You searched for: Drum/Transfer Pumps

Supplier: BURKLE

These drum pumps prevent the escape of dangerous or hazardous vapours when decanting liquids. The vapours produced are fed back to the decanting container from the filling container via the gas displacement line. The gas and liquid lines are also equipped with stop valves.

Supplier: BURKLE

Piston pump is used for watery and petrochemical products.

Supplier: BURKLE

Lever pump is used for petrochemical substances.

Supplier: BURKLE

The withdrawal system for solvents with discharge tube has a barrel pump with fixed discharge tube. The steplessly adjustable immersion tube of the barrel pump can be adjusted to the respective tank. With barrel screw connection for steel barrels with R 2' thread. Can be adjusted for standard commercial tanks with thread adapters.

Supplier: Avantor Fluid Handling

Ideal for contamination-free removal of organic solvents.

Supplier: Avantor Fluid Handling

Ideal for most acids, bases, alcohols, aldehydes and aliphatic hydrocarbons.

Supplier: BURKLE

Manual positive displacement pump for filling, emptying, and transferring liquids between canisters and barrels. Positive pressure is produced using a manual piston and forces the liquid out of the container. Small quantities of liquid can also be drained off with the drain cock. The pump is fitted onto the barrel with a flexible, variable diameter plug. No special thread adapters are needed.

Supplier: BURKLE

The Mini solvent pump is a high quality hand pump for small containers such as bottles, canisters and tanks up to about five litres. For reliable filling and dosing of solvents and readily flammable liquids.

Supplier: BURKLE

In the withdrawal system for solvents with discharge hose, the barrel pump has a flexible discharge hose. The hose makes it possible to dispense the relevant solvent into tanks that are located some distance away and meter it accurately. With barrel screw connection for steel barrels with R 2" thread. Can be adjusted for standard commercial tanks with thread adapters.

Supplier: BURKLE

Canister pump in PP with FKM gasket. For emptying containers, carboys and small barrels up to 60 litres, quickly and cleanly. Pressure is built up with the manually operated piston and forces the liquid out of the container. Suitable for weak acids, alkalis and petrochemicals.

Supplier: BURKLE

The telescopic immersion tube adapts itself to the container height on insertion. This ensures good removal of residual liquid and means that the hand pump can be used with different containers.

Supplier: BURKLE

The barrel pumps AccuOne and EnergyOne with the unique hybrid system ensure fast, flexible and convenient filling. The pumps are equipped with two different power supply systems: AccuOne, driven by a high-performance rechargeable battery or EnergyOne, with a power cable for direct connection to the electrical network. AccuOne and EnergyOne are designed for applications in which even very small amounts of liquid can be added to containers with narrow openings. They are made of high quality materials PP, PTFE and Hastelloy C, to ensure outstanding chemical resistance. This also makes them suitable for dispensing acids and bases.

Supplier: Welch by Gardner Denver

Handy utility vacuum pump is ideal for basic lab operations.

Supplier: NEW PIG

Suitable for aggressive chemicals, solvents, de-greasers and more.

Supplier: Welch by Gardner Denver

These heavy-duty diaphragm pumps are specially designed for use in suction and filtration.

Supplier: NEW PIG

Save time and reduce waste with this chemical-resistant syphon pump.

Supplier: Welch by Gardner Denver

With the biovac 106, nonflammable fluids can be removed easily and very precisely from slides, Petri dishes, cell culture containers, etc, by using different pipettes or glass tips and Pasteur pipettes which can be easily connected to the handvac pipette. The biovac 106 is switched on and off directly at the device or via the optionally available foot switch.

Supplier: Bohlender

Cordless pumps are made of PP, PTFE and Hastelloy®. They are applicable for pumping low viscous liquids.

Supplier: Bel-Art Products, a Part of SP

Fits directly to a standard drum bung or carboy. It is constructed entirely of rugged PE and it is resistance to strong acids, alkalis and many solvents. The pump will efficiently deliver against a 3,65 m head of water and empty a drum or carboy to inside 3 mm of the bottom.
PE, Poly-hand pump.

Supplier: MP Biomedicals

White hand pump suitable for 7X bottles.

Supplier: Bohlender

Sampling pump is made up of PP and PTFE.

Supplier: Dr. Weigert

Drum Pump, Dispenser for 5 L, 10 L and 12 kg canisters (30 ml stroke)

Supplier: KARTELL

Dispensing pump is operated by a unique lever-action stroke and can handle the most viscous materials.

Supplier: GERBER FUNKE

LactoFlash is an accurate, reliable instrument for rapid analysis of the main constituents of milk. It directly measures fat and SNF (Solids Non Fat) and then calculates density, protein, lactose and freezing point.

Supplier: GERBER FUNKE

LactoStar is the big brother of the LactoFlash. It measures fat, protein, lactose, SNF (Solids Non Fat), minerals and calculates the freezing point and density of the milk. The LactoStar uses a 12 ml sample of milk and passes it through thermal and optical sensors to get the results. Up to 30 samples can be processed per hour. The instrument has 3 pumps: The measuring pump, the rinsing pump and the cleaning pump, which are connected to the corresponding canister.

Supplier: NRG DEVELOPMENTS

Suction operated siphon pump.

Supplier: MURRAY S

Dispensing pump is suitable for lotions, creams and gels.

Supplier: asecos

Solvent pump for filling of high purity liquids, removal of organic solvents and flavourings.

Supplier: asecos

Stainless steel drum pump with PTFE seals. Drum pump with outlet hose 1,2 m and discharge arc. for flammable liquids electrically conductive. Can be used in Zone 0 and 1. Explosion group II A.

Supplier: asecos

This drum pump is used for filling high purity liquids. PTFE with stop cock.