Supplier: UPCHURCH SCIENTIFIC

These filters are ideal for higher pressure applications and to help prevent particulate contamination.

Supplier: VICI JOUR RESEARCH

Precolumn filter kit has a standard 10 to 32 fitting and fits direct to most column types without introducing an additional dead volume.

Supplier: Thermo Fisher Scientific

Filter cartridge, Replacement cartridges for DI 425, pack of 2

Supplier: Restek

This trap removes hydrocarbons and other contaminants. It fits in GC oven for easy thermal recharging.

Supplier: Restek

This thermal gas purifier removes oxygen, water, carbon monoxide, carbon dioxide, hydrocarbons (except methane) to ppb levels which is pure enough for MS.

Supplier: VICI JOUR RESEARCH

The Last Drop filter/sparger combines filtration and sparging in a single unit. The PTFE housing contains a mobile phase filter with either a stainless steel or PTFE filter element. Connect the solvent line to the stepped connector, which accommodates 1,5, 2,2, and 3,5 mm ID tubing. A 1/4"-28 fitting connector connects a 1/8" helium line connects to the 10 µm sparger. Both connectors are PEEK.

Supplier: Restek

Packed with an extremely high surface area, baked coconut shell based activated carbon.

Supplier: Restek

This gas management system removes moisture, hydrocarbons, and oxygen from carrier gas, extending column lifetime.

Supplier: GLASWARENFABRIK KARL HECHT

Filter cartridge, Type: Spare cartridge for Aquademat mixed-bed deioniser

Supplier: Restek

High-capacity split vent traps reduce the release of hazardous materials from the capillary split vent into the lab.

Supplier: Restek

Click-on traps measure 21,6×3,2 cm.

Supplier: Restek

This molecular sieve S-trap is suitable for traping water vapour and also increases column and oxygen trap lifetime.

Supplier: Restek

These high-capacity moisture traps are purged with ultra-high-purity helium and are ready to be used with any carrier gas including hydrogen.

Supplier: Restek

Click-on traps measure 215,9×31,75 mm.

Supplier: Restek

These traps have a heavy-walled with glass body, protected by PC sleeve, which prevents oxygen and water infusion. Indicator changes from light green to grey as oxygen is trapped.

Supplier: UPCHURCH SCIENTIFIC

These in-line MicroFilters effectively protect columns from particles originating in the mobile phase or sample, or from pump seal and sample injection valve wear.

Supplier: Merck

High throughput: Each cartridge contains 150 membranes. Less frequent reloading saves time.

Visible traceability: The membrane catalog number, lot number, pore size and sequential number (from 150 to 1) are printed on the protective film of every membrane cell.

Supplier: Restek

Hydrocarbon trap removes trace impurities from carrier gas. A 60 μm frit prevents gas contamination by purifier particles.

Supplier: Restek

This trap reduces the release of hazardous materials from the ECD vent into the lab.

Supplier: Restek

These high-capacity oxygen trap removes up to 135 ml of oxygen or 2 g of water.

Supplier: Restek

These gas-specific purifier modules are optimised by incorporating a multiple-bed format that progressively lowers concentrations of contaminants at each successive bed. Replace separate oxygen, moisture and hydrocarbon traps with one multiple-bed purifier, specific for purifying helium, hydrogen, nitrogen or air.

Supplier: Sartorius

Polyethersulfone membrane
The robust polyethersulfone membrane (PESU) is a polymer, stable within a broad pH (1 to 14) and temperature range. Membrane regeneration and depyrogenation is accomplished by using (1 N) NaOH at elevated temperatures. Cassettes are stored in 0,1 N NaOH.

Supplier: Merck

Durapore® Millipak® Final Fill Capsules

Supplier: Merck

The Viresolve^® pro solution provides a comprehensive, flexible template solution for viral clearance within mAb and recombinant protein bioproduction. This proven viral clearance solution delivers the highest levels of retention assurance and productivity across a broad range of feed stream characteristics.

Supplier: Restek

These indicating hydrocarbon traps for air compressors remove oil vapours and mist as it passes compressed air from an oil-filled air compressor. Indicator changes from pale pink to deep pink.

Supplier: Restek

This gas purification system with triple gas trap is ideal for purifying carrier gas and it contains oxygen, moisture, and hydrocarbon scrubbers in one cartridge.

Supplier: Restek

Moisture trap reduces water to less than 10 ppb. Indicator changes from yellowish green to blue at 5% relative humidity. A 10 μm frit prevents microparticulate damage to needle valves and flow controllers.

Supplier: Hach

This membrane filtration set can be used for filtration of turbid samples for the determination of dissolved ingredients.

Supplier: Thermo Fisher Scientific

The cartridge is designed for non-pressure applications, it includes 1 cm barbed hose connections on each end. The 100% virgin polypropylene cartridge rinses to high quality quickly. A colour indicator shows when the resin cartridge is exhausted.

Supplier: Restek

CarboFrit™ plugs are specifically designed to be slightly larger in OD than the 4 mm ID of glass liners. This allows the plug to conform to the ID of the glass liner, preventing voids in the packing.