1134 Results for: "Industrial Physics"

Supplier: Industrial Physics

Spare Karsten tube, vertical

Supplier: Industrial Physics

Simple hand-held digital thermo/hygrometer.

Supplier: Industrial Physics

This digital tachometer is designed to be used for both contact and non-contact measurements.

Supplier: Industrial Physics

The MaxiLigno are equipped with the latest technology for precision and easy handling.

Supplier: Industrial Physics

This pictorial standard shows two uncoated, rusted steel surfaces (Conditions C and D) before and after wet abrasive blast cleaning. Photographs illustrate two degrees of cleaning (WAB 6 and WAB 10) for each initial condition with additional photos that depict the appearance of light, moderate, and heavy flash rust after cleaning. Also contains a written guide to the use of reference photographs and additional explanatory notes. Cleanliness requirements for conditions depicted are defined by the joint SSPC/NACE surface preparation specifications for commercial (SP 6/NACE 3) and near-white blast cleaning (SP 10/NACE 2). Photos of commercial and near white surfaces achieved by dry abrasive blast cleaning can be found in SSPC-VIS 1.

Supplier: Industrial Physics

This apparatus is designed to detect of coating porosity in dielectric (insulation type) coatings on conductive substrates, including concrete.

Supplier: Industrial Physics

Cylindrical film applicator with four application sides for applying paint films of four different predefined thicknesses in film width 60 or 80 mm. Suitable for applying a host of different products onto flat and relatively solid substrates. Made from high grade stainless steel, the film applicator will not be affected by acid or base elements.

Supplier: Industrial Physics

This automatic adhesion tester measures the adhesion of coatings applied on metal, wood, concrete and similar substrates.

Supplier: Industrial Physics

The Automatic Film Applicator Standard provides a reliable basis to apply coating films to test charts, panels or foils in a uniform and reproducible way in order to eliminate variations caused by human factors.

Supplier: Industrial Physics

This high precision destructive hygrometer is designed for applications in concrete, sand cement, and other construction materials. The water present in the sample chemically reacts with calcium carbide produces pressure in the vessel, which is proportional to the residual moisture content.

Supplier: Industrial Physics

These coated metal calibration standards consist of a set of four calibration plates.

Supplier: Industrial Physics

Electronic coating gauges use magnetic and eddy current principles to measure coating thickness on both ferrous and non-ferrous metals with all PosiTector 6000, 200, DPM, UTG, RTR and SPG probes.

Supplier: Industrial Physics

Bird-type film applicators feature one flat edge and one application side for applying a pre-defined coating thickness. Bird-type applicator single gap is available in film width 50 and 75 mm and can be customised for applying a host of different products onto flat and relatively solid substrates. All Bird-type film applicators are made from high grade stainless steel and are not affected by acid or base elements.

Supplier: Industrial Physics

Combination gauge equipped with two different tips: Sharp needle for surface roughness and round tip for coating thickness.

Supplier: Industrial Physics

RAL 840-HR are the basic collection for matt colour shades and RAL 841-GL for glossy colour shades. Contains safety and signalling colours with the colour requirements of DIN regulations.

Supplier: Industrial Physics

The PosiTest DFT measure coatings on all metals - The DFT Fe measures non-magnetic coatings on steel while the DFT Combo measures both non magnetic coatings on steel and non conductive coatings on aluminum and brass.

Supplier: Industrial Physics

profi LIGNO are moisture meters specifically designed for wood and building materials such as screed or gypsum.

Supplier: Industrial Physics

mini LIGNO classic+ is a wood moisture meter that provide four wood groups and 16 single species of wood.

Supplier: Industrial Physics

mini LIGNO duo is a wood moisture meter that provides four different base-wood groups, eight building materials, such as gypsum or screed.

Supplier: Industrial Physics

Lory viscosity cup designed for quick measurements on location or during production processes.

Supplier: Industrial Physics

Dip cups can be used to provide a quick 'break-thread' flow time comparative measurements on site in a manufacturing environment.

Supplier: Industrial Physics

The X-Rite RM200QC imaging spectrocolorimeter bridges the gap between colour appearance and material colour from incoming material batches to outgoing product shipments. It is designed to provide stable colour comparisons for materials and products wherever colour control is important.

Supplier: Industrial Physics

The temperature control jacket for viscosity cups is a double jacketed casing of anodised aluminium with built-in spirit level to bring the viscosity beaker to the required temperature with cooled and heated liquids.

Supplier: Industrial Physics

Flow cup viscometer, Ford

Supplier: Industrial Physics

Non destructive instrument for measuring moisture levels in wood.

Supplier: Industrial Physics

These cylindrical bend testers are used to determine the elasticity, adhesion and elongation of paint on metal.

Supplier: Industrial Physics

This USB microscope can be connected to a PC in order to determine the structure of surfaces or other objects. It is designed to analyse coating failures, imperfections or treatment quality.

Supplier: Industrial Physics

The portable combo waterproof tester offer high accuracy pH, conductivity/TDS and temperature measurements in a single tester.

Supplier: Industrial Physics

Multi-functional film applicator (Octoplex) with 8 pre-defined thickness sides for applying paint films of 25, 50, 75, 100, 125, 150, 175, 200 µm. Film width 60 mm. The high-grade stainless steel will not be affected by acid or base elements.

Supplier: Industrial Physics

This Cross Cut adhesion test kit (CC2000) is used to test the adhesion of dry coats of paint on their substrate by means of a series of cuts through the coating.