1122 Results for: "LABCONCO"

Supplier: LABCONCO

Kjeldahl distillation units are designed with mounting on a base cabinet or table. One-piece borosilicate glass connecting bulbs separate liquid from vapors prior to the vapors entering the condenser and effectively traps caustic mist that may carry over to the recovery solution and One-piece borosilicate glass delivery tubes with long necks, round bottoms and thick walls to help eliminate pressure fluctuations in the distillation phase.

Supplier: LABCONCO

These systems use vacuum along with heat and vortex motion to help speed evaporation and provide an alternative to traditional centrifugal evaporation methods. The systems may be used with a broad range of aggressive chemicals. Heat is supplied by a dry block heating system that, unlike water baths, adds no potential source of contamination and requires no maintenance.

Supplier: LABCONCO

Safely transports heavy instruments and bulky equipment. Holds up to 181 kg. Welded frame is constructed of rugged, 18-gauge glacier white epoxy-coated 2,5 cm square tubular steel.

Supplier: LABCONCO

The CentriVap micro IR vacuum concentrator has a very small footprint and therefore fits in tight spaces. It is ideal for small samples such as DNA and small throughput in molecular biology, proteomics, genomics, genetics, cell biology and drug discovery labs.

Supplier: LABCONCO

Combine the separate concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 17 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump - the only additional component necessary to begin processing.

Supplier: LABCONCO

Vacuum diaphragm pump, Vacuum controller

Supplier: LABCONCO

An efficient, automatic evaporator system which can be used with a broad range of aggressive chemicals. In RapidVap N₂ systems, a stream of nitrogen or dry gas is directed downward onto the surface of the sample. Nitrogen blow-down reduces the partial pressure directly over the liquid to speed evaporation and help remove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 or all 8 tube locations. Vortex motion and dry heat may also be applied to further accelerate processing.

Supplier: LABCONCO

Benchtop freeze drying system, type 304 stainless steel with 12 ports, -75 °C. Ideal for the laboratory with occasional lyophilisation requirements, the Dry Ice Benchtop Freeze Dry System provides a simple, economical means of freeze-drying. It is equipped with a center well for dry ice and solvent that serves as a water vapour collector and doubles as a convenient pre-freezing bath. Flasks, serum bottles and ampules may be frozen by dipping and rotating them in the well. Chamber size 248 x222 mm

Supplier: LABCONCO

Weathercaps are constructed of strong, corrosion-resistant PVC.

Supplier: LABCONCO

Purifier Logic+ Class II Type A2 Biosafety Cabinets are suitable for work with agents that require Biosafety Level 1, 2 or 3 containment.

Supplier: LABCONCO

Produce up to 350 liters per minute of pure nitrogen.

Supplier: LABCONCO

Heated product shelf chambers with valves.

Supplier: LABCONCO

This combination glove box with fibreglass lining provides inlet and outlet HEPA or ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment.

Supplier: LABCONCO

8-port manifold, W×D×H: 218×218×399 mm

Supplier: LABCONCO

Evaporator, centrifugal, Solid phase tubes with 1,5 ml stem, 170 ml capacity

Supplier: LABCONCO

PuriCare Procedure Stations with a large sash opening create a particulate-free environment for small animal research activities such as cage changing, weighing, anesthesia delivery and surgical procedures.

Supplier: LABCONCO

Scroll Vacuum Pumps are low maintenence, corrosion resistent pumps that require no oil.

Supplier: LABCONCO

Accessory for Freeze Dryer

Supplier: LABCONCO

The FreeZone® Triad™ freeze drying system is an all inclusive bench top lyophiliser for 4 samples on the left side and stoppering tray dryer processing shelf. The processing shelf holds up to 441×3 ml serum bottles and the four valves hold samples in flasks, serum bottles or ampoules. Samples for both types of freeze drying can be run at once. The chamber pre-freezes samples to save money and time, eliminating the need for a separate freezer and product transfer.

Supplier: LABCONCO

Designed to handle the lyophilisation needs of research laboratories. Collectors that reach −50 °C are available with capacities from 1 to 18 litres. Cascade systems in 2,5, 4,5, 6 and 12 litre collector capacities that reach −84 °C are ideal for freeze drying samples with low eutectic temperatures. The FreeZone® −105 °C bench top freeze dryer systems are suitable for samples with very low eutectic points including ones containing small amounts of methanol or ethanol.

Supplier: LABCONCO

Optional second column for drying train

Supplier: LABCONCO

In nanoparticle manipulation and dry powder chemical handling, enclosures keep hazardous powders and particulates contained. Room air is pulled into the enclosure from the front, flows to the baffle, and finally passes through a ULPA exhaust filter (99,999% efficient on particles 0,12 μm in size) before returning to the laboratory or cleanroom.

Supplier: LABCONCO

Self-contained ductless enclosures allow safe handling of organic, formaldehyde, acid gas, sulphur compounds, or ammonia chemical fumes and vapours, as well as particulates. Air inside the enclosures passes through carbon filters, and in some cases additional HEPA particulate filters, before being safely exhausted back into the laboratory. No outside ducting is required.

Supplier: LABCONCO

XPert™ Bulk Powder Filtered System is designed to provide user protection from hazardous airborne particulates and fumes generated during powder transfer operations. Patented features include an ergonomic air foil with Clean-Sweep openings to enhance airflow and a zone-perforated rear baffle that creates horizontal laminar airflow to maximize containment. The system includes a built-in blower, 99,99% efficient HEPA filter, true bag-in/bag-out filter disposal system, and pre-wired fluorescent light and switches for blower and light.

Supplier: LABCONCO

Nexus Horizontal Clean Benches are designed to protect non-hazardous applications, and meet the rigorous demands of life sciences, materials science applications, pharmaceutical R&D and compounding pharmacies. The Nexus also provides an ISO Class 4 clean airflow environment for protection of critical, non-hazardous samples.

Supplier: LABCONCO

Purifier®, Service fixture kit, includes serrated hose tip valve with ball valve, quarter turn control handle, hardware and instructions for plumbing to services

Supplier: LABCONCO

Filtered PCR Enclosures direct HEPA-filtered air downward over the work area to provide ISO Class 5 conditions and protect your work from particulate contamination. These specialized vertical clean benches provide a controlled environment in which to perform polymerase chain reaction experiments. These enclosures include a variable digital timer and when the set time expires, the UV light automatically switches off in preparation for the next experiment.

Supplier: LABCONCO

Filter cartridge, Activated carbon cartridge, 1,8 kg

Supplier: LABCONCO

Glassware carts, used to carry glasswares, plasticwares and small instruments in vinyl-coated wire baskets. Choose from 2-baskets or 4-basket styles complete with removable plastic drip pan to catch spills.

Supplier: LABCONCO

The Protector® XL benchtop laboratory hoods offer superior design flexibility. Their panel liners are supplied in three depths to meet individual installation and application requirements. These are suitable for general chemistry applications.