You searched for: Organic Standards

Supplier: Restek

This designed for the determination of the individual hydrocarbons present in spark ignition engine fuels, as well as fuel blends containing oxygenates such as methyl tert-butyl ether, ethyl tert-butyl ether, tert-butanol and ethanol.

Supplier: Restek

SV Calibration mix #4 contains carbazole (86-74-8); dibenzofuran (132-64-9); diethyl phthalate (84-66-2); 2,4-dinitrotoluene (121-14-2); 2,6-dinitrotoluene (606-20-2); hexachlorobenzene (118-74-1); hexachlorobutadiene (87-68-3); hexachlorocyclopentadiene (77-47-4); hexachloroethane (67-72-1); isophorone (78-59-1); 2-methylnaphthalene (91-57-6); nitrobenzene (98-95-3); 1,2,4-trichlorobenzene (120-82-1).

Supplier: Restek

Routine analysis using this mix can assist in determining the need to perform column and/or system maintenance.

Supplier: Restek

The european pharmacopoeia/ICH Class 2 mix C consists of six components, they are 2-ethoxyethanol (160 μg/ml), ethylene glycol (620 μg/ml), formamide (220 μg/ml), 2-methoxyethanol (methyl cellosolve) (50 μg/ml), n-methylpyrrolidone (4,840 μg/m)l and sulpholane (160 μg/m)l.

Supplier: Restek

A pure, quantitative chloroprene solution, specially stabilised in purge-and-trap grade methanol to allow dilutions for working standards in unmodified purge-and-trap methanol. the entire preparation procedure is performed under carefully monitored conditions to prevent any contamination or polymerisation of the highly reactive, neat chloroprene.

Supplier: Restek

Mix contains: 1-Bromo-4-fluorobenzene (BFB) (460-00-4), 1,2-Dichloroethane-d4 (17060-07-0) and Toluene-d8 (2037-26-5).

Supplier: Restek

Contains six components, those are carboxin, diazinon, disulfoton, fenamiphos, merphos and terbufos.

Supplier: Restek

The mix consists of benzyl butyl phthalate, bis(2-ethylhexyl)adipate, bis(2-ethylhexyl)phthalate, di-n-butylphthalate, diethylphthalate, dimethylphthalate, di-n-octyl phthalate.

Supplier: Restek

Mix Contains: Carbon disulphide (75-15-0); Chloroacetonitrile (107-14-2); 1-Chlorobutane (Butyl chloride) (109-69-3); trans-1,4-Dichloro-2-butene (110-57-6); 1,1-Dichloro-2-propanone (513-88-2); Diethyl ether (ethyl ether) (60-29-7); Hexachloroethane (67-72-1); Iodomethane (methyl iodide) (74-88-4); Methacrylonitrile (126-98-7); Methyl tert-butyl ether (MTBE) (1634-04-4); 2-Nitropropane (79-46-9); Propionitrile (107-12-0).

Supplier: Restek

The mix consists of chloroform (60 μg/ml), 1,4-dioxane (380 μg/ml), methylene chloride (dichloromethane) (600 μg/ml) and trichloroethene (80 μg/ml).

Supplier: Restek

This standard is a qualitative mixture of various gasoline and refinery materials prepared to provide nearly every component that may be encountered in feedstock and finished gasolines. Some oxygenates have been added to allow this blend to be used by refineries for detailed hydrocarbon analysis (DHA) method setup and to fulfill requirements.

Supplier: Restek

Consists of 11 components, those are chlorobenzilate, cis-chlordane, trans-chlordane, chloroneb, dcpa methyl ester , etridiazole, hexachlorobenzene, cis-permethrin*, trans-permethrin*, propachlor and trifluralin.

Supplier: Restek

The mix consists of, bromochloroacetic acid (400 μg/ml), bromodichloroacetic acid (400 μg/ml), chlorodibromoacetic acid (1000 μg/ml), dibromoacetic acid (200 μg/ml), dichloroacetic acid (600 μg/ml), monobromoacetic acid (400 μg/ml), monochloroacetic acid (600 μg/ml), tribromoacetic acid (2000 μg/ml), trichloroacetic acid (200 μg/ml)

Supplier: Restek

Consists of eight components, those are acifluorfen, bentazon, chloramben, 2,4-d, dicamba, dichlorprop, picloram and 2,4,5-tp.

Supplier: Restek

This OLC 03.2 is an analytical method for the detection of low-concentration volatile, semivolatile, and pesticide/Aroclor organics in aqueous samples using deuterated monitoring compounds (DMCs) as sample-by-sample accuracy indicators.

Supplier: Restek

Mix contains: Benzene (71-43-2), Carbon disulfide (75-15-0), Ethylbenzene (100-41-4), Toluene (108-88-3), vinyl acetate (108-05-4), o-Xylene (95-47-6), p-Xylene (106-42-3).

Supplier: Restek

Mix contains Acifluorfen methyl ester, Bentazon methyl ester, Chloramben methyl ester, Dalapon methyl ester, 2,4-D methyl ester, 2,4-DB methyl ester, DCPA methyl ester (Chlorthal-dimethyl), Dicamba methyl ester, 3,5-Dichlorobenzoic acid methyl ester, Dichlorprop methyl ester, Dinoseb methyl ether, Pentachloroanisole, Picloram methyl ester, Quinclorac methyl ester, 2,4,5-T methyl ester, 2,4,5-TP.

Supplier: Restek

This kit contains 1 ml of each of these mixtures 608 calibration mix, Aroclor 1016, Aroclor 1221, Aroclor 1232, Aroclor 1242, Aroclor 1248, Aroclor 1254, Aroclor 1260, toxaphene, chlordane.

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: USP

USP Reference Standards are specified for use in conducting official USP–NF tests and assays. USP also provides Reference Standards specified in the Food Chemicals Codex as well as authentic substances—high-quality chemical samples—as a service to analytical, clinical, pharmaceutical and research laboratories. To confirm accuracy and reproducibility, USP Reference Standards are rigorously tested and evaluated by multiple independent laboratories including USP, commercial, regulatory, and academic labs. USP also provide publicly available, official documentary standards for pharmaceutical ingredients in the USP–NF that link directly with our primary reference standards.

Supplier: Restek

Mix contains: Acenaphthene (83-32-9); Acenaphthylene (208-96-8); Anthracene (120-12-7); Benz(a)anthracene (56-55-3); Benzo(a)pyrene (50-32-8); Benzo(b)fluoranthene (205-99-2); Benzo(k)fluoranthene (207-08-9); Benzo(ghi)perylene (191-24-2); Chrysene (218-01-9); Dibenz(a,h)anthracene (53-70-3); Fluoranthene (206-44-0); Fluorene (86-73-7); Indeno(1,2,3-cd)pyrene (193-39-5); 2-Methylnaphthalene (91-57-6); Naphthalene (91-20-3); Phenanthrene (85-01-8); Pyrene (129-00-0); 1,2,3-Trimethylbenzene (526-73-8).

Supplier: Restek

The european pharmacopoeia/ICH Class 2 mix B, revised consists of 10 components, they are acetonitrile (410 μg/ml), chloroform (60 μg/ml), 1,2-dimethoxyethane (100 μg/ml), N,N-dimethylacetamide (1,090 μg/ml), 1,4-dioxane (380 μg/ml), 2-hexanone (50 μg/ml), methanol (3,000 μg/ml), nitromethane (50 μg/ml), pyridine (200 μg/ml) and tetralin (100 μg/ml).

Supplier: Restek

Contains 1 ml each of these mixtures: 524 calibration mix #7A, 524 calibration mix #7B. calibration mix #7A contains Acetone (67-64-1), 2-Butanone (MEK) (78-93-3), 2-Hexanone (591-78-6), 4-Methyl-2-pentanone (MIBK) (108-10-1), Tetrahydrofuran (109-99-9); calibration mix #7B contains Acrylonitrile (107-13-1)
Allyl chloride (3-chloropropene) (107-05-1), Ethyl methacrylate (97-63-2), Methyl acrylate (96-33-3), Methyl methacrylate (80-62-6), Nitrobenzene (98-95-3), Pentachloroethane (76-01-7).

Supplier: Restek

The mix consists of, 3,5-dinitroaniline, nitrobenzene, nitroglycerin, 2-nitrotoluene, 3-nitrotoluene, 4-nitrotoluene, PETN.

Supplier: Restek

The mix consists of, 2-amino-4,6-dinitrotoluene, 4-amino-2,6-dinitrotoluene, 1,3-dinitrobenzene, 2,4-dinitrotoluene, 2,6-dinitrotoluene, HMX, RDX, tetryl, 1,3,5-trinitrobenzene, 2,4,6-trinitrotoluene.

Supplier: Restek

sv calibration mix #6 contains aldrin, α-bhc, β-bhc, δ-bhc, γ-bhc (lindane), 4,4'-DDD, 4,4'-DDE, 4,4'-DDT, dieldrin, endosulphan I, endosulphan II, endosulphan sulphate, endrin, endrin aldehyde, endrin ketone, heptachlor, heptachlor epoxide (isomer B), methoxychlor.

Supplier: Restek

The mix consists of, 3,5-dinitroaniline, nitrobenzene, nitroglycerin, 2-nitrotoluene, 3-nitrotoluene, 4-nitrotoluene, PETN.

Supplier: Restek

Used during initial sample screening to determine retention time windows for each petroleum product.

Supplier: Restek

SV calibration mix contains acenaphthene, acenaphthylene, anthracene, benz(a)anthracene, benzo(a)pyrene, benzo(b)fluoranthene, benzo(k)fluoranthene, benzo(ghi)perylene, chrysene, dibenz(a,h)anthracene, fluoranthene, fluorene, indeno(1,2,3-cd)pyrene, naphthalene, phenanthrene, pyrene.

Supplier: Restek

This phenol calibration mix contain 12 components: 4-Chloro-3-methylphenol, 2-Chlorophenol, 2,4-Dichlorophenol, 2,4-Dimethylphenol, 4,6-Dinitro-2-methylphenol (Dinitro-o-cresol), 2,4-Dinitrophenol, 2-Methylphenol (o-cresol), 2-Nitrophenol, 4-Nitrophenol, Pentachlorophenol, Phenol and 2,4,6-Trichlorophenol.