You searched for: Filters

Supplier: Whatman products (Cytiva)

A standard grade filter for boiler water analysis.

Supplier: Sartorius

These filter papers are used for routine analyses like clarification, determination of substances, but also as discs with a center hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore
suitable for pressure or vacuum filtration.

Supplier: Sartorius

These sterile cellulose nitrate and PES Microsart® e.motion membrane filters can be used for colony counting, particle testing and microscopy. They are specifically designed for use in the Microsart® e.motion dispenser.

Supplier: ENTEGRIS

Photochemical filter with superior contaminant retention and low hold-up volume performance in sub-10 to 180 nm technology nodes.

Supplier: Merck

The bi-directionally supported Millex-GP50 filter is a sterilising filter for aqueous solutions. It removes microorganisms, particles, precipitates, and undissolved powders larger than 0,22 μm. This single-use product consists of a 0,22 μm membrane filter sealed in an acrylic housing.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%.

Supplier: Whatman products (Cytiva)

Whatman Grade 1V lab filter paper from Cytiva business is a widely used pre-folded filter for many general filtration applications.

Supplier: Merck

Ultrafiltration cut disc membranes are available in Ultracel® regenerated cellulose and Biomax® polyethersulvone (PES).

Supplier: Merck

Millex® Filters for the Samplicity® G2 System

Supplier: Merck

These filters include multiple media: a graduated prefilter and a membrane filter for high throughput filtration of viscous or particle-laden solutions.

Supplier: Sartorius

Claristep® filter units with PP housing and RC membranes are used for sample preparation by particle removal prior to analytics. The filters are suitable for small sample volumes of 60 to 600 µl.

Supplier: Whatman products (Cytiva)

These white cotton linter cellulose filters are ideal for routine investigations of foreign substances in a variety of sample types.

Supplier: Merck

These filters include multiple media: a graduated prefilter and a membrane filter for high throughput filtration of viscous or particle-laden solutions.

Supplier: Avantor Fluid Handling

Ideal for ultrapure filtration applications.

Supplier: Sartorius

These smooth filter papers are made of refined pulp and linters with more than 95% alpha-cellulose content. The ash content of these filter papers is between 0,1 and 0,15%. They are used for routine analyses like clarification, determination of substances, but also as discs with a centre hole for technical applications. Grades with a wet burst resistance >30 kPa are referred to as wet-strengthened and are therefore suitable for pressure or vacuum filtration.

Supplier: Cytiva (Formerly Pall Lab)

Removes odor, colloids, and organics from liquids using activated carbon.

Supplier: Sartorius

Hydrophilic polyamide (nylon) membrane filters. For the filtration of alkaline solutions and organic solvents.

Supplier: Sartorius

Quartz microfiber filters are free of glass fibers and binding agents.

Supplier: ENTEGRIS

These filters provide superior filtration for critical dilute, aqueous and low neutral pH cleaning applications at advanced technology nodes. The clean, dual capture membrane improves process performance and reduces on-wafer defects. In addition to sieving particle capture which is always active, the non sieving retention mechanisms are also active and strongest in conditions where pH is <3 and no surfactant is present.

Supplier: Whatman products (Cytiva)

With less than 0,01% ash, Cytiva's Whatman Grade 589/1 filter papers can be used for the Blaine test in the cement industry and as an ash content test filter for foodstuffs.

Supplier: Syngene (a division of the Synoptics group)

Syngene, Long pass filter, LW032, 580 - 660 nm, For: Gel documentation systems IG/UG and DG units

Supplier: Merck

Filters for sterilising or clarifying biological solutions. The larger filtration area increases flow rate and throughput. It also makes it easier to filter solutions because it reduces the pressure required to empty the syringe.

Supplier: Merck

Filter cartridge, Progard 2, pretreatment pack, long, filters large particle

Supplier: Sartorius

Hydrophobic cellulose nitrate and cellulose acetate gridded membrane filters for colony count and sterility testing, with outstanding retention rates for microorganisms.

Supplier: ENTEGRIS

These filters are designed for small to mid volume POU photochemical and solvent filtration needs. They can be used for the hydrophobic filtration of photoresists, thinners and solvents.

Supplier: Merck

Optimized for the concentration and recovery of genomic DNA with SDS buffer. The low nonspecific binding characteristics of the membrane and the other device components, coupled with its medical-grade O-ring seal, allow the device to accommodate several wash steps with minimal sample loss.

Supplier: Trajan Scientific and Medical

The ZPure™ H₂O 'High Sensitivity Moisture Indicating' Filter is used for applications requiring high efficiency moisture removal. The high sensitivity indicator signals breakthrough at 1 ppm water and changes from blue to brown.

Supplier: Whatman products (Cytiva)

Filter paper, qualitative, Whatman™, Grade F319-04, 44 mm

Supplier: Merck

Syringe filters with hydrophobic PVDF membrane. Used in vacuum line protection, transducer protection and gas filtration. Available as either 25 mm or pump-driven Millex®-FG₅₀ 50 mm diameter filters.