620 Results for: "VICI JOUR RESEARCH"

Supplier: VICI JOUR RESEARCH

PEEK one-piece fingertight fittings. Work with all ¹/₁₆'' OD tubings and female 10 to 32 ports. They are rated to 350 bar and can be used with virtually any HPLC fittings, eg. Swagelok, Parker, Rheodyne, Valco.

Supplier: VICI JOUR RESEARCH

ETFE.

Supplier: VICI JOUR RESEARCH

Cutter for cutting PTFE, PEEK and other polymeric tubing.

Supplier: VICI JOUR RESEARCH

FEP, natural or coloured.

Supplier: VICI JOUR RESEARCH

PEEK tubing has the strength required to withstand continuous use at HPLC pressure without swelling or bursting, and is not affected by halide salts, high strength buffers, or other aggressive mobile phases that corrode stainless steel.

Supplier: VICI JOUR RESEARCH

These fittings are designed for capillary LC, used in HTS techniques, proteomics, genomics, and other newer developments in industrial research requiring small sample size for reduction of analysis time, fittings and unions are easy to handle.

Supplier: VICI JOUR RESEARCH

Precolumn filter kit has a standard 10 to 32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: VICI JOUR RESEARCH

Unions for easy connection of low pressure solvent lines.

Supplier: VICI JOUR RESEARCH

These disposable in-line filters offer an easy and cost-effective way to protect valuable columns against particles.

Supplier: VICI JOUR RESEARCH

For opening and tightening ¹/₄'' nuts.

Supplier: VICI JOUR RESEARCH

These stainless steel 316 sample loops are cut using an electrolytic cutting process followed by ultrasonic and high pressure steam cleaning to remove contaminants, dried and capped with softener free caps to avoid the recontamination of the tubing.

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool for flanged fittings is suitable for PTFE and PTFE-like tubing with O.Ø. between ¹/₁₆ and ¹/₈".

Supplier: VICI JOUR RESEARCH

The in-line PEEK guard cartridges extend the life of analytical columns by trapping contaminants from the sample and mobile phase, thereby preventing loss of retention. Only PEEK and titanium contacts the mobile phase and sample. This system is ideal for use with proteins or other biopolymers that may be contaminated or absorbed by steel surfaces.

Supplier: VICI JOUR RESEARCH

This is a convenient small device to keep the solvent line in the solvent.

Supplier: VICI JOUR RESEARCH

With flat filter element which allows the maximum amount of mobile phase to be drawn from the reservoir without introducing air into the system.

Supplier: VICI JOUR RESEARCH

The No-Met polyethylene filter is designed for applications involving the separation of biomolecules, with inert polymeric fittings for 1/8" tubing and a 20 µm filter effectively eliminating metal contamination from the fluid path.

Supplier: VICI JOUR RESEARCH

Frits made of stainless steel with extra-low carbon content.

Supplier: VICI JOUR RESEARCH

The stainless steel in-line filter has virtually no dead volume and can be used in various applications without significant band broadening or loss of efficiency. This version is intended for analytical use between the autosampler injection valve and the column.

Supplier: VICI JOUR RESEARCH

PPS hex-head nut, for flange/washer connections, for 1/16" O.Ø tubing or 1/4"–28 flat bottom ports, PPS

Supplier: VICI JOUR RESEARCH

These nylon column end plugs fit all columns with 10-32 threads. The long design and threading down to the ferrule ensure safe closing of valuable columns.

Supplier: VICI JOUR RESEARCH

Biocompatible PEEK construction. The unique feature of the VICI Jour® column coupler is that it adjusts to fit all 10-32 fitting types. No matter what the fitting type and pilot length – Valco®, Waters®, Upchurch®, Rheodyne®, etc., the coupler adapts to bottom out in the pilot automatically, consequently creating only small void volumes.

Supplier: VICI JOUR RESEARCH

This regulator installs on the detector drain line and prevents bubble formation in the flow cell during outgassing. It has an adjustable back pressure from 0 to 20 bar (15 to 300 psi) without disconnecting from the system. Other sizes available.

Supplier: VICI JOUR RESEARCH

This safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

The air inlet valve has a check valve which blocks vapours of the solution in a bottle, preventing the vapours from escaping into the lab. The safety air outlet filter regulates the pressure during helium sparging.

Supplier: VICI JOUR RESEARCH

The Easy-Flange flange-rolling tool has been developed for flanging all PTFE and PTFE-like tubes with Ext.Ø between ¹/₁₆' and ¹/₈' where fittings requiring a flange.

Supplier: VICI JOUR RESEARCH

These PTFE tubings are biocompatible, chemically inert and suitable for lower or mild pressure applications.

Supplier: VICI JOUR RESEARCH

PTFE.

Supplier: VICI JOUR RESEARCH

Stainless steel with PE caps and colour coded sleeves.

Supplier: VICI JOUR RESEARCH

PEEK flangeless nuts in combination with the inverted ferrule do not require flanging tools. A hand tightening procedure makes leak free seals. The inert ETFE ferrule is the only part, besides the tubing, which is in contact with the fluid, the nut is never in contact with the fluid stream.

Supplier: VICI JOUR RESEARCH

One-piece hex-head fittings made from PEEK are easy to use with the ValvTool and the Color-It Color-Coded Fingertight adapters. The 10-32 thread is suitable for standard high-pressure female connections. They are available both in a short and long version.