You searched for: Environmental Analysis Standards

Supplier: LGC Standards PROMOCHEM

This standard reference material is intended for use as an isotopic reference material for the calibration of mass spectrometers. The material consists of highly purified boric acid of high homogeneity.

Supplier: Restek

This MA fractionation surrogate spike mix contains two components: 2-Bromonaphthalene and 2-Fluorobiphenyl.

Supplier: Restek

MA EPH aliphatic hydrocarbon standard, 1000 µg/ml each in hexane, : N/A, 1 ml/ampoule

Supplier: Restek

Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfy your ISO requirements.

Supplier: Restek

612 Chlorinated hydrocarbons calibration mix contains 2-chloronaphthalene, 1,2-dichlorobenzene, 1,3-dichlorobenzene, 1,4-dichlorobenzene, hexachlorobenzene, hexachlorobutadiene, hexachlorocyclopentadiene, hexachloroethane, 1,2,4-trichlorobenzene.

Supplier: Restek

Revised GPC calibration mix is a qualitative mixture and it is useful for determining GPC dump/collect times. The compounds are dissolved in methylene chloride at various concentrations.

Supplier: LGC Standards PROMOCHEM

This reference standards are intended to use in the determination of trace elements in fresh water. The solution contains nitric acid at a volume fraction of approximately 2%, equivalent to an amount of substance concentration (molarity) of approximately 0,32 mol/l and also it simulates the elemental composition of fresh water.

Supplier: Restek

8270 calibration mix #6, 2000 µg/ml each in methylene chloride, : N/A, 1 ml/ampoule

Supplier: Restek

Contains: Aniline (62-53-3); Benzidine (92-87-5); 4-Chloroaniline (106-47-8); 3,3'-Dichlorobenzidine (91-94-1); Diphenylamine (122-39-4)*; 2-Nitroaniline (88-74-4); 3-Nitroaniline (99-09-2); 4-Nitroaniline (100-01-6); N-Nitrosodimethylamine (62-75-9); N-Nitrosodi-n-propylamine (621-64-7); Pyridine (110-86-1)

Supplier: Restek

This TNRCC 1005 retention time marker mix used during initial sample screening to determine retention time windows for each petroleum product.

Supplier: Restek

This standard mixture cobtains: (C10) n-Decane, (C12) n-Dodecane, (C14) n-Tetradecane, (C16) n-Hexadecane, (C18) n-Octadecane, (C20) n-Eicosane, (C22) n-Docosane, (C24) n-Tetracosane, (C26) n-Hexacosane, (C28) n-Octacosane, (C30) n-Triacontane, (C32) n-Dotriacontane, (C34) n-Tetratriacontane, (C36) n-Hexatriacontane, (C38) n-Octatriacontane and (C40) n-Tetracontane.

Supplier: Restek

This contais 54 components, incorporates all phenols, for fast preparation and calibration, incorporates 'additional' extractable method 625 compounds. GC-MS method applicable to analysis of organic compounds in water and soil.

Supplier: Restek

The mix consists of components such as 2-chlorophenol-d4 (1500 μg/ml), 1,2-dichlorobenzene-d4 (1000 μg/ml), 2-fluorobiphenyl (1000 μg/ml), 2-fluorophenol (1500 μg/ml), nitrobenzene-d5 (1000 μg/ml).

Supplier: Restek

This mix also can be used for underground storage tank monitoring.

Supplier: Restek

This TNRCC 1006 retention time marker mix contains: (C6) n-Hexane, (C7) n-Heptane, (C8) n-Octane, (C10) n-Decane, (C12) n-Dodecane, (C16) n-Hexadecane, (C21) n-Heneicosane, (C28) n-Octacosane, (C35) n-Pentatriacontane.

Supplier: Restek

The california oxygenates mix consists of five components they are tert-amyl methyl ether (TAME) 2000 μg/ml, tert-butanol (TBA) 10000 μg/ml, diisopropyl ether (DIPE) 2000 μg/ml, ethyl-tert-butyl ether (ETBE) 2000 μg/ml and methyl tert-butyl ether (MTBE) 2000 μg/ml.

Supplier: Restek

Contains: Acenaphthene (83-32-9); Acenaphthylene (208-96-8); Anthracene (120-12-7); Benz(a)anthracene (56-55-3); Benzo(a)pyrene (50-32-8); Benzo(b)fluoranthene (205-99-2); Benzo(ghi)perylene (191-24-2); Benzo(k)fluoranthene (207-08-9); Chrysene (218-01-9); Dibenz(a,h)anthracene (53-70-3); Fluoranthene (206-44-0); Fluorene (86-73-7); Indeno(1,2,3-cd)pyrene (193-39-5); 1-Methylnaphthalene (90-12-0); 2-Methylnaphthalene (91-57-6); Naphthalene (91-20-3); Phenanthrene (85-01-8); Pyrene (129-00-0)

Supplier: Restek

Contains 1 ml each of the following mixtures, SV calibration mix #1 (anilines), SV calibration mix #2 (phenols), SV calibration mix #3 (base neutrals), SV calibration mix #4 (base neutrals), SV calibration mix #5 (PAHs), SV calibration mix #7 (dichlorobenzenes) and 605 benzidines calibration mix (benzidine and 3,3'-dichlorobenzidine).

Supplier: Restek

EPA method 8330 is used to measure explosives residues in water and soil samples, using HPLC with UV detection. Target analytes are nitroaromatic and nitramine explosives and their degradation products. Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult. To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

Supplier: Restek

EPA method 8330 is used to measure explosives residues in water and soil samples, using HPLC with UV detection. Target analytes are nitroaromatic and nitramine explosives and their degradation products. Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult. To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

Supplier: Restek

610 PAH calibration mix A contains acenaphthene (1000 μg/ml), acenaphthylene (1000 μg/ml),anthracene (1000 μg/ml), benz(a)anthracene (500 μg/ml), benzo(a)pyrene (500 μg/ml), benzo(b)fluoranthene (500 μg/ml)
benzo(k)fluoranthene (500 μg/ml), benzo(ghi)perylene (500 μg/ml), chrysene (500 μg/ml), dibenz(a,h)anthracene (500 μg/ml), fluoranthene (500 μg/ml), fluorene (1000 μg/ml), indeno(1,2,3-cd)pyrene (500 μg/ml), naphthalene (1000 μg/ml), phenanthrene (500 μg/ml), pyrene (500 μg/ml).

Supplier: Restek

Contains: Benzoic acid (65-85-0); 4-Chloro-3-methylphenol (59-50-7); 2-Chlorophenol (95-57-8); 2,4-Dichlorophenol (120-83-2); 2,6-Dichlorophenol (87-65-0); 2,4-Dimethylphenol (105-67-9); 4,6-Dinitro-2-methylphenol (Dinitro-o-cresol) (534-52-1); 2,4-Dinitrophenol (51-28-5); Dinoseb (88-85-7); 2-Methylphenol (o-cresol) (95-48-7); 3-Methylphenol (m-cresol) (108-39-4); 4-Methylphenol (p-cresol) (106-44-5); 2-Nitrophenol (88-75-5); 4-Nitrophenol (100-02-7); Pentachlorophenol (87-86-5); Phenol (108-95-2); 2,3,4,6-Tetrachlorophenol (58-90-2); 2,4,5-Trichlorophenol (95-95-4); 2,4,6-Trichlorophenol (88-06-2)

Supplier: Restek

Contains: Aramite (140-57-8); Bis(2-chloroethyl)ether (111-44-4); Bis(2-chloroethoxy)methane (111-91-1); 4-Bromophenyl phenyl ether (101-55-3); Chlorobenzilate (510-15-6); 2-Chloronaphthalene (91-58-7); 4-Chlorophenyl phenyl ether (7005-72-3); 1,2-Dichlorobenzene (95-50-1); 1,3-Dichlorobenzene (541-73-1); 1,4-Dichlorobenzene (106-46-7); 1,3-Dinitrobenzene (99-65-0); Hexachlorobenzene (118-74-1); Hexachlorobutadiene (87-68-3); Hexachlorocyclopentadiene (77-47-4); Hexachloroethane (67-72-1); Hexachloropropene (1888-71-7); Isodrin (465-73-6); Kepone (143-50-0); 2,2'-Oxybis(1-chloropropane) (108-60-1); Pentachlorobenzene (608-93-5); Pentachloronitrobenzene (quintozene) (82-68-8); 1,2,4,5-Tetrachlorobenzene (95-94-3); 1,2,4-Trichlorobenzene (120-82-1)

Supplier: Restek

The compund consists of components such as, acenaphthene (100 μg/ml), acenaphthylene (100 μg/ml), anthracene (100 μg/ml), benz(a)anthracene (10 μg/ml), benzo(a)pyrene (10 μg/ml), benzo(b)fluoranthene (10 μg/ml), benzo(ghi)perylene (10 μg/ml), benzo(k)fluoranthene (5 μg/ml), chrysene (10 μg/ml), dibenz(a,h)anthracene (10 μg/ml), fluoranthene (10 μg/ml), fluorene (100 μg/ml), indeno(1,2,3-cd)pyrene (10 μg/ml), 1-methylnaphthalene (100 μg/ml), 2-methylnaphthalene (100 μg/ml), naphthalene (100 μg/ml), phenanthrene (100 μg/ml), pyrene (10 μg/ml).

Supplier: Restek

625 kit contains 604 phenols calibration mix: 4-chloro-3-methylphenol (59-50-7), 2-chlorophenol (95-57-8), 2,4-dichlorophenol (120-83-2), 2,4-dimethylphenol (105-67-9), 4,6-dinitro-2-methylphenol (dinitro-o-cresol) (534-52-1), 2,4-dinitrophenol (51-28-5), 2-nitrophenol (88-75-5), 4-nitrophenol (100-02-7), pentachlorophenol (87-86-5), phenol (108-95-2), 2,4,6-trichlorophenol (88-06-2), benzidines calibration mix: benzidine (92-87-5), 3,3'-dichlorobenzidine (91-94-1), 606 phthalate esters calibration mix: bis(2-ethylhexyl)phthalate (117-81-7), benzyl butyl phthalate (85-68-7), di-n-butyl phthalate (84-74-2), diethylphthalate (84-66-2), dimethylphthalate (131-11-3), di-n-octyl phthalate (117-84-0),31032: 607 nitrosamines calibration mix, n-nitrosodimethylamine (62-75-9), n-nitroso-di-n-propylamine (621-64-7), n-nitrosodiphenylamine (86-30-6),31033: 609 nitroaromatics & isophorone calibration mix: 2,4-dinitrotoluene (121-14-2), isophorone (78-59-1), 2,6-dinitrotoluene (606-20-2), nitrobenzene (98-95-3),31011: sv calibration mix #5/610 pah mix: acenaphthene (83-32-9), acenaphthylene (208-96-8), anthracene (120-12-7), benz(a)anthracene (56-55-3), benzo(a)pyrene (50-32-8), benzo(b)fluoranthene (205-99-2), benzo(k)fluoranthene (207-08-9), benzo(ghi)perylene (191-24-2), chrysene (218-01-9), dibenz(a,h)anthracene (53-70-3), fluoranthene (206-44-0), fluorene (86-73-7), indeno(1,2,3-cd)pyrene (193-39-5), naphthalene (91-20-3), phenanthrene (85-01-8), pyrene (129-00-0),31034: 611 haloethers calibration mix, bis(2-chloroethoxy)methane (111-91-1), bis(2-chloroethyl)ether (111-44-4), 4-bromophenyl phenyl ether (101-55-3), 4-chlorophenyl phenyl ether (7005-72-3), 2,2'-oxybis(1-chloropropane) (108-60-1),31035: 612 chlorinated hydrocarbons calibration mix: 2-chloronaphthalene (91-58-7), 1,2-dichlorobenzene (95-50-1), 1,3-dichlorobenzene (541-73-1), 1,4-dichlorobenzene (106-46-7), hexachlorobenzene (118-74-1), hexachlorobutadiene (87-68-3), hexachlorocyclopentadiene (77-47-4), hexachloroethane (67-72-1), 1,2,4-trichlorobenzene (120-82-1).