1116 Results for: "Cole-Parmer"

Supplier: Cole-Parmer

Replacement gas chamber sealing pad, stuart®, For: Sample concentrator

Supplier: Cole-Parmer

Quickly concentrate multiple samples in a block at once.

Supplier: Cole-Parmer

Accessories for flame photometers, For: PFP7 and PFP7/C, Calcium standard solution (1000 ppm)

Supplier: Cole-Parmer

The Techne® Dri-Blocks® are particularly suitable for microbiology and clinical laboratories for incubation, boiling, inactivation, wet ashing, sample concentration and enzyme analysis. There is a choice of temperature ranges; 25 to 100 °C or 25 to 200 °C. These models have a rotary knob for temperature setting (but no digital display).

Supplier: Cole-Parmer

Electrode, pH, Combination pH electrode, bulb, pH: 0 - 14, 0...+80 °C, Glass, Diaphr.: Ceramic frit, Electrolyte: 4M KCl (refillable), Ø×L: 12×120 mm, BNC, 1 m cable, For: Oils, biofuels, non aqueous samples, Tris buffers

Supplier: Cole-Parmer

These electrodes with epoxy body are ideal for the measurement of food extracts.

Supplier: Cole-Parmer

"Clip On" Tempunit® thermoregulator designed to be used with Techne® unheated water baths or any other suitable laboratory vessels. They will heat, circulate and safely control the temperature of the liquid in the bath within precise limits. Units have a rugged splashproof case, a powerful pressure pump and external circulation fittings.

Supplier: Cole-Parmer

The SB range of fluidised baths offers a safer alternative to the dangers associated with high temperature oil and salt baths. These units are designed to be bench or floor standing and only require an electrical and air supply for operation. Air passes through the mass of the aluminium oxide (Alundum) particles via a porous plate in the base of the unit separating the individual particles and suspending them in free air, giving the properties of a liquid bath.

Supplier: Cole-Parmer

Choose a heater, then blocks to suit your application needs!

Supplier: Cole-Parmer

Printer PR2000 for use with IA9000 series

Supplier: Cole-Parmer

Combined electrodes for use with Jenway ion meters.

Supplier: Cole-Parmer

Mains power supply, EU-plug, 230 V, For: Jenway pH meters

Supplier: Cole-Parmer

pH electrode cleaning solution, 500 ml, For: Jenway pH electrodes

Supplier: Cole-Parmer

Extensive range of cuvettes for spectrophotometry for measuring liquids.

Supplier: Cole-Parmer

Made from anodised aluminium, blocks have a separate hole to accommodate a thermometer if required.

Supplier: Cole-Parmer

Provide clean and easy operation.

Supplier: Cole-Parmer

Slide drying bench

Supplier: Cole-Parmer

Run multiple reactions in a single station, saving time and money.

Supplier: Cole-Parmer

3505: Simple to use laboratory pH/mV/°C meter for use in general purpose and educational applications. It utilises rotary controls for mode selection and pH calibration. A novel design feature ensures that inadvertent movement of the calibration controls has no effect during sample measurement.

Supplier: Cole-Parmer

Fully specified dissolved oxygen meter from Jenway that includes full support for the B.O.D 5-day test protocol. Remote monitoring and data collection are facilitated by the provision of both analogue and digital outputs and in the event of power removal all user-defined parameters are retained.

Supplier: Cole-Parmer

Corrosion resistant baths with stainless steel inners for easy cleaning.

Supplier: Cole-Parmer

High temperature cooling coil, Cole-Parmer®, For: All Cole-Parmer IC-300 series immersion circulators

Supplier: Cole-Parmer

The in situ adapter is a single piece of machined aluminium and, apart from regular cleaning with water and a mild laboratory cleaning detergent, is completely maintenance-free. The aluminium perimeter ridge allows the thermal cycler lid to be closed without risking damage to glass slides and PCR samples. The adapter can be used to convert a Prime or PrimeG gradient thermal cycler to an in situ instrument as simply as inserting a PCR plate.

Supplier: Cole-Parmer

These plates are made from PP.

Supplier: Cole-Parmer

The easy-to-use 430 is designed to readily withstand the rigours of field work, while reliably measuring pH and conductivity.

Supplier: Cole-Parmer

This electric Bunsen burner is ideal for heating test tubes, crucibles, flasks and beakers regardless of their shape. Radiation is directed upwards to a focal point. Low power consumption (400 W).

Supplier: Cole-Parmer

Electrode, pH

Supplier: Cole-Parmer

Quick, easy navigation with large color touchscreen display.

Supplier: Cole-Parmer

Thermal insulating cartridge provides maximum heat transfer.

Supplier: Cole-Parmer

Accepts 250 to 1000 ml round bottom flasks saving you money.