Supplier: Cytiva (Formerly Pall Lab)

Tangential flow system, Centramate™ Cassette Holders, Polyethylene Holder with Centramate Cassette Stainless Steel Top and Bottom, Brace plates, Assorted Fittings, Torque Wrench and Socket

Supplier: Corning

PS bottle top vacuum filters with adapters colour coded by membrane type: Polyethersulfone (PES) yellow; cellulose acetate (CA) orange; nylon (NY) red.

Supplier: Sartorius

CA prefilters prevent early blockage of downstream sterilising grade membrane filters. The heterogeneous double layer construction provides optimal retention and throughput.

Supplier: Restek

High-pressure cup-type filter made up of 316 stainless steel which is used in fluid streams operating to 1034 bar.

Supplier: GLASWARENFABRIK KARL HECHT

Smooth and medium fast filter papers, suitable for the analysis of fats (due to low ether-soluble residue).

Supplier: Restek

The flat filter element sits parallel to the bottom of the mobile phase reservoir, allowing the filter to draw 98% of the mobile phase without drawing air into the system. Conventional cylindrical mobile phase filters begin to draw air into the system when approximately 10% of the solvent remains in the reservoir.

Supplier: Restek

These filter are made of cellulose or glass fibre. Ideal for ASE® 200 extraction cells.

Supplier: MACHEREY-NAGEL

Filter papers with ion exchange resin.

Supplier: Sartorius

To affinity and beyond: Fast, flexible and future-proof antibody purification.

Supplier: GLASWARENFABRIK KARL HECHT

Folded filter papers are suitable for the analysis of fats (due to low ether-soluble residue).

Supplier: Restek

This solvent filter is made up of borosilicate glass and is used to prevent the particulates and microbial growth in the solvents from entering the system.

Supplier: Restek

Thomson SINGLE StEP low evaporation filter vials with screw-top caps, 0,45 µm, PTFE with low-evaporation cap, blue cap, 100 pack.

Supplier: Ahlstrom-Munksjö

These plain white non sterile microfiltration membranes are used to remove particles and microorganisms from various organic solvents and aqueous solutions.

Supplier: Restek

A 316 stainless steel knurled cap and Tefzel CPI ferrule seal to ¹/₈" Ext.Ø PTFE tubing when finger tightened onto the precision-machined filter holder.

Supplier: Sartorius

Ready-to-connect units contains a multi-step combination of filters for effective and economical particle removal.

Supplier: Ahlstrom-Munksjö

These syringe filters are suitable for convenient sample preparation and fluid sterilization. The syringe filters for highly loaded aqueous solutions including a glass fiber prefilter and a cellulose acetate membrane are also available with MBS housing and male Luer lock outlet.

Supplier: Restek

Titanium filter in a stainless steel body with PEEK ferrule. Its design easily fits with all columns.

Supplier: Restek

Syringe filters with hydrophobic PTFE membranes and PP housing are used for organic solvents, acids, alcohols, bases and aromatics.

Supplier: Cytiva (Formerly Pall Lab)

T-series centramate cassettes with Omega™ membrane are ideal for development, pilot, and production scale TFF applications in diverse biological and biopharmaceutical processes.

Supplier: Sartorius

Glass fibre, PP support layers. They are self-contained, ready to use filter units for removal of contaminants like colloids, lipids, protein aggregates and particles from bio-pharmaceutical fluids. They are used for protection of membrane filters, chromatography- and ultrafiltration systems.

Supplier: Cytiva (Formerly Pall Lab)

Tangential flow cassette, Centramate™, Membrane: Supor®, Filtration area: 200, Pore size: 0,2 µm

Supplier: Cytiva (Formerly Pall Lab)

These systems are designed for use in diafiltration procedures which are faster and more efficient than dialysis for buffer exchange and desalting, and for concentration of dilute sample volumes of up to five litres.

Supplier: Sartorius

Sartopore® Platinum sterilising grade MidiCaps® are self-contained sterile filter units designed for pharmaceutical and biotechnology industry. These filters contain a unique heterogeneous double layer of hydrophilised polyethersulfone membranes and are specially designed to meet the requirements for filtration of a broad range of pharmaceutical products.

Supplier: Ahlstrom-Munksjö

These gridded sterile membranes are specifically designed to save time when performing colony counting and microbiological quality control. The plain white non-sterile microfiltration membranes are used to remove particles and microorganisms from various organic solvents and aqueous solutions.

Supplier: Cytiva (Formerly Pall Lab)

The disposable Minimate™ TFF capsules, with Omega™ membrane, can perform concentration processes desalting or buffer exchange on the same system with minimal user intervention, and achieves high concentration factors in a single step due to the low hold-up volume of the devices.

Supplier: Spectrum Laboratories

SIUS PD cassette with HyStream membrane type and molecular weight cut-off (MWCO) of 300kD.

Supplier: Restek

SINGLE StEP® eXtreme filter vials are recommended for samples containing less than 30% solid particulates and also offers fast sample filtration with a squeeze of the fingers. Fit most standard 12×32 mm autosamplers, including UHPLC instruments. It allow compounds to be separated from matrix, resulting in both higher signal-to-noise ratios and more differentiated peaks.

Supplier: Restek

Standard filter vials are recommended for samples containing less than 10% solid particulates and also offers fast sample filtration with a squeeze of the fingers. Fit most standard 12×32 mm autosamplers, including UHPLC instruments. Nylon, PES, PTFE and PVDF membranes.

Supplier: Corning

Vacuum filter systems available in four sizes: 150, 250, 500 ml and 1 L. Adapters are colour coded by membrane type for easy product identification: Polyethersulfone (PES) yellow; cellulose acetate (CA) orange; cellulose nitrate (CN) blue; nylon (NY) red.

Supplier: Cytiva (Formerly Pall Lab)

Tangential flow cassette, Omega™, Filtration area: 4600 cm², MWCO: 300k