Supplier: LABCONCO

WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

Supplier: ELGA LabWater

Ideal water system for a new start up lab. Advanced and affordable, providing tap to Type I water.

Supplier: SELECTA

Aquasel is suitable for continuous distilled water requirements.

Supplier: Thermo Fisher Scientific

The Barnstead™ E-Pure™ is designed to connect directly to the tap water feed, and it can handle all of the laboratory high volume ultrapure water applications with low operating costs. This system is ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers.

Supplier: ELGA LabWater

PURELAB Chorus 3 provides Type III (primary RO grade) water on demand.

Supplier: Thermo Fisher Scientific

This system is a modularly designed laboratory reverse osmosis system specifically developed for functional and economical production of high purity water. Ideal for routine laboratory work: Rinsing lab glassware, supplying autoclaves, water baths and incubators, preparing and diluting buffers and reagents and general biotechnology.

Supplier: ELGA LabWater

The PURELAB Chorus 2+ range provide >15 MΩ.cm pure water. The systems provide additional bacteria and inorganic quality for sensitive analytical and life science applications above that of basic laboratory work. With its simple design and ease of use, water can be dispensed from the system or from a choice of additional Halo Dispensers.

Supplier: ELGA LabWater

The PURELAB flex 2 uniquely combines ease of use with the accurate delivery of pure water. The flexible modular system can be configured to deliver the quality of water you need for your applications and includes UV photo-oxidation and TOC monitoring. Delivers up to two liters per minute of type I water.

Supplier: BEHR

The standard canister is made of V4A stainless steel with widespread pure water supply applications. They are aslo suitable for second stage purification steps following reverse osmosis. The unique behropur® slit-jet system distributes the input water uniformly over the entire resin bed, thus maximizing exchange capacity and water quality.

Supplier: Thermo Fisher Scientific

Suitable for even the most demanding and sensitive applications, the family of Thermo Scientific™ Barnstead™ GenPure™ water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality.

Supplier: Thermo Fisher Scientific

These water purification systems deliver ultrapure 18,2 MΩ.cm water with consistent quality. They are designed for laboratories that require up to 15 L/day of ultrapure water for HPLC or other instrumental analyses, sample preparation, glassware rinsing, or molecular biology work in which endotoxins and/or nucleases would interfere.

Supplier: Thermo Fisher Scientific

Count on the Thermo Scientific™ Aquanex™ Ultrapure water purification systems for convenience, flexibility and reliable water purity. With an intuitive touch screen interface and easy-access consumables, you can spend more time on your research and less time maintaining your equipment.

Supplier: LABCONCO

WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

Supplier: GLASWARENFABRIK KARL HECHT

Ion exchanger for purified water.

Supplier: Thermo Fisher Scientific

It is a simple, cost effective method for deionisation or pretreatment of lab water. Typically these units are ideal where water usage is up to 38 litres per day.

Supplier: BEHR

These deionisers are thick-walled, robust and practical mixed-bed ion exchangers made of blue polyethylene with free output to the storage tank. Ideal also for subsequent demineralisation of reverse osmosis system or for an ambitious aquarist.

Supplier: GLASWARENFABRIK KARL HECHT

Complete water distilling apparatus with heater and directions for use.

Supplier: Thermo Fisher Scientific

These B-Pure™ laboratory-grade water systems are designed for pre-treatment or deionization application needs. The design provides the ability to add additional holders when the need arises. Choose from single, double or half-size holders.

Supplier: Restek

This Parker HydroGen mate deionising water system is an economical means of providing deionized water to hydrogen generators or for other uses. It removes organics, phosphates, chlorine and essentially all ionizable constituents from water supply.

Supplier: BEHR

Mixed bed ion exchanger for small to medium quantities of ultrapure water to the supply from laboratory dishwashers to general care in the laboratory and for smaller consumers in the industry.

Supplier: AQUADEM

The polyamide range is a set of demineralisation columns using mixed-bed ion exchange resin technology. These devices ensure deionised water production of between 5 and 15 MΏ/cm according to whether the installation type is single or double cycle.

Supplier: ELGA LabWater

Delivering the ultimate in water purity for absolute confidence in your results.
Solutions for Type I ultrapure water.

Supplier: OSMOFILTER

Semi-industrial Maxi 600 direct flow osmosis equipment intended for medium production water treatment to supply small bars, restaurants, aquariums, plant irrigation and more. Maxi 600 includes two 300 GPD membranes each and is capable of producing up to 60 L/hour of pure, low-mineralisation water.

Supplier: Thermo Fisher Scientific

The Barnstead Smart2Pure™ system is a compact system that converts tap water into both ASTM Type I and Type II water. It produces 3 or 6 liters of ultra-pure water per hour.