You searched for: Petroleum Industry Standards
Developed to facilitate successful international trades, petroleum industry standards evaluate the properties of naturally occurring energy resources. Whether testing in refineries, processing plants, or production sites, the solutions ensure compliance requirements are always met. The liquids serve as the technical basis for safety level regulations and mitigating equipment failure risks. By enhancing operational excellence in machinery, the high quality petroleum industry standards inherently reduce any environmental impact and consumer costs.
Extraction retention time standard, (4 components)
Supplier: Restek
This contains n-hexane (C6), n-decane (C10), n-docosane (C22) and n-dotriacontane (C32).
Expand 1 Items
Kerosene (ASTM Class 4 accelerant)
Supplier: Restek
These solutions are prepared from a single-source (one-refinery) product.
Expand 4 Items
Reference materials, acid number standards, total acid number (TAN)
Supplier: LGC Standards PROMOCHEM
Acid number reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 2 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
CA WIP VOA standard (11 components)
Supplier: Restek
For monitoring samples suspected of gasoline contamination requires laboratories to calibrate and report these compounds.
Expand 1 Items
Coal fly ash - constituents
Supplier: LGC Standards PROMOCHEM
These reference standard is intended for use in the evaluation of analytical methods used for the classification of coal fly ash and for the determination of constituent elements in coal fly ash or materials of a similar matrix.
Expand 3 Items
Unleaded gasolines (ASTM Class 2 Accelerant)
Supplier: Restek
The weathered materials indicate the percent weight loss from the original material. Prepared from a single source (one refinery) product.
Expand 5 Items
Test mix E1618 (13 components)
Supplier: Restek
Components in this mix (0,5 μl/ml or 0,05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.
Expand 1 Items
Michigan GRO mix (14 components)
Supplier: Restek
It consists of benzene, 1,2-dibromoethane, 1,2-dichloroethane, ethylbenzene, isopropylbenzene (cumene), 2-methylnaphthalene, methyl tert-butyl-ether (MTBE), naphthalene, toluene, 1,2,4-trimethylbenzene, 1,3,5-trimethylbenzene, m-xylene, o-xylene and p-xylene.
Expand 1 Items
Fuel oil degradation mix (4 components)
Supplier: Restek
Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane. To assist in identifying these four compounds from the complex fuel oil analysis, Restek offer a product that contains these compounds for retention time determination.
Expand 1 Items
WA EPH fractionation check mix (22 components)
Supplier: Restek
The mix consists of, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C34) n-tetratriacontane, acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.
Expand 1 Items
Hydraulic oil standard
Supplier: Restek
This is for total petroleum hydrocarbon pattern recognition of hydraulic oil.
Expand 1 Items
Diesel surrogate and internal standards
Supplier: Restek
o-terphenyl, 2000 μg/ml in acetone, 1 ml/ampule, for internal standard
Expand 5 Items
Residual range calibration verification standard (CVS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
DHA PiONA standard (133 components)
Supplier: Restek
This standard is produced for refineries performing Detailed Hydrocarbon Analysis (DHA) of crude oil feedstocks and fuels.
Expand 1 Items
Stoddard solvent standard
Supplier: Restek
Stoddard solvent, a petroleum distillate mixture of C7-C12 hydrocarbons, consists of three major groups of components: linear and branched alkanes-also known as paraffins (30 to 50%); cycloalkanes-also called cycloparaffins or naphthenes (30 to 40%); and aromatic hydrocarbons (10 to 20%).
Expand 1 Items
Alternate boiling point/carbon number distribution marker stock standard (9 components)
Supplier: Restek
The mix consists of (C6) n-hexane, (C8) n-octane, (C10) n-decane, (C12) n-dodecane, (C16) n-hexadecane, (C21) n-heneicosane, (C28) n-octacosane, (C35) n-pentatriacontane, (C36) n-hexatriacontane.
Expand 1 Items
Creosote oil standard
Supplier: Restek
This is for total petroleum hydrocarbon pattern recognition of creosote oil.
Expand 1 Items
Reference standard, water saturated octanol, NIST
Supplier: LGC Standards PROMOCHEM
NIST-2890, water saturated octanol, NIST
Expand 1 Items
Elemental analysis standards, custom blend S-21+K, CONOSTAN
Supplier: LGC Standards PROMOCHEM
Custom blend S-21+K, CONOSTAN®, 885 ppm
Expand 1 Items
JP-8 military fuel standard
Supplier: Restek
JP-8 military fuel standard, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
Motor oil composite standard
Supplier: Restek
Motor oil composite, 50000 μg/ml in methylene chloride, Pk Info: 1 ml/ampoule
Expand 1 Items
Biodiesel calibration standards
Supplier: Restek
The biodiesel component is methyl soyate.
Expand 8 Items
MA VPH surrogate standard (2,5-dibromotoluene)
Supplier: Restek
2,5-Dibromotoluene, 10000 µg/ml in P and T methanol, Pk Info: 1 ml/ampoule
Expand 1 Items
Reference materials, cloud point reference, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in accordance with ASTM D2500 for the determination of the cloud point of petroleum products. The cloud point of a petroleum product is an index of the lowest temperature of their utility for certain applications.
Expand 1 Items
Residual range calibration standard (RCS)
Supplier: Restek
SAE30 motor oil:SAE40 motor oil (1:1).
Expand 1 Items
Reference materials, acid number standards, in hydrocarbon oil, VHG
Supplier: LGC Standards PROMOCHEM
These reference materials are intended for use in the determination of acid number (AN) in petroleum products in accordance with ASTM D664/IP 177 (by potentiometric titration) or ASTM D974 (by colour-indicator titration).
Expand 1 Items
JP-4 military fuel standards
Supplier: Restek
Certified reference materials (CRMs) manufactured and QC-tested in ISO-accredited labs satisfies ISO requirements.
Expand 3 Items
Certified PAHs in diesel
Supplier: Restek
The mix consists of, acenaphthene, 2-methylnaphthalene, acenaphthylene, fluorene, naphthalene, 1-methylnaphthalene and phenanthrene.
Expand 1 Items
TX TPH matrix spike mix (2 components)
Supplier: Restek
The mix consists of diesel fuel #2 composite, unleaded gasoline composite.
Expand 1 Items
Kerosene composite standards
Supplier: Restek
Kerosene composite standards are comprised of three separate sources blended in equal portions. It may exhibit lot-to-lot variation.
Expand 3 Items
Supplier: GRANT INSTRUMENTS
Supplier: BOCHEM
Supplier: VWR Collection
Supplier: OMEGA BIO-TEK
Supplier: DWK Life Sciences
Supplier: Thermo Fisher Scientific
Supplier: VWR Collection
Supplier: Oxford Nanopore Technologies
Supplier: Industrial Physics
Supplier: AAT Bioquest
Supplier: Integra
Supplier: Palbam
Supplier: VWR Collection
Supplier: Integra
Supplier: VWR Collection
Supplier: FACELLITATE
Supplier: NANOENTEK
Supplier: Greiner Bio-One