Supplier: Sartorius

Stainless steel filter holder designed for particle removal and sterile filtration. The supplied unscrewable hose nipples can be replaced by G3/8 connectors.

Supplier: Sartorius

Elimination of particles from samples prior to HPLC or other chromatographic analysis is essential in order to maintain the integrity of the chromatography column and to maximise its operating life time. Minisart® syringe filters optimised for sample preparation consist of a polypropylene (PP) housing and membrane components featuring maximum chemical compatibility and minimum extractables to ensure excellent results. Due to the typical range of volumes from less than 1 ml to 100 ml these filters are available in three different diameters with an effective filtration area of 0,12, 1,7 and 4,8 cm².

Supplier: Sartorius

Rechargeable, cordless and lightweight, the Midi Plus™ pipette controller can be used with all plastic, glass and Pasteur-type pipettes between 1 and 100 ml, and with tips for Sartorius Proline® 5 and 10 ml pipettes.

Supplier: Sartorius

arium® mini UV Lamp (185 | 254 nm)

Supplier: Sartorius

These filter tips have more space between the sample and the filter than conventional filter tips. This virtually eliminates the risk of an expensive or a contagious sample permeating the filter.

Supplier: Sartorius

When the pipette is not in use, it should be stored in an upright position in order to avoid contamination from desks and benches.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Sartorius

These filter papers are made of 100% cotton linters. They are guaranteed to be free of any residual acids and they have an extremely low percentage of ash content. As a result, these filters are virtually ash-free. All Sartorius ashless filter papers are characterised by high wet strength and high purity and are therefore especially suitable for quantitative analysis, Büchner funnels, pressure or vacuum filtration.

Supplier: Sartorius

The Arium® cleaning solution is used to effectively remove impurities that can built up over time during water treatment.

Supplier: Sartorius

The LabSorb protection papers are highly absorptive papers coated on one side with polyethylene.

Supplier: Sartorius

Cellulose nitrate hydrophilic membrane filters. For sample pretreatment, particle testing and chemotaxis.

Supplier: Sartorius

Vivaspin® 6 centrifugal concentrators have been developed to offer increased volume flexibility and performance. Vivaspin® 6 can process 6 ml in either swing bucket or fixed angle rotors accepting standard 15 ml conical bottom test tubes.

Supplier: Sartorius

BioSart® 100 monitors have been specifically designed for the detection and enumeration of microorganisms in beverages, water, pharmaceuticals, cosmetics, foods and other liquids. These sterile devices with PS housing and incorporated membrane filter and cellulose pad are ready to use.

Supplier: Sartorius

The FlexiBulk concept combines the low cost of bulk tips with saving space, improving usability and securing tip purity.

Supplier: Sartorius

PP housing.

Supplier: Sartorius

Binder free glass microfibre filters are made of 100% borosilicate, are highly pure and extremely white. They are recommended for analytical and gravimetric analyses and also as prefilters. These filters combine fast flow rates with high load capacity and the retention of very fine particles.

Supplier: Sartorius

Ideal for general purpose laboratory concentration or purification prior to further analysis, Vivapore is particularly suited for labile solutions that can denature with alternative shear or pressure inducing methods or that require processing in a cold room environment.

Supplier: Sartorius

Venting filters with hydrophobic reinforcened PTFE membrane and PP housing.

Supplier: Sartorius

The arium® CellPlus is a sterile packed, point-of-use ultrafilter for efficient removal of endotoxins, RNase, DNase, microorganisms and particles. Retrograde contamination is prevented by the protective bell design made up of polycarbonate. It offers high safety for critical cell culture applications.

Supplier: Sartorius

Ready to use units which, attached to a membrane pump or tube pump, quickly and reliably sterilise 100 to 10000 ml of media and aqueous solutions.

Supplier: Sartorius

Regenerated cellulose hydrophilic membrane filters. For filtration of organic solvents. Suitable for particle removal from aqueous solutions and solvents. Low adsorption.

Supplier: Sartorius

This pipette stand holds pipettes in an upright position while not in use to avoid contamination from benches and tables. Designed for all Sartorius mechanical and electronic pipettes, particularly for mLINE®, Proline® Plus and Proline® mechanical devices. Also compatible with other brands.

Supplier: Sartorius

These filter forceps are made of high grade stainless steel.

Supplier: Sartorius

Each set consists of a Ø 50 mm or Ø 47 mm pad, impregnated with nutrient media, packed dry and sterile in a Petri dish, with a membrane filter. After filtration of the sample the membrane is placed in the dish and incubated. More types available on request.

Supplier: Sartorius

Minisart® NML with surfactant-free cellulose acetate (SFCA) is the best choice for all aqueous solutions and oils with a pH of 4 - 8. With a pore size of 0,2 µm that can be used for sterile filtration and has a male luer lock outlet. Only available in the EU/EEA and registered countries

Supplier: Sartorius

Membrane adsorber units with ion exchange membranes (stabilised reinforced cellulose) are ideal for capturing of large proteins and viruses as no size exclusion effects can be observed.

Supplier: Sartorius

Filter holder, O-ring, Viton

Supplier: Sartorius

mLINE® pipettes offer a unique combination of new features for higher accuracy and precision. They include built-in replaceable tip cone filters, which prevent pipette contamination and damage.

Supplier: Sartorius

For filtration of protein containing solutions. Compatible with aqueous solutions of pH 4 to 8 and most alcohols and hydrocarbons.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.