High voltage holiday detectors
Supplier: Industrial Physics
This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.
Expand 2 Items
Analogue hygrometer
Supplier: Industrial Physics
This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.
Expand 1 Items
Impact tester acc. to ASTM G14
Supplier: Industrial Physics
Impact tester used to determine the impact resistivity and flexibility of materials.
Expand 1 Items
Why Choose Corning Fetal Bovine Serum?
Our vertically integrated FBS serum supply chain, from collection to scientist, allows us to provide a consistent supply of FBS.
Wood moisture meters, MaxiLigno
Supplier: Industrial Physics
The MaxiLigno are equipped with the latest technology for precision and easy handling.
Expand 1 Items
Reference guide and photographs for steel surfaces, SSPC-VIS 5/NACE VIS 9
Supplier: Industrial Physics
This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.
Expand 1 Items
Density meter
Supplier: Industrial Physics
This densimeter is designed to perform automatic calculation of density and compensation of water temperature.
Expand 1 Items
Immersion flow cups
Supplier: Industrial Physics
Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.
Expand 6 Items
Accessories for chloride test kit, Bresle Method
Supplier: Industrial Physics
Accessory for test kit, TQC maintenance cleansing solution, 50 ml
Expand 7 Items
Adhesion test kit, HPK
Supplier: Industrial Physics
This Adhesion Test Kit (HPK) is a method developped in the Netherlands by FOSAG and SKH to determine the adhesion of new and old paint layers on wood and woodlike materials.
Expand 1 Items
Assessment cabinets, Colorbox
Supplier: Industrial Physics
The Colorbox is used to provide the illumination conditions for any visual inspection at a 45° angle.
Expand 2 Items
Ultrasonic wall thickness gauges, PosiTector®
Supplier: Industrial Physics
The PosiTector can measure the wall thickness of materials (plastic, stell) using ultrasonic technology. These durable and weatherproof models are resistant to solvents, acids, oils, water and dusts.
Expand 8 Items
Temperature probes for Curvex loggers
Supplier: Industrial Physics
Temperature probe, 0…480 °C
Expand 23 Items
Coating testers, PosiTector® 200
Supplier: Industrial Physics
The Positector 200 has ultrasound technology to measure coating thickness over non-metal substrates.
Expand 6 Items
Grindometers
Supplier: Industrial Physics
These grindometers or gauges of fineness are precision instruments to determine particle size and fineness of many materials like paints, lacquers, pigments, filler, chocolate and more. TQC Grindometers have double grooves with graded slopes graduated in three different parameters: µm (microns), NS (Hegman) and PCU (North).
Expand 11 Items
Accessories for linear abraser, Taber® 5750
Supplier: Industrial Physics
H18 Wearaser, medium, Taber®
Expand 1 Items
Temperature loggers, metal sheet and coil profiler
Supplier: Industrial Physics
The metal sheet and coil coating cure profiler monitors the temperature profile of the coil strip at various points across its width as it is fed through the oven.
Expand 1 Items
Surface probes, clamp-type, for Curvex datalogger
Supplier: Industrial Physics
Small and elegant clamp-type probes to measure temperature of any object.
Expand 4 Items
Surface probes, clamp-type, for Curvex datalogger
Supplier: Industrial Physics
Clamp-type probes to measure object temperature (480 °C).
Expand 2 Items
Accessories for pencil hardness test
Supplier: Industrial Physics
Accessory for coating tester, Pencil set from 8b to 10H (8B, 7B, 6B, 5B, 4B, 3B, 2B, B, HB, F, H, 2H, 3H, 4H, 5H, 6H, 7H, 8H, 9H, 10H) in aluminum case
Expand 2 Items
Reference guide and photographs for steel surfaces, SSPC-VIS 1
Supplier: Industrial Physics
The SSPC is using visual reference, that features over 50 full colour pictures of (coated and uncoated) rusted steel surfaces, before and after dry abrasive blast cleaning.
Expand 1 Items
Accessories for adhesion testers, PosiTest AT-A
Supplier: Industrial Physics
Araldit epoxy glue, for gluing the dolly to the surface, 2×24 ml
Expand 7 Items
Temperature gradient plate for MFFT test
Supplier: Industrial Physics
Temperature gradient plate for determining minimum film forming temperature (MFFT) test. The instrument can be used to define the white point/glass transition temperature of dispersion materials, synthetic resins, enamels and the blocking power and stacking capability of coated papers, foils, prints.
Expand 2 Items
Magnetic hotplate stirrer, digital
Supplier: Industrial Physics
This ceramic coated hotplate stirrer has high chemical and acid resistance.
Expand 1 Items
Cross cut adhesion test kit
Supplier: Industrial Physics
The TQC Cross Cut adhesion test kit (Master Paint Plate) is a stainless steel measuring tool that features: a 1, 1,5, 2 and 3 mm cross cut adhesion test according NEN-EN-ISO 2409:2003 and ASTM D 3359 (X-cut) Andreas cross.
Expand 1 Items
Concrete inspection hammer
Supplier: Industrial Physics
Hammer used to test the quality of concrete, as well as other construction materials, for analysing resistance.
Expand 1 Items
Durometers
Supplier: Industrial Physics
Durometers for measuring impression hardness of soft materials.
Expand 2 Items
Sound level meter, digital
Supplier: Industrial Physics
Easy to use digital sound level meter with wide dynamic range, 30 to 130 dB in the frequency range 31,5 Hz to 8 kHz
Expand 1 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio