Supplier: CONTEC

These PROSAT® polynit heatseal wipes are presaturated with 10% semi-grade IPA/90% DI water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with knife cut edges.

Supplier: CONTEC

Slide 'n seal bag is a resealable bag that allows easy dispensing of PROSAT® polywipe-C pre-saturated wipes. The plastic piece glides across the top of the bag ensuring a tight seal every time the bag is closed. No adhesives are used to keep the bag closed.

Supplier: CONTEC

Contec HydroPure is a blend of 6% hydrogen peroxide and purified water. Contec HydroPure is BPR authorised at EU level and efficacious against bacteria, fungi, moulds, and yeasts.

Supplier: CONTEC

These heat seal wipes are made from filament polyester that is laser cut to bond the fibres at the edges of the wipes. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. The wipes are saturated with 70% USP grade IPA, 30% DI water.

Supplier: CONTEC

These PROSAT® Sterile™ Theta™ wipes are manufactured from a lightweight hydroentangled cellulose/polyester and saturated with a solution of 70% USP grade IPA and 30% deionized water.

Supplier: CONTEC

These wipes are made of 100% knitted polyester pre-saturated with 100% semiconductor grade Isopropyl Alcohol (IPA).

Supplier: CONTEC

These PROSAT® Sterile wipes are manufactured from hydroentangled cellulose/polyester and saturated with a solution of 70% denatured ethanol and 30% purified water.

Supplier: CONTEC

100% no-run interlock knit polyester wipes with sealed edges and increased sorbency.

Supplier: CONTEC

Cellulose/polyester nonwoven wipes presaturated with 70% IPA and 30% DI water

Supplier: CONTEC

Made from high quality, unlaundered 100% continuous filament polyester.

Supplier: CONTEC

These non pyrogenic LE wipes are the first sterile non woven wiping products designed for the pharmaceutical, medical device and biotech industries. Made with Sontara® lyocell/polyester blend fabric, these low endotoxin wipes have excellent sorbency and are packaged, gamma sterilised and validated sterile to a 10⁻⁶
Sterility Assurance Level.

Supplier: CONTEC

Non woven cellulose/polyester hydroentangled wipes made from 55% cellulose and 45% polyester, highly sorbent with excellent durability and good cleanliness.

Supplier: CONTEC

Meltblown polypropylene wipes presaturated with 70% IPA and 30% DI water.

Supplier: CONTEC

This wipe is made of a special grade blue cellulose and polyester, featuring improved cleanliness and excellent sorbency.

Supplier: CONTEC

Presaturated with 70% USP grade IPA and 30% DI water.

Supplier: CONTEC

Non woven wipes pre-saturated with acetone or isopropanol.

Supplier: CONTEC

This microfiber wipe is made of 100% polyester microfibre yarn knitted into a thermally bonded PP substrate.

Supplier: CONTEC

Recycled 100% knitted polyester cleanroom wipes offer a sustainable solution for cleanroom environments, without jeopardising quality or performance. Soft textured wipes clean surfaces without scratching, while offering low levels of particles and fibres, abrasion and chemical resistance, and good solvent compatibility.

Supplier: CONTEC

These non woven PP wipes are saturated with 70% denatured ethyl alcohol and 30% deionised water.

Supplier: CONTEC

Two layers of knitted polyester fabric are laminated together, resulting in a durable wipe with more than twice the absorbent capacity of the individual layers.

Supplier: CONTEC

These non woven wipes are made from meltblown polypropylene pre-saturated with 70% semiconductor grade isopropanol and 30% deionised water.

Supplier: CONTEC

Non woven, hydroentangled polyester/cellulose blend. Ideal for wipe down of products prior to their introduction to the cleanroom.

Supplier: CONTEC

The Twill Jean wipe is a 100% cotton fabric, woven in a 2×1 twill construction. It is very absorbent and has high thermal stability for high temperature applications.

Supplier: CONTEC

The melt blown polypropylene wipes provide a consistent release of solvent to thoroughly remove surface contaminants in critical environments.

Supplier: CONTEC

This wipe is made from filament polyester that is laser cut to bond the fibres at the edges of the wipe. This creates a very clean, non abrasive edge that allows full utilisation of the wipe surface. Pre-saturated with 5% semi grade IPA and 95% DIW.

Supplier: PFENNIG REINIGUNGSTECHNIK

Reusable polyester/carbon cloth for use on all smooth and water-resistant surfaces.

Supplier: CONTEC

The SATWipes are made of pure non woven polyester that is hydraulically entangled creating a soft, durable and clean wipe. The saturation of either alcohol/deionised water or 100% alcohol provides a safe and mild cleaning solution.

Supplier: CONTEC

Made of 100% synthetic fibre and formed using the spunlacing process, this wipe - designed for cleaning delicate optical products such as lenses and mirrors - is exceptionally clean and durable. It has excellent chemical resistance and is therefore ideal for use with solvents. Its open fibre structure provides excellent sorptive capacity.

Supplier: CONTEC

This durable wipe is made from 100% non woven polyester fibers, hydroentagled into an extremely soft, clean, and strong fabric which is very low in both particles and extractables.