector for tubing Int.Ø 5,5 to 8,0 mm (thread NPT ¹/₈").

Supplier: Avantor Fluid Handling

Provide easy, secure, sterile connections even in nonsterile environments.

Supplier: Avantor

PEEK HPLC column inlet / outlet connectors. These column connectors are designed for use at both the column inlet and outlet ends. They are suitable for use with ¹/₁₆" ext.Ø tubing and all manufacturers' HPLC systems and all brands of HPLC columns.

Supplier: Avantor Fluid Handling

No tools needed for assembly.

Supplier: Avantor Fluid Handling

Fittings connect in a snap.

Supplier: Avantor Fluid Handling

Quick and easy assembly.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

Easily transition to a luer fitting.

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.

Supplier: Avantor Fluid Handling

Maintain sanitary conditions.

Supplier: Avantor Fluid Handling

Quick and easy assembly without tools.

Supplier: Avantor Fluid Handling

Meets FDA requirements and 3A sanitary standards.

Supplier: Avantor Fluid Handling

These compliant, biocompatible fittings provide assurance, integrity, and cost-effective solutions.

Supplier: Avantor Fluid Handling

Maintain sanitary conditions while quickly connecting to tubing.

Supplier: Avantor

Precision-machined stainless steel nuts and ferrules.

Supplier: VWR Chemicals

Coupler, female hose, Hole Ø: 8 mm, Length: 1,2 m, Thread: DN 6

Supplier: Avantor Fluid Handling

Easily transition between luer fittings and UNF or NPT threads.