You searched for: Microplates

Supplier: FACELLITATE

The BIOFLOAT™ 384-well plate outperforms existing products by its anti-adhesive properties.

Supplier: Thermo Fisher Scientific

HyperSep® SLE provides a fast and effective sample preparation technique for removal of phospholipids from biological matricies. HyperSep® SLE deals with sample preparation of biological matricies via a simple, efficient and an effective protocol, the focus being the removal of interfering phospholipids which cause a number of issues for end point analysis.

Supplier: Greiner Bio-One

96-well membrane plates are designed for high throughput applications such as transport studies, tissue modeling, co-cultures, as well as migration and invasion assays.

Supplier: FACELLITATE

Ready-to-use for suspension and 3D cell culture. The BIOFLOAT™ 96-well plate provides a highly defined, fully inert, and cell-repelling surface.

Supplier: FACELLITATE

Ready-to-use for suspension and 3D cell culture. The BIOFLOAT™ 6-well plate provides a highly defined, fully inert, and cell-repelling surface.

Supplier: FACELLITATE

The BIOFLOAT™ 96-well plate outperforms existing products by its anti-adhesive properties.

Supplier: Greiner Bio-One

PS, sterile, with lid. Designed for use in air-lift culture where tissue is cultivated in permeable membrane supports (cell culture inserts), with the cell culture medium nourishing the cells from below the membrane and the air exerting its influence from above. If cell culture inserts and conventional cell culture plates are utilised in the air-lift culture, the available volume of culture medium is severely limited. This reduced volume results in an elevated nutrient consumption rate from the lower compartment and an increased number of medium changes.

Supplier: Corning

Elplasia plates enable researchers to generate high density of spheroids in a scaffold-free model. Use Corning Elplasia plates to generate, culture and analyse your spheroids all in a standard plate footprint.

Supplier: Greiner Bio-One

Clear PS housing with PET capillary pore membranes, cell culture surface treated, sterile. Combining six different membrane specifications (pore size and density) in geometries to fit 6,12 and 24 well plates, the ThinCert™ cell culture inserts are suitable for a wide range of applications including transportation, secretion and diffusion studies, migrational experiments, cytotoxicity testing, co cultures, Trans Epithelial Electric Resistance (TEER) measurements, as well as primary cell culture.

Supplier: FACELLITATE

The BIOFLOAT™ 24-well f-bottom plate provides a highly defined, fully inert, and cell-repelling surface.

Supplier: Corning

Clear PS, flat bottom, with lid. Available with a choice of surface treatments.

Supplier: FACELLITATE

The BIOFLOAT™ 96-well plate outperforms existing products by its anti-adhesive properties.

Supplier: Agilent

Filtration is simple, versatile, and necessary to prevent clogging of HPLC columns. Captiva's unique dual depth filtration media provides complete removal of precipitated proteins and outstanding resistance to sample clogging.

Supplier: Agilent

Captiva ND plates are a simple to use filtration device designed for the high throughput, automated, in-well protein precipitation, and these plates are designed to effectively remove phospholipids from biofluids.

Supplier: Merck

With Millicell inserts, attachment or suspension cells can access media from both their apical and basolateral sides. Cell growth, structure, and function more closely mimic what occurs in vivo. In addition, Millicell inserts make it possible to study both sides of the cell monolayer.

Supplier: VARIAN

Filtration is simple, versatile, and necessary to prevent clogging of valuable HPLC columns. Captiva 0,2 μm and 0,45 μm depth filter plates are ideal for filtering samples prior to LC/MS injection. Captiva 10 μm glass fibre filter plates are designed for clarifying highly particle-laden samples, such as freshly thawed plasma and hepatocyte filtration, preventing sample transfer problems from pipette tip clogging. They are perfect for automated systems and for use with DuoSeal 96 96-well seals.

Supplier: VARIAN

Faster than centrifugation and easily automated, Captiva's dual depth filtration media provide complete removal of precipitated proteins and outstanding resistance to sample clogging. The plates are also excellent for sample storage. All Captiva components are ultra clean, and rigorously tested to ensure against non specific binding.

Supplier: RATIOLAB

These plates conform fully to the highest requirements of PCR. They are made of polypropylene and are characterised by their very thin but uniform walls. In this way, optimal heat transfer in short cycle times is achieved. The smooth inside walls of the cavities minimise the binding of enzymes and nucleic acids.

Supplier: VARIAN

Capitiva ND^Lipids is as simple and easy-to-use as a standard protein precipitation plate. The non drip (ND) 96-well filtration plate is specially designed to effectively remove phospholipids from biofluids. Captiva ND^Lipidsremoves lipids, proteins, surfactants and other matrix interferences from plasma extracts. Ion suppression is significantly reduced for enhanced sensitivity and precision during trace analysis. The depletion of lipid
compounds also gives you better peak shapes and reproducible retention times so that standard operating procedures are easily validated. In addition, the fast, in-well precipitation technology of Captiva ND^Lipids ensures high sample throughput and helps reduce instrument downtime, with virtually no need for method development on a wide range of analytes.

Supplier: Greiner Bio-One

PP, non-sterile, without lid. The use of the 96-well format allows the scale up of basic PCR work, while the 384-well format is ideal for high throughput screening projects, such as the sequencing of complex genomes.

Supplier: Agilent

Solid Phase Extraction (SPE) plate, 96-round well plate, 1 ml, Bond Elut™ Plexa™ PCX, 30 mg

Supplier: Agilent

Solid Phase Extraction (SPE) plate, Bond Elut™ Plexa™ PAX, Plexa PAX, 10 mg

Supplier: Agilent

Solid Phase Extraction (SPE) plate, 96-round well plate, 1 ml, Bond Elut™ Plexa™, Plexa, 10 mg

Supplier: VARIAN

Solid Phase Extraction (SPE) plate, SPEC 96-well plate, Silica-based sorbents, 15 mg

Supplier: VARIAN

Unique bond Elut PBA silica sorbent uses phenylboronic acid functionality to retain analytes via a reversible covalent bond, with high specificity and cleanliness.

Supplier: SARSTEDT

Plate, PCR/qPCR, PP tubes, PC frame, Multiply®, PP/PC, Well colour: Clear, No. of wells: 96, Non-skirted, Profile: Standard

Supplier: VARIAN

Bond Elut C18 EWP uses a special silica with wide pores. This is endcapped.

Supplier: VARIAN

Solid Phase Extraction (SPE) plate, 96-round well plate, Bond Elut™, Silica sorbents (particle size 40 μm), C18, 100 mg

Supplier: VARIAN

VersaPlate allows you to process more samples in less time with less waste in a 96-well format.

Supplier: VARIAN

Bond Elut DEA (diethylaminopropyl) can be used as both a weak anion exchange sorbent with aqueous samples or as a polar sorbent with nonpolar organic matrixes.