You searched for: Seals
A variety of seals for the protection of lab samples from contamination are available at VWR. Secure microplate samples with films, foils, and sealing tapes; select products appropriate for ELISA, PCR, cold storage, and general incubation. Sealing mats minimize evaporation and eliminate cross-contamination. For beakers, flasks, petri dishes and other labware, choose sealing films that are heat or chemical resistant. Insure sample integrity with security seals that provide evidence of tampering. Mechanical seals are also offered.
Sealing film
Supplier: RATIOLAB
Microplate seal, Adhesive film/foil/tape (96/384 wells), Single sheet/mat/strip, Cover film, Aluminum universal cover film, Aluminium, Non sterile
Expand 3 Items
Replacement rotor seals for Rheodyne™ Injector models 7000/7010/7040
Supplier: Thermo Fisher Scientific
Thermo Scientific™ Rheodyne™ replacement rotor seals for injectors made of ETFE to maintain the performance of Rheodyne™ sample injectors for high-performance liquid chromatography (HPLC).
Expand 1 Items
Adhesive seal, VIEWseal™
Supplier: Greiner Bio-One
VIEWseal™ is an adhesive sealing film coated with a silicone adhesive, which only sticks when the film surface is pressed on. The film is easy to work with, even when wearing gloves (the film does not adhere to gloves).
Expand 1 Items
Adhesive seal, AMPLIseal™
Supplier: Greiner Bio-One
AMPLIseal™ is a self-adhesive sealing film notable for its low autofluorescence, in particular in the wavelength range critical for Real Time PCR. It consists of a thick PP film coated with a transparent acrylate adhesive. The adhesive layer is protected by a peelable polyester film. The strongly adhering acrylate adhesive provides reliable sealing, thereby minimising evaporation but without influencing the PCR reaction or the fluorescence measurement.
Expand 1 Items
Sealing ring for reaction vessels
Supplier: SciLabware
Silicone rubber sheathed with PTFE.
Expand 1 Items
Adhesive seals
Supplier: Greiner Bio-One
These adhesive seals offer an alternative to heat seals or sealing mats. EASYseal™ is a transparent adhesive film designed to cover microplates to protect samples from evaporation and contamination. It is suitable for routine laboratory use, including ELISA applications. BREATHseal™ is a gas permeable, pierceable membrane coated with an acrylic adhesive. It is ideal for bacterial, yeast and cell culture applications, assuring the protection of cell contents from contamination whilst maintaining oxygenation.
Expand 1 Items
Adhesive seal, SILVERseal™
Supplier: Greiner Bio-One
SILVERseal™ is a heat resistant, cold-resistant and pierceable aluminium foil, which is suitable for both PCR applications and sample storage.
Expand 1 Items
O-rings for PerkinElmer
Supplier: Agilent
These O-rings are equivalent to PerkinElmer ICP-OES O-rings for complete confidence.
Expand 5 Items
Tamperproof lock
Supplier: Aesculap
Security seal, Tamperproof lock with orange steam indicator
Expand 1 Items
WHEATON® MicroLiter® μLplate® Snap Caps and μLmats™
Supplier: DWK Life Sciences
A comprehensive line of 96-well microplates for chromatography, the Plate Sampling System™ uses closures familiar to those who work with standard chromatography vials.
Expand 16 Items
Sealing films, DuraSeal™
Supplier: DIVERSIFIED BIOTECH
This durable, heat and solvent-resistant LDPE stretch film has substantial advantages over common laboratory stretch films.
Expand 5 Items
Cover mat for deep 96-well plates
Supplier: RATIOLAB
Closures for 96-Well Deep-Well-Plates Low-Profile, 1,2 ml. Made of thermo-plastic elastomer (TPE).
Expand 1 Items
Intuvo gasket
Supplier: Agilent
The Agilent Intuvo GC system uses ferrule-free face seals for all fittings within the sample gas flow path.
Expand 1 Items
Cling film in dispenser box
Supplier: KING DISPOSABLES
Sealing film, Length: 300 m, Width: 30 cm, PVC
Expand 1 Items
Gaskets for screw caps
Supplier: witeg Labortechnik
Silicone with PTFE washers
Expand 1 Items
XRF thin film, Kapton®, VHG
Supplier: LGC Standards PROMOCHEM
XRF thin film of 7,6 µm thickness and 76,2×15240 mm roll.
Expand 1 Items
Food film, PVC
Supplier: KING DISPOSABLES
Food wrap cling film of eight micron thickness.
Expand 2 Items
Retaining rubber ring
Supplier: BANDELIN-ELECTRONIC
Retaining ring for insert containers in perforated lids or insert strips.
Expand 1 Items
O-rings, graphite
Supplier: Restek
These O-rings are made of graphite. Ideal for Bruker/Varian 1177 injectors.
Expand 4 Items
O-rings, silicone
Supplier: Restek
Silicone O-Rings for PerkinElmer Auto SYS XL or Clarus with CAP injector.
Expand 1 Items
O-rings for PerkinElmer PSS injector, Viton®
Supplier: Restek
O-rings for liners with OD 4 mm
Expand 1 Items
O-rings for McDowell 2-112-S0604-70
Supplier: VARIAN
O-ring, McDowell 2-112-S0604-70
Expand 1 Items
O-rings for Agilent GC, Viton®
Supplier: Restek
Viton® O-ring, fits split with 6,3 mm OD or splitless with 6,5 mm OD, max. temperature 300 °C
Expand 2 Items
Centerfold film, Precision Stat®
Supplier: FISHER CONTAINER
Clear LDPE, amine-free antistatic film ideal for partitioning during retrofitting or construction. Specially formulated to reduce particulate contamination.
Expand 1 Items
Peek washers for solvent extraction, ASE® Systems
Supplier: Restek
PEEK washers for ASE 200
Expand 4 Items
O-rings, graphite
Supplier: Restek
Graphite O-rings for PerkinElmer Auto SYS XL or Clarus GCs with PSS injector.
Expand 2 Items
: GRANT INSTRUMENTS
: BOCHEM
: VWR Collection
: DWK Life Sciences
: Thermo Fisher Scientific
: VWR Collection
: Oxford Nanopore Technologies
: Integra
: Industrial Physics
: AAT BIOQUEST
: Integra
: Palbam
: VWR Collection
: VWR Collection
: FACELLITATE
: NANOENTEK
: Greiner Bio-One