You searched for: Fittings and Connectors

Supplier: Bohlender

All adaptors of this type are supplied with a male thread, a female thread and recessed grips.

Supplier: Avantor Fluid Handling

The ease of push-to-connect and the durability of 316 stainless steel.

Supplier: Avantor Fluid Handling

The ease of push-to-connect and the durability of 316 stainless steel.

Supplier: Bohlender

Straight fitting made of PTFE, capillary connection on both sides (UNF ¹/₄" thread), with 2 PFA fittings each for tubing Ext.Ø 1,6/2,2/3,2 mm.

Supplier: Trajan Scientific and Medical

These reusable ferrules are made from 100% graphite. They have a temperature limit of 450 °C.

Supplier: Bohlender

Adaptor for space-saving installation of the b.safe Exhaust Filter (GL 14 thread) on the b.safe Waste Cap with thread NPT ¹/₈".

Supplier: Bohlender

Elbow tube approx. 90° made of static dissipative PE-EX.

Supplier: Bohlender

Straight transition thread adapter made of PTFE with two GL-threaded connections.

Supplier: CPC COLDER

MPC Series couplings add ease of use and security to your most critical fluid handling applications.

Supplier: Bohlender

Adaptor for the use of b.safe Exhaust filters on Justrite® Disposal safety cans in order to stop solvent vapours from the escaping in the air during filling with HPLC waste.

Supplier: BURKLE

Universal thread adapter for nearly all drums and other containers with opening of 48 to 75 mm in diameter, regardless of the respective thread.

Supplier: Bohlender

Two-part tubing coupling made of PP with PFA Fitting to connect capillaries with Ext.Ø. 3,2 mm. The passage with the integrated quick lock is tightly closed through loosening the coupling. Tubing connections are easily interrupted without dripping from the tube, tubes and removal flasks are tightly closed during exchange. Version and scope of delivery as per below chart.

Supplier: BURKLE

With the thread adapter made of high-quality stainless steel 1.4301 (304) a pump, a drain cock, or any other connection with thread G 2" (Whitworth pipe thread) can be screwed onto a container with G 1½" thread.

Supplier: Trajan Scientific and Medical

Vespel/graphite GC ferrules are made from quality polyimide/graphite blend. They seal with minimal torque and can be reused and repositioned along capillary columns if not over compressed in the fitting. Due to slight shrinking at high temperatures, they must be retightened after initial temperature cycles to avoid leaks.

Supplier: Saint Gobain Life Sciences

When it comes to retaining flexible tubing and hose onto barbed fittings, BarbLock™ retainers have become the standard in many industries because they solve inherent leak path problems in sensitive and demanding applications. The retainer uses no adhesives or solvents, is ideal for systems transferring delicate liquids or gases.

Supplier: Trajan Scientific and Medical

Designed to be installed only with the force of your fingers delivering an easy, leak-free installation for capillary columns without the use of any tools. Developed with the unique, leak- and air-free properties of SilTite™ ferrules, which results in superior air tightness to reduce background noise in sensitive MS applications.

Supplier: CPC COLDER

NS4 series couplings feature non-spill valves in a compact size, at a great price. Use the NS4 when even a few drops pose problems regarding media cost or environmental regulations. These innovative couplings are lightweight, chemically resistant and easy to use.

Supplier: CPC COLDER

NSH Series couplings are general purpose versions of our pressure-balanced, non-spill, ChemQuik® CQG06 couplings. Moulded polypropylene, EPDM seals and a 100% springless and metal-free flow path provide broad chemical resistance and exceptionally high flow capacity, allowing instant disconnects (and reconnects), even under pressure.

Supplier: Bohlender

Special design allows turning the two halfs of the coupling independently from each other, and to adjust connected components. This design also provides high stability. A sealing lip on the connecting tube with integrated FKM O-ring ensures good sealing on the GL thread.

Supplier: ENTEGRIS

The Sentry® QCIII Quick Connect System is the safest and easiest method of connecting FluoroPure® chemical containers with typical bulk chemical delivery systems. This patented connection system is key coded and uses Entegris' industry leading Flaretek® seal for the main chemical dispense line and radial seals for the remaining three ports. This new system allows the connection to be made without realigning key codes. Subsequent ports have radial seals with FEP encapsulated o-rings. This chemical dispense system incorporates a ³/₄" chemical fill/dispense port, ½" vent port, ¼" connection verification port and optional ³/₄" recirculation port.

Supplier: TCI

Pipe connector, in solid state at 20 °C.

Supplier: Bohlender

Distributor for connection of capillary tubing. With PFA Fittings for capillaries with Ext.Ø 3,2 mm (thread UNF ¹/₄").

Supplier: CPC COLDER

AseptiQuik® connector cuffs provide additional support for more robust applications, so users can continue to transfer media easily with these quick and easy to use AseptiQuik® sterile connectors.

Supplier: Lenz Laborglas GmbH & CO.KG

Tubing connectors made of DURAN® borosilicate glass, straight with two glass olives.

Supplier: DWK Life Sciences

Tubing connection system with two or three top connectors are designed to be used with all sizes of DURAN® GL 45 laboratory and media bottles. These connectors are slightly splayed to facility easier attachment of the tubing.

Supplier: Bohlender

GL 14 and GL 18 hose connectors, made of PFA, GL 25 and GL 32 hose connectors, made of PTFE, with elastic sealing lip and FPM O-ring and nut made of PPS.

Supplier: Bohlender

Elbow tube approx. 90° made of static dissipative PE-EX.

Supplier: CPC COLDER

These ¹/₄" flow quick disconnect couplings are manufactured specifically for the bio and pharma markets.

Supplier: BURKLE

Container connection, with outer thread, PP, Thread: 12,7 mm

Supplier: Avantor Fluid Handling

No need to buy two fitting halves.