You searched for: Transfer Membranes

Supplier: Merck

Immobilon®-P, Immobilon-P blotting sandwich transfer membranes, 7×8,4 cm

Supplier: Cytiva (Formerly Pall Lab)

Biodyne® Transfer Membranes offer high sensitivity and low background for enhanced detection and resolution. They are ideal for nucleic acid detection.

Supplier: Merck

Triton-free, mixed cellulose esters transfer membrane.

Supplier: Merck

The first PVDF transfer membrane for western blotting that wets out in transfer buffer or water. For chemiluminescence or chromogenic detection.

Supplier: Merck

Hydrophobic immobilon-P PVDF transfer membrane for western blotting using chemiluminescence, chromogenic or radioactive detection methods.

Supplier: Merck

Triton-free, mixed cellulose esters transfer membrane, includes 1 dispenser.

Supplier: Merck

Hydrophobic PVDF transfer membrane for western blotting using fluorescent, chemifluorescence, chromogenic, or chemiluminescence.

Supplier: Merck

These Immobilon® PVDF membranes, each optimised for different protein blotting applications.

Supplier: Merck

PVDF transfer membrane hydrophobic for western blotting using chemiluminescence, chromogenic or radioactive detection methods.

Supplier: Merck

Immobilon-NC (HATF) membrane is composed of a mixed cellulose esters matrix. It is devoid of surfactants that may interfere with cell wall integrity during cell growth

Supplier: Thermo Fisher Scientific

Transfer membranes made of high quality PVDF, which provides high binding capacity for proteins and nucleic acids.

Supplier: THERMO OWL SCIENTIFIC

Hydrophobic polyvinylidene fluoride transfer membrane has a high signal-to-noise ratio, which allows for the use of mild blocking procedures

Supplier: Cytiva (Formerly Pall Lab)

Naturally hydrophobic PVDF, ideal for a wide variety of protein-analysis applications. The family of FluroTrans® media are white, microporous solid phase supports that bind proteins tenaciously via hydrophobic interactions. FluoroTrans® membrane is optimised for N-terminal protein sequencing. FluoroTrans® W membranes are optimised for Western transfer applications. They allow for sensitive protein detection with low background and very low protein burn-through. Immobilised proteins can be visually detected with Coomassie® Blue, Amido black, Ponceau S, and colloidal gold.

Supplier: Thermo Fisher Scientific

Nitrocellulose membranes are a popular matrix used in protein blotting because of their high protein-binding affinity, compatibility with a variety of detection methods (chemiluminescence, chromogenic, and fluorescence), and the ability to immobilise proteins, glycoproteins, or nucleic acids. Protein immobilisation is thought to occur by hydrophobic interactions, and high salt and low methanol concentrations help improve protein immobilisation to the membrane during electrophoretic transfer, especially for proteins with higher molecular weights. Nitrocellulose membranes are not optimal for electrophoretic transfer of nucleic acids, as the high salt concentrations that are required for efficient binding will effectively elute some or all of the charged nucleic acid fragments.

Supplier: Thermo Fisher Scientific

Biodyne™ B nylon membranes are sheets of positively charged nylon that provide excellent binding characteristics for nucleic acid transfer, blotting and detection methods. Biodyne™ B nylon membrane is manufactured with a matrix pore size of 0,4 micron. It contains exclusively positive charges, providing the highest possible binding capacity for negatively charged molecules, like DNA and RNA.

Supplier: Thermo Fisher Scientific

Biodyne™ A nylon membranes are sheets of unmodified nylon that provide excellent binding characteristics for nucleic acid transfer, blotting and detection methods. Biodyne™ A nylon membrane is manufactured with a matrix pore size of 0,45 micron. It contains both negatively and positively charged groups, enabling it to bind many kinds of macromolecules.

Supplier: G-Biosciences

Pre-cut transfer membranes and padding for Western blot transfer procedures. Pre-cut membranes are supplied sandwiched between blotting paper padding. Simply soak the membrane in transfer buffer and assemble with the gel in a transfer cassette. Nitrocellulose (0,22 µm pore size) and PVDF (0,45 µm pore size) membranes are available.

Supplier: Whatman products (Cytiva)

Protran® membranes are manufactured from 100% pure nitrocellulose to ensure the highest binding capacity possible. They are compatible with a variety of detection methods, including isotopic, chemiluminescent, colorimetric and fluorescent. No methanol pre-wetting step is required, making this the membrane of choice for proteins which prefer aqueous environments. Prior to transfer the membrane is simply wetted with water, and then placed in the transfer buffer. No other pre treatment steps are necessary.

Supplier: Whatman products (Cytiva)

The Nytran® Nylon (Nytran® N) membrane is ideal for applications that require a lower charge. It is designed for Southern and Northern blotting as well as colony and plaque lifts and Dot or Slot Blots. Nytran® N is compatible with isotopic detection methods.

Supplier: Whatman products (Cytiva)

Nytran® SuPerCharge (SPC) nylon membranes have a very high positive charge and a higher density of nylon per unit area. Available as circles, sheets or rolls for microplates.

Supplier: Cytiva

Amersham™ Protran® Premium nitrocellulose blotting membranes provide excellent sensitivity, resolution and low background in fluorescence Western blotting detection applications.

Supplier: Cytiva

Amersham™ Hybond™-N+ is a positively charged nylon membrane with a binding capacity for nucleic acids up to 600 µg/cm² recommended for use with radioactive or non radioactive chemiluminescence and chemifluorescence detection systems.

Supplier: Cytiva

Amersham™ Hybond™ SEQ 0.2 PVDF is a 0,2 µm pore size hydrophobic membrane designed specifically for protein sequencing applications. The small pore size of this membrane minimises ‘blow-through’ and increases protein binding over a wide range of molecular weights.

Supplier: Cytiva

Amersham™ Hybond™ 0.2 PVDF is a 0,2 μm pore size hydrophobic membrane with high physical strength. This results in significant handling advantages over unsupported nitrocellulose and makes the membrane highly suitable for stripping and reprobing. The small pore size of the membrane minimises 'blow-through' and increases protein binding over a wide range of molecular weights. Ideal for use with standard colorimetric and chemiluminescent detection methods for proteins of

Supplier: Cytiva

Amersham™ Hybond™ LFP 0.2 PVDF is a low fluorescent, hydrophobic membrane, with 0,2 µm pore size, for protein transfer. Amersham™ Hybond™ LFP is optimised for fluorescent detection in Western blotting applications and for use with the Amersham™ ECL Plex™ detection system.

Supplier: Cytiva

Hybond™ ECL™ gives excellent sensitivity, resolution, and low background for all labelling and detection systems (radioactive, non radioactive, and chromogenic), especially when used with ECL™, ECL™ Prime, and ECL™ Plex Western Blotting Detection kits and reagents. Special packaging features include interleaf on both sides of the membrane and air-tight resealable aluminium bag with label space for marking the 'opened on' date.

Supplier: Cytiva

Amersham™ Hybond™ P 0,45 PVDF is a 0,45 μm pore size hydrophobic membrane, with high physical strength, highly suitable for stripping and reprobing. For use in chemiluminescent and fluorescent detection methods for proteins of >Mr 20000.

Supplier: Cytiva

Amersham™ Protran® Supported is a robust protein blotting membrane, with 0,2 µm pore size, made of reinforced nitrocellulose for multiple reprobings.

Supplier: Cytiva

Amersham™ Protran® membranes are manufactured from 100% pure nitrocellulose to ensure the highest binding capacity possible. They are compatible with a variety of detection methods, including isotopic, chemiluminescent, colorimetric and fluorescent. No methanol pre-wetting step is required, making this the membrane of choice for proteins which prefer aqueous environments. Prior to transfer the membrane is simply wetted with water, and then placed in the transfer buffer. No other pretreatment steps are necessary.

Supplier: Sartorius

These nitrocellulose blotting membranes are ideal for Western blotting, DNA blotting, as well as dot or slot blots. They are optimally adapted to all protein blotting systems, such as electro transfer, semi-dry or simple capillary blotting. A high protein binding capacity is combined with low background to give good blocking possibilities. High membrane stability ensures easy handling of the blotting membrane, even when wet.