171 Results for: "dissipating"

Supplier: DESCO

These facemasks constructed of a lightweight dissipative material which is made from texturised polyester and a minimum of 9% carbon nylon monofiliment.

Supplier: DESCO

Statguard® Static Dissipative Cross-Linked Floor Finish is used to dissipate static charges as well as prevent triboelectric (static charge generation) charges while providing a clear, high gloss finish that resists wear. It meets EN 61340-5-1 ESD Floors Table 1 RG less than or equal to 1x10E9 ohms.

Supplier: Brady

Static dissipative polyimide (B-718) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Bohlender

Static dissipative sieve for funnel 130

Supplier: DESCO

Dissipative Document Wallets are rigid dissipative, low charging antistatic document vinyl wallets with self-adhesive backing are designed for use within ESD Protected Areas (EPA). Unprotected documents could hold electrostatic charges that may cause damage to electrostatic sensitive devices (ESDS).

Supplier: Bohlender

Funnel made of PE or static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with filling neck.

Supplier: Bohlender

Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.

Supplier: Brady

Static dissipative polyimide (B-717) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Brady

This B-473 material is a low profile polyimide and polyester material that has static dissipative properties.

Supplier: Brady

Static Dissipative Polyimide (B-717) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Bohlender

Screw cap for canister thread, freely turnable spout tube, rigid or flexible design with integrated safety aeration for constant flow.

Supplier: Ansell

Ansell's first disposable static dissipative gloves reduce risk of fire, explosion, or damage caused by electrostatic discharge.

Supplier: Bohlender

Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.

Supplier: Bohlender

For vertical installation of b.safe funnels 130/180 on canister with inclined connectors and S60 thread. The insert made of static dissipative PE-EX is freely turnable inside the S60 screw cap (PPS) and thus allows vertical alignment of the funnel on the canister.

Supplier: Brady

Static Dissipative Polyimide (B-718) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Bohlender

Canister with thread S90 (DIN90) for the collection of liquid waste. Canister S90 in PE-EX with transparent stripe for observing the fill level.

Supplier: Bohlender

Canister with S60/61 thread (DIN60/61) for the collection of liquid waste.

Supplier: Brady

This B-473 material is a low profile polyimide and polyester material that has static dissipative properties.

Supplier: Bohlender

b.safe funnels with level control are made of electrically conductive dissipative PE-EX and suitable for use with flammable liquids. Electrically conductive waste canisters are usually black and therefore the filling volume is not visible. This is where the funnel with fill level control comes in.

Supplier: Bohlender

Canister with S60/61 thread (DIN 60/61) for the collection of liquid waste with integrated indicator to monitor the level.

Supplier: Brady

Static Dissipative Polyimide (B-717) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Brady

Static Dissipative Polyimide (B-718) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: Palbam

Bench top N₂ purge desiccator cabinets made from stainless steel 304, units have an electropolished finish and static dissipative PVC window. Cabinets cut nitrogen expenses by up to 80%, automate clean, dry benchtop storage eliminating moisture & oxygen related degradation and optimise yields. An appropriate flow of nitrogen is introduced into the upper section of the desiccator; the heavier air is then purged out of the bottom. Ideal for use with semiconductor components, biological and pharmaceutical samples, and other sensitive materials. Fully integrated turnkey system takes 30 s to install.

Supplier: Palbam

Pass Through cabinet allows products and materials to be transferred between different rooms. Reduces unnecessary walking and entering/exiting cleanroom.

Supplier: Brady

Static Dissipative Polyimide (B-719) withstands wave solder environments and multiple harsh washes for printed circuit board and electronic component preprocess labelling.

Supplier: DuPont

Tychem® 6000 F overalls are made from a lightweight and durable fabric (<500 g per garment) consisting of a proprietary barrier film laminated to a heavy duty Tyvek® substrate. They offer excellent chemical permeation protection to an extensive range of chemicals, helping to protect personnel against numerous toxic industrial organic chemicals, highly concentrated inorganic chemicals (even under pressure), particulates, biohazards and certain chemical warfare agents.

Supplier: CONTEC

This static-safe swab consists of a pointed-tip sealed foam head attached to a conductive polymer handle.

Supplier: 3M

Oil adsorbent sheets or pads on a roll for spill control.

Supplier: DuPont

Air-fed coverall with attached non-dissipative under gloves and over boot assembly, consisting of integrated dissipative inner boots attached to dissipative outer boots.

Supplier: Bohlender

Made of static dissipative PE-EX.