You searched for: Fittings and Connectors
These fittings for high-pressure connections are designed for tightening by hand or with compatible tools. The male and female fittings available will secure connections between instruments . Available in different sizes, shapes, and materials of fabrication, these fittings can be tailored to be suitable for any unique laboratory equipment setup. Fittings are suitable for use under extensive temperature ranges and are manufactured from stainless steel or plastic polymers for excellent strength.
Ferrules for Thermo Scientific GCs
Supplier: Restek
Graphite Ferrules for Vu2 union connectors.
Expand 5 Items
Connectors, click-on in-line super clean®
Supplier: Restek
Click-on connectors allow you to change traps quickly, without introducing oxygen into your system.
Expand 2 Items
Tubing connectors, SVS, bent
Supplier: witeg Labortechnik
Tubing connection consisting of screw cap, hose connection with silicone seal and threaded tubes.
Expand 1 Items
Low-dead-volume connector kits, MXT®
Supplier: Restek
Rugged MXT® low-dead-volume connectors are Siltek® treated to make them inert to active compounds. They can be used at temperatures up to 430 °C without degrading the deactivated layer.
Expand 4 Items
Fittings, Siltek®/Sulfinert® and Silcosteel®-CR treated, Parker®
Supplier: Restek
Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in Siltek®/Sulfinert® or Silcosteel®-CR treatment.
Expand 64 Items
Connector kits, SeCure® 'Y'
Supplier: Restek
Connector kits connects two analytical columns to a transfer line or guard column. They have a reliable seal integrity and will not unexpectedly disconnect during temperature programmed analyses. The open design allows visual confirmation of the seal for added confidence in the connection.
Expand 4 Items
GC ferrules, Graphite Vespel®
Supplier: Restek
These ferrules can be used with Vacuum Vu-Union® connectors.
Expand 4 Items
GC column-mass spectrometer connector, EZ No-Vent®
Supplier: Restek
A critical orifice in the EZ No-Vent® connector minimizes the amount of oxygen allowed into the MS source, eliminating the need for purge gas required. This enables to skip the lengthy vent and pump-down cycle.
Expand 7 Items
Connectors, Press-Tight®
Supplier: Restek
Deactivated Press-Tight® connectors maintain complete inertness along the GC flow path and Siltek®-deactivated connectors are ideal for organochlorine pesticides analysis. These connectors fit 0,33 to 0,74 mm ext. Ø and 0,1 to 0,53 int. Ø columns.
Expand 17 Items
Double connector, click-on in-line super clean®
Supplier: Restek
Double connectors are used to effectively connect any click-on trap to a click-on indicator.
Expand 1 Items
Column end-fittings
Supplier: Restek
These ¹/₄" compression end-fittings are compatible with ¹/₁₆" connecting tubing using Valco and Parker fittings.
Expand 2 Items
Connectors and ferrules, Gerstel GRAPHPACK® 3D/2
Supplier: Restek
GRAPHPACK® technology provides a complete system that quickly and reliably makes a leak-tight, low-dead-volume connection. The central component is a metal-jacketed graphite ferrule - the ideal seal for GC applications.
Expand 5 Items
Fitting kits, Swagelok®
Supplier: Restek
This Swagelok® fitting kits includes the most common assortment of ¹/₈" and ¹/₄" brass fittings.
Expand 1 Items
PTFE ferrules
Supplier: Restek
PTFE ferrule with fitting size 1,6 mm, PTFE, Hole Ø: 1,6 mm
Expand 5 Items
Capillary nuts
Supplier: Restek
These capillary nuts are ideal for Shimadzu 17A, 2010, and 2014 GCs.
Expand 2 Items
Fitting kit, stainless steel, Swagelok®
Supplier: Restek
The Swagelok® fitting kit includes the most common assortment of stainless steel fittings for GC fixtures.
Expand 1 Items
GC capillary column connectors, Swagelok®
Supplier: Restek
Parker's fittings are ideal for installing new equipment, modifying existing instrumentation or replacing worn connections.
Expand 82 Items
Vespel/graphite ferrule
Supplier: Restek
Vespel/graphite ferrule, fitting size 0,8 mm, Hole Ø: 0,5 mm
Expand 2 Items
Fittings, brass and stainless steel, Parker®
Supplier: Restek
Parker® (A-Lok) fittings are ideal for installing new equipment, modifying existing instrumentation, or replacing worn connections. Fittings are available in brass or 316 grade stainless steel.
Expand 69 Items
Hose connections
Supplier: witeg Labortechnik
Hose connections, bent or straight, made of polypropylene (PP) or PFA, with silicone rubber liners.
Expand 8 Items
Fittings, secure-fit
Supplier: Restek
Secure-Fit provides a good connection between HPLC components for trouble-free chromatography.
Expand 9 Items
GC capillary column connector, reducing union, Swagelok®
Supplier: Restek
Swagelok®, Reducing union, 1/4" to 1/16", Stainless steel
Expand 2 Items
Capillary inlet adaptor fitting kit
Supplier: Restek
This capillary inlet adaptor fitting kit is ideal for split/splitless fitting for capillary columns.
Expand 1 Items
Fittings, CGA
Supplier: Restek
CGA-specified nuts and nipples with internal frit, 6,35mm NPT nickel-plated brass.
Expand 3 Items
Luer lock valve adaptors
Supplier: Restek
These Luer lock valve adaptors are suitable for connecting a Luer lock fitting to a Rheodyne or Valco valve.
Expand 1 Items
Fittings, Siltek®/Sulfinert® treated, Valco®
Supplier: Restek
Valco®, Zero dead volume tee, Siltek®/Sulfinert® treated, 1/8”, Siltek® treated stainless steel
Expand 4 Items
Capillary column nuts for Bruker/Varian GCs
Supplier: Restek
These capillary nuts are made from brass or stainless steel.
Expand 2 Items
Injector nut kit
Supplier: Restek
Injector nut kit for Shimadzu 17A, 2010, and 2014 GCs.
Expand 1 Items
One-piece fingertight fittings
Supplier: VARIAN
PEEK fittings resists pressure up to 5000 psi and temperature of 100 °C.
Expand 3 Items
Injector/detector plug nuts
Supplier: Restek
These are used to cap off a detector and prevent hydrogen from accidentally diffusing into the oven from an unused detector base.