1173 Results for: "Bohlender"
Magnetic stirrer heads with flat flange, BOLA
Supplier: Bohlender
Magnetic stirrer heads consist of perfect capsulated drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass. These stirrer heads are designed with flat flanges sealed with gasket.
Expand 2 Items
GL-Aeration for bottles, BOLA
Supplier: Bohlender
PPS screw cap and PTFE body.
Expand 2 Items
Accessories for vaccum desiccator
Supplier: Bohlender
Replacement shelf with two rails, PMMA transparent, SICCO, For: Vaccum desiccator
Expand 1 Items
Microwave digestion vessels, BOLA
Supplier: Bohlender
Dimensionally stable basic vessel and screw cover made of TFM, homogenous, non porous surface.
Expand 8 Items
Snap valves, BOLA
Supplier: Bohlender
Body made of PTFE with 2 connections. Nuts made of glass-fibre reinforced PTFE for connecting tubing or tube.
Expand 2 Items
Gas scrubber columns, BOLA
Supplier: Bohlender
Base, upper head connections and frit made from PTFE, column body, riser, inlet and outlet tubes made from FEP.
Expand 2 Items
Centrifugal stirring shafts, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel with the stirring unit made completely of PTFE.
Expand 6 Items
Assortment of remainder tubing, BOLA
Supplier: Bohlender
Assortment of remainder tubing, BOLA
Expand 1 Items
Anti-static explosion-proof tubing rolls, PTFE EX, BOLA
Supplier: Bohlender
Very good electric conductivity due to a special 'anti-static compound' made of pure PTFE and highly pure carbon dust (less than 2,5%).
Expand 5 Items
Magnet holder for waste pipes, b.safe
Supplier: Bohlender
Pipe clamp made of PE with permanently fixed power magnets. b.safe Waste Pipes can easily be clipped into the pipe clamp for tube Ext.Ø 32 mm.
Expand 1 Items
b.safe Funnels 180
Supplier: Bohlender
Funnel made of PE / static dissipative PE-EX for liquid waste disposal. The funnel can be safely mounted on the waste container with its freely turnable cap that is safely fixed with the filling neck.
Expand 24 Items
Adaptors for exhaust filter connection, b.safe
Supplier: Bohlender
Adaptor for installation of capillaries with b.safe fittings at the exhaust filter connection of the b.safe waste caps.
Expand 2 Items
Exhaust filters for barrels, b.safe
Supplier: Bohlender
Filter body made of PE with connection thread for direct installation on barrels. Lid with aeration openings and label field to monitor service life. Filling made of activated carbon for adsorption of solvents.
Expand 3 Items
Antistatic explosion proof tubing, b.safe, Bohlender
Supplier: Bohlender
Excellent electric conductivity due to a special 'antistatic compound' made of pure PTFE and finest, highly pure carbon dust (less than 2,5%). Colour: black.
Expand 6 Items
Level indicators, b.safe
Supplier: Bohlender
Insert with screw-in thread for barrels or screw cap for canisters. With integrated level indicator to monitor the liquid level during filling as well as a neck with GL 45 thread for the assembly of a b.safe funnel with GL 45 thread.
Expand 8 Items
Laboratory bottles, b.safe
Supplier: Bohlender
Laboratory flask made of Borosilicate glass including screw cap and spout made of PP.
Expand 2 Items
Tube tags, b.safe
Supplier: Bohlender
Flexible tube tag to stick on capillaries and tubes with Ext.Ø 0,4 to 6,35 mm, assorted colours (5 colours per pack).
Expand 1 Items
System waste caps LC, b.safe
Supplier: Bohlender
b.safe waste tubes can be connected to the canister by means of these b.safe system waste caps and solvents can be collected safely. To avoid spill over of canisters through the connection of a Waste Cap to a b.safe Display for electronic level control. The filling levels of waste containers in laboratory cupboards and workbenches can be reliably monitored. With the use of b.safe Waste Tubes, solvent waste is led directly into the canister, solvent vapours are held back by the exhaust filter with activated carbon or can be led to the hood by means of a venting hose.
Expand 3 Items
T-connection tubes for waste pipes, b.safe
Supplier: Bohlender
T-shaped connector made of static dissipative PE-EX.
Expand 1 Items
Magnetic stirrer heads with ground joint, BOLA
Supplier: Bohlender
Magnetic stirrer heads designed with gastight permanent magnetic coupling with ball bearing encapsulated in ceramics and square connection for cardan joint.
Expand 2 Items
Multiple distributors for bottles, BOLA
Supplier: Bohlender
Blue screw cap and distributor body both made of PTFE.
Expand 1 Items
Bottles, wide neck, PFA, conical neck, with screw cap, BOLA
Supplier: Bohlender
PFA, translucent.
Expand 5 Items
Magnetic stirrer heads, BOLA
Supplier: Bohlender
Magnetic stirrer heads consist of perfect combination of drive shaft with ball bearings, rotor and lower bearing made of PTFE and a conductor made of borosilicate glass.
Expand 2 Items
Double temperature probes, BOLA
Supplier: Bohlender
These temperature probe with two independent thermocouples in one PTFE-encapsulated stainless steel tube (1,4571) for parallel temperature measurement in aggressive liquids.
Expand 4 Items
Replacement parts for screw joints, BOLA
Supplier: Bohlender
Made of glass-fibre reinforced PTFE.
Expand 12 Items
Stirring shafts, two paddles, BOLA
Supplier: Bohlender
Stirrer shafts made of PTFE-jacketed stainless steel and the paddles made of PTFE.
Expand 8 Items
Supplier: EPPENDORF
Supplier: Integra
Supplier: OZ BIOSCIENCES
Supplier: VWR Collection
Supplier: Corning
Supplier: SenseAnywhere
Supplier: Integra
Supplier: NANOENTEK
Supplier: VWR Collection
Supplier: Integra
Supplier: Testo
Supplier: Sartorius
Supplier: SenseAnywhere
Supplier: Quantabio