You searched for: Electrochemistry Meters

Supplier: KNICK

These versatile, portable instruments can measure pH, ORP, conductivity and dissolved oxygen (optical). Thanks to their robustness and large selection of suitable sensors, they are suitable for both laboratory and process applications. Waterproof according to IP 66/IP 67.

Supplier: Thermo Orion

These bench top meters with pH/LogR module meet most challenging applications for pH, mV, ORP and LogR temperature. The meters offer interchangeable measurement modules that allow multiple users to customise four separate channels to meet their specific requirements. The LogR™ technology enables users to measure both pH and temperature using the glass-bulb of most pH electrodes – ideal for small sample volumes and samples that are difficult to clean.

Supplier: Greisinger

Pure measurement with a focus on precision, speed and reliability packaged in a compact housing distinguish an impressive price/performance ratio.

Supplier: Lovibond

The SensoDirect pH 110 is a simple, easy-to-use, portable pH meter.

Supplier: SHERWOOD SCIENTIFIC INSTRUMENT

Measurements of salt concentration (sodium chloride) are required throughout the food industry (dairy products, frozen goods, salted meats, beverages, etc) as well as in clinical situations.

Supplier: Cole-Parmer

Ideal for use in all laboratories where pH and conductivity analyses are required.

Supplier: Agilent

This full-range meter measures conductivity, resistivity, total dissolved solid (TDS), salinity, and present solution temperature. Ideal for use in environmental, petrochemical, biological and food applications.

Supplier: Testo

The testo 206 series is ideal for pH measurements in liquid and semi-solid media. The instruments offer a combination of a pH immersion probe and a temperature probe for precise and fast temperature compensation. Thanks to the large volume of gel electrolyte and the dual wall diaphragm, the probe is leak-proof, maintenance-free and insensitive to dirt.

Supplier: BEHR

Conductivity meter with connection hoses for water deionisers B10dN, B22dN, B45dN.

Supplier: HORIBA

These waterproof pocket meters directly measure calcium, potassium or sodium concentrations in 0,3 ml sample (or 0,05 ml sample with sampling sheet B). The unique flat sensor allows measurement of viscous liquids, solids, and even powder samples. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: HORIBA

This waterproof meter features a unique flat sensor that enables quick, accurate and direct measurements of micro samples as small as 0,12 ml. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: HORIBA

These pocket meters directly measure nitrate ion and nirate-nitrogen concentrations in 0,3 ml sample (or 0,05 ml sample with sampling sheet B). The unique flat sensor allows measurement of viscous liquids, solids, and even powder samples. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: HORIBA

These meters feature a unique flat sensor that enables quick, accurate and direct measurements of micro samples as small as 0,12 ml. The sensor does not need to be dipped into the sample, a few drops are sufficient.

Supplier: Cole-Parmer

4510 is an easy-to-use meter offering the flexibility to meet the broadest range of applications and for those where greater accuracy is required. With automatic conductivity standard recognition and endpoint detection. 4520 is a high specification laboratory conductivity/resistivity/TDS/salinity/°C meter that offers additional accuracy with 1, 2 or 3 point conductivity calibration across a wide measurement range. The dedicated 'pure water' mode ensures the optimum accuracy for this difficult application.

Supplier: HORIBA

This meter directly measures sodium ion concentration in 0,3 ml sample (or 0,05 ml with sampling sheet B) and converts it into salinity or NaCl salt concentration. The replaceable flat sensor utilises a sodium ion selective electrode (ISE) that requires only a few drops to enable quick and accurate analysis.

Supplier: Greisinger

For comfortable measurements of pH value and temperature.

Supplier: MOINEAU

This pH tester in pen format is used to measure the pH of a solution.

Supplier: WTW ONLINE

Universal monitor DIQ/S 281. The new system 281 - the digital and cost-efficient single parameter measuring point with proven IQ Sensor Net technology and IQ sensors for the standard parameters. Low-cost alternative to analog measuring points

Supplier: Lovibond

The SD40 Multi meter is a compact, easy to use handheld meter for the measurement of pH/Con/TDS/Salt/T.

Supplier: Hanna

pH tester supplied with interchangeable pH combination electrode.

Supplier: HORIBA

These waterproof meters can measure and display up to 11 parameters simultaneously with one single probe. Thanks to their rugged design and their field replaceable sensors they are ideal for outdoor use, for example, when testing ground or surface water. Their compact size and the hand strap enable one-handed operation.

Supplier: METROHM

Portable single-channel conductivity measuring instrument for measuring conductivity/TDS/salinity and temperature. This is optimally equipped for measurements in the field with this battery-operated measuring instrument.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: METROHM

Top-level instruments with the highest degree of comfort.

Supplier: Lovibond

The SD 20 ORP meter is a compact, easy to use handheld meter for the measurement of ORP.

Supplier: METROHM

Handy and easy-to-use pH meter with rugged plastic housing for daily routine work in the laboratory.

Supplier: HORIBA

These pocket meters incorporate a flat sensor technology, using the same measurement principle as traditional glass electrodes but in a small and compact flat format. The flat electrode enables quick and accurate direct measurements of solid or liquid micro samples as small as 0,1 ml μl (0,05 ml when using the sampling sheet). Large volume samples can also be measured easily by immersing the sensor.

Supplier: CONSORT

Robust, dust- and splash-proof benchtop meters for several parameters.

Supplier: Lovibond

The SensoDirect 150 is designed for multi purpose operation and measures pH/Redox, dissolved oxygen and conductivity/TDS.

Supplier: Greisinger

This meter is a simple handheld instrument for measuring pH, mV, temperature and relative humidity (0,0 to 70,0).