You searched for: Ovens

Supplier: NABERTHERM

With their convincing price/performance ratio and the fast heat-up rates, these compact muffle furnaces are perfect for many applications in the laboratory. Quality features like the dual-shell furnace housing of rust-free stainless steel and their compact, lightweight construction. The heating elements encased in quartz glass tubes make these models reliable partners for your application. The furnaces have Tmax 1100 °C, working temperature of 1050 °C.

Supplier: NABERTHERM

The BO series is specially designed for processes in which larger sample quantities must be incinerated. Mainly used in the fields such as ashing of food, thermal cleaning of injection molding tools or determination of annealing loss.

Supplier: NABERTHERM

The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Supplier: Thermo Scientific

The LUT ovens are designed for drying paint and other coatings where solvents in the air can form explosive atmospheres, where there is a restriction on the maximum quantity of solvent*. The LUT 6050 F is for installation in areas subject to fire hazards, e.g. where laquers are handled. The inner chamber and all fittings are made of 1,4301 stainless steel, and insulating materials are free of surface active substances (no silicone is used). The formation of vapour pockets is avoided by a well directed air supply system, fresh air is filtered and pre-heated before it enters the chamber, a radial fan ensures the heated fresh air and solvent vapours mix efficiently.

Supplier: NABERTHERM

The durability of the SiC rods in periodic use, in combination with their high heating speed, make these high-temperature furnaces good all-rounders in the laboratory. Heating times of 40 minutes to 1400 °C can be achieved, depending on the furnace model and the conditions of use.

Supplier: NABERTHERM

The LT 3/12 - LT 60/12 muffle furnaces are the ideal choice for daily laboratory use. These high quality models have an advanced and attractive design, and are very reliable. The muffle furnaces have a lift up door as standard.

Supplier: NABERTHERM

Ovens that are designed for drying and evaporation of solvent-containing materials. Furnace based technology utilised for ovens, units have a 1.4301 (DIN) stainless steel chamber, which is rust-resistant and easy to clean, they feature horizontal forced convection.

Supplier: BOEKEL SCIENTIFIC

The Shake ‘N’ Bake hybridisation oven is ideal for hybridising and pre hybridising membranes used in Southern and Northern blotting techniques. The gentle rocking motion provides washes that are less messy than a shaking water bath and more convenient than a shaker inside a conventional incubator. The small footprint conserves valuable bench space.

Supplier: NABERTHERM

These compact tube furnaces with a SiC rod heating and integrated switchgear with controller can be used universally for many processes. They represent an inexpensive variant in the high-temperature range. The standard mounting options for accessories make them flexible for use in a wide range of applications.

Supplier: Cole Parmer

Versatile - features both rotisserie and rocking motions.

Supplier: NABERTHERM

These compact tube furnaces are used when laboratory experiments must be performed horizontally, vertically, or at specific angles. The ability to configure the angle of tilt and the working height, make these tube furnaces suitable for integration into existing process systems.

Supplier: NABERTHERM

These compact bench top tube furnaces with integrated controllers can be widely used for a variety of processes. Equipped with a standard C 530 ceramic working tube and two fibre plugs they have an unbeatable price/performance ratio. Units feature rust-free, textured stainless steel exteriors. R models feature Tmax 1200 or 1300 °C, RD models have Tmax 1100 or 1300 °C.

Supplier: Cole-Parmer

Use and recover volumes as low as 5 ml, ensuring preservation of precious samples.

Supplier: BOEKEL SCIENTIFIC

Hybridisation and wash methods vary according to application and personal choice. Boekel Scientific offers a range of hybridisation incubators with features that include digital display for ease and reproducibility of temperature setting; microprocessor or proportional temperature control; rapid heat-up, optimised heater power and natural or forced air convection.

Supplier: SELECTA

The 2000 series 'Conterm' drying and sterilisation ovens are constructed with corrosion resistant epoxy coated exterior and have a double walled interior chamber made of AISI 304 stainless steel, with self adjusting door seal and adjustable shelves and guides. Ovens features temperature thermostat control with analogue thermometer for adjustable temperatures from 40 to 250 °C. They have an independent insulated control panel with controllable safety thermostat that disconnects power to the heater in case of a fault in the main thermostat, manual reset and function signal lamp. Independent heating chamber for the heating elements to obtain an even heat distribution and rapid temperature equilibrium and stabilisation.

Supplier: SELECTA

The 'Digitronic' universal precision ovens of the 2000 series with microprocessor control and digital display of temperature with pre-set programmable run time and pre-set temperature monitoring using a Pt100 sensor probe. The inner chamber and pre-mixing chamber are made of AISI 304 stainless steel and epoxy coated exterior. The shelves are made of stainless steel, with adjustable height positions for shelves and guides and with flexible silicone door gasket around the entrance of the door. The homogeneously distributed shielded heating elements ensures complete air circulation throughout. The turbo fan made of AISI 304 stainless steel makes to circulate the air at the working temperature. The models are available either with toughened double safety glass door for viewing the contents of the oven without having to open the door or with the solid metal door.

Supplier: SELECTA

The 'Digitheat' 2000 series drying and sterilisation ovens with microprocessor control and digital display have a corrosion resistant, epoxy coated exterior and an AISI 304 stainless steel double chamber, with self adjusting door seal and adjustable shelves and guides. They have an independent insulated control panel with controllable safety thermostat that disconnects the power to the heater in the event of a fault in the microprocessor, manual reset and function signal lamp. Independent heating chamber for the heating elements to obtain an even heat distribution and rapid temperature equilibrium and stabilisation.

Supplier: Thermo Fisher Scientific

Lindberg/Blue M Moldatherm box furnaces are versatile selection for a variety of industrial and laboratory applications.

Supplier: KOEHLER TECHNISCHE PRODUKTEN

Stainless steel exterior and interior.

Supplier: Thermo Fisher Scientific

Thermolyne™ muffle furnaces offer heating solutions for a number of application needs, from general laboratory use to industrial applications. Units are ideal for fast heat up and temperature control up to 1200 °C. The furnaces are used for chemical analysis, materials testing, determination of volatiles in waste water treatment plants, industrial plants, pharmaceutical and cosmetic companies, environmental laboratories, agriculture laboratories and paper manufacturers.

Supplier: Thermo Scientific

For incineration and annealing loss determinations, high temperature drying, materials testing and ashing processes on a laboratory scale. The heating coils are located and protected in T fixtures at the sides of the working area and the chamber inner surfaces are ceramic plates. They are easy to replace, with no renewal of the insulating material necessary. Optimum insulation and heating conditions produce a consistent temperature distribution in the oven chamber: max. fluctuation of 13 K.