You searched for: Respiratory Systems

Supplier: ILC DOVER

Installation tool is designed to assist installation of the breathing tube cover over the breathing tube with ease.

Supplier: 3M

The TR-970 Air Flow Indicator is used to confirm that the manufacturer's minimum design flow rate of the Versaflo™ TR-300 Series Powered Air Turbo is exceeded.

Supplier: 3M

The Versaflo™ Over-Visor Frame M-961 is a carrier frame designed to fit Versaflo™ Over-Visor M-967 and Versaflo™ radiant heat covers for Versaflo™ M-Series Helmets.

Supplier: 3M

The Versaflo™ Filter Cover TR-6500FC is a filter cover that helps to protect Versaflo™ TR-6580E filters from physical damage.

Supplier: JSP

Jetstream® is a belt-mounted rechargeable respirator with a large capacity disposable dust filter. Jetstream® delivers 180 L/min. of air through the filter via a highly flexible hose to the desired headtop.

Supplier: ILC DOVER

Disposable blower covers protect the Sentinel XE® blower from contamination.

Supplier: 3M

3M™ Versaflo™ S-400 series integrated suspension hood is a head cover with integrated head suspension which provides head, face, neck, and shoulder coverage. The hood can be used with 3M™ powered air respirators and supplied air respirator systems in a wide variety of applications.

Supplier: 3M

The Versaflo™ Backpack Adaptor TR-655 allows users to wear Versaflo™ Powered Air Turbo TR-600 or TR-800 unit on their back when used with Versaflo™ Backpack Harness BPK-01.

Supplier: 3M

The Versaflo™ Breathing Tube Radiant Heat Cover BT-927 is a radiant heat-resistant, highly durable breathing tube cover for 3M™ Versaflo™ BT-Series Breathing Tubes.

Supplier: 3M

The Versaflo™ Airflow Deflector M-116 is a replacement airflow deflector designed for use with 3M™ Versaflo™ M-100 and M-200 Series Headtops.

Supplier: ILC DOVER

With minimum length of 48 cm, this flexible breathing tube can be extended to 72 cm to accommodate a wide range of heights and movements.

Supplier: 3M

Versaflo™ Spark Arrestor TR-362 is an accessory designed to protect the filter and turbo in Versaflo™ Powered Air Turbo TR-300+.

Supplier: 3M

The Versaflo™ Size Reducing Ratchet Comfort Pad M-956 is a ratchet-style comfort pad that fits to the back of a 3M™ Versaflo™ M-Series Headtop to reduce the size of the headtop.

Supplier: JSP

Dust and half masks commonly fail to do the job they are intended to do because of poor fitting and care by the user. Qualitative Fit Testing can be used not only as a test method to ensure wearers are properly protected, but also as a very effective way of training them in the correct way of fitting a mask.

Supplier: 3M

Versaflo™ S-series hoods and headcovers feature adjustable suspensions (most models) and soft comfort pads that provide excellent fit, stability and tracking.

Supplier: 3M

The Versaflo™ Spark Arrestor TR-662 is a spark arrestor for Versaflo™ Powered Air Turbo TR-600 Series filters. It prevents damage from sparks and other hot, airborne particles.

Supplier: 3M

The Versaflo™ Heavy Duty Shroud M-448 is a high durability shroud for 3M™ Versaflo™ M-400 helmets. A 3M™ Versaflo™ Inner Collar (M-444) must be zipped into the outer shroud before use.

Supplier: 3M

The Versaflo™ Peel-Off Visor Cover for Premium Hoods is a transparent peel-off visor cover designed for use with Versaflo™ Series S-600, S-700, and S-800 premium head covers and hoods.

Supplier: 3M

The Versaflo™ Forehead Seal M-354 is a replacement forehead seal for use with 3M™ Versaflo™ M-300 Series Headtops.

Supplier: ILC DOVER

Charges Sentinel XE® LiPO rechargeable battery.

Supplier: 3M

Aircare™ Filtration Units provide high-quality air from an external source. Removing water and oil droplets, solid particles, and odors, as well as condensation and contaminants from facility supplied compressed air, air is filtered for up to three users operating any 3M™ Supplied Air Respirator Systems.

Supplier: ILC DOVER

The Sentinel XT® Clear Full Hood is a superior solution for protection in the pharmaceutical industry when compared to other PAPR masks and facepieces.

Supplier: 3M

The Versaflo™ Belts are specially designed to help users maintain comfort, and replace worn or damaged parts. These belts are designed for use with the Versaflo™ Powered Air Turbo TR-300+.

Supplier: ILC DOVER

Easy to clean waist belt quickly and securely snaps into the ergonomically designed Sentinel® blowers for hands-free operation.

Supplier: 3M

Versaflo™ S Series Peel-Off Visor Covers are transparent, peel-off visor covers designed for use with Versaflo™ Series S-133, S-333, S-433, and S-533 head covers and hoods. This self-adhesive cover protects the visor from contaminants and scratches.

Supplier: 3M

The Versaflo™ Filter Cover TR-6100FC is a filter cover to help protect Versaflo™ TR-6110E and TR-6130E filters from physical damage.

Supplier: 3M

The Versaflo™ Breathing Tube BT-64 is a heavy-duty breathing tube. It connects approved tight fitting facepieces to powered air delivery units to ensure that clean air reaches the facepieces with unrestricted airflow.

Supplier: 3M

The Versaflo™ Peel-Off Visor Cover M-928 is an easy-to-use, transparent, self-adhesive visor cover designed to protect 3M™ Versaflo™ M-Series Headtop visors from scratches and overspray of paint or chemicals.

Supplier: 3M

The Versaflo™ Cleaning and Storage Kit TR-653 is designed to assist with safely cleaning and storing the Versaflo™ Powered Air Turbo TR-600 and TR-800 Series. It comes with one inlet plug and two inlet seals, one outlet plug and two outlet seals, and one battery connector cover.

Supplier: 3M

The Versaflo™ Air Duct Sealing Ring S-956 is a spare air duct sealing ring designed to replace worn or damaged parts in Versaflo™ S-Series Premium S-950 Head Suspension.